unit epanet2;
|
|
{ Declarations of imported procedures from the EPANET PROGRAMMERs TOOLKIT }
|
{ (EPANET2.DLL) }
|
|
{Last updated on 11/12/19}
|
|
interface
|
|
const
|
|
{ These are codes used by the DLL functions }
|
EN_MAXID = 31; { Max. # characters in ID name }
|
EN_MAXMSG = 255; { Max. # characters in strings }
|
EN_MISSING = -1.E10;
|
|
EN_ELEVATION = 0; { Node parameters }
|
EN_BASEDEMAND = 1;
|
EN_PATTERN = 2;
|
EN_EMITTER = 3;
|
EN_INITQUAL = 4;
|
EN_SOURCEQUAL = 5;
|
EN_SOURCEPAT = 6;
|
EN_SOURCETYPE = 7;
|
EN_TANKLEVEL = 8;
|
EN_DEMAND = 9;
|
EN_HEAD = 10;
|
EN_PRESSURE = 11;
|
EN_QUALITY = 12;
|
EN_SOURCEMASS = 13;
|
EN_INITVOLUME = 14;
|
EN_MIXMODEL = 15;
|
EN_MIXZONEVOL = 16;
|
|
EN_TANKDIAM = 17;
|
EN_MINVOLUME = 18;
|
EN_VOLCURVE = 19;
|
EN_MINLEVEL = 20;
|
EN_MAXLEVEL = 21;
|
EN_MIXFRACTION = 22;
|
EN_TANK_KBULK = 23;
|
EN_TANKVOLUME = 24;
|
EN_MAXVOLUME = 25;
|
EN_CANOVERFLOW = 26;
|
EN_DEMANDDEFICIT = 27;
|
|
EN_DIAMETER = 0; { Link parameters }
|
EN_LENGTH = 1;
|
EN_ROUGHNESS = 2;
|
EN_MINORLOSS = 3;
|
EN_INITSTATUS = 4;
|
EN_INITSETTING = 5;
|
EN_KBULK = 6;
|
EN_KWALL = 7;
|
EN_FLOW = 8;
|
EN_VELOCITY = 9;
|
EN_HEADLOSS = 10;
|
EN_STATUS = 11;
|
EN_SETTING = 12;
|
EN_ENERGY = 13;
|
EN_LINKQUAL = 14;
|
EN_LINKPATTERN = 15;
|
EN_PUMP_STATE = 16;
|
EN_PUMP_EFFIC = 17;
|
EN_PUMP_POWER = 18;
|
EN_PUMP_HCURVE = 19;
|
EN_PUMP_ECURVE = 20;
|
EN_PUMP_ECOST = 21;
|
EN_PUMP_EPAT = 22;
|
|
EN_DURATION = 0; { Time parameters }
|
EN_HYDSTEP = 1;
|
EN_QUALSTEP = 2;
|
EN_PATTERNSTEP = 3;
|
EN_PATTERNSTART = 4;
|
EN_REPORTSTEP = 5;
|
EN_REPORTSTART = 6;
|
EN_RULESTEP = 7;
|
EN_STATISTIC = 8;
|
EN_PERIODS = 9;
|
EN_STARTTIME = 10;
|
EN_HTIME = 11;
|
EN_QTIME = 12;
|
EN_HALTFLAG = 13;
|
EN_NEXTEVENT = 14;
|
EN_NEXTEVENTTANK = 15;
|
|
EN_ITERATIONS = 0; { Analysis statistics }
|
EN_RELATIVEERROR = 1;
|
EN_MAXHEADERROR = 2;
|
EN_MAXFLOWCHANGE = 3;
|
EN_MASSBALANCE = 4;
|
EN_DEFICIENTNODES = 5;
|
EN_DEMANDREDUCTION = 6;
|
|
EN_NODE = 0; { Component Types }
|
EN_LINK = 1;
|
EN_TIMEPAT = 2;
|
EN_CURVE = 3;
|
EN_CONTROL = 4;
|
EN_RULE = 5;
|
|
EN_NODECOUNT = 0; { Component counts }
|
EN_TANKCOUNT = 1;
|
EN_LINKCOUNT = 2;
|
EN_PATCOUNT = 3;
|
EN_CURVECOUNT = 4;
|
EN_CONTROLCOUNT = 5;
|
EN_RULECOUNT = 6;
|
|
EN_JUNCTION = 0; { Node types }
|
EN_RESERVOIR = 1;
|
EN_TANK = 2;
|
|
EN_CVPIPE = 0; { Link types }
|
EN_PIPE = 1;
|
EN_PUMP = 2;
|
EN_PRV = 3;
|
EN_PSV = 4;
|
EN_PBV = 5;
|
EN_FCV = 6;
|
EN_TCV = 7;
|
EN_GPV = 8;
|
|
EN_CLOSED = 0; { Link status types }
|
EN_OPEN = 1;
|
|
EN_PUMP_XHEAD = 0; { Pump state types }
|
EN_PUMP_CLOSED = 2;
|
EN_PUMP_OPEN = 3;
|
EN_PUMP_XFLOW = 5;
|
|
EN_NONE = 0; { Quality analysis types }
|
EN_CHEM = 1;
|
EN_AGE = 2;
|
EN_TRACE = 3;
|
|
EN_CONCEN = 0; { Source quality types }
|
EN_MASS = 1;
|
EN_SETPOINT = 2;
|
EN_FLOWPACED = 3;
|
|
EN_HW = 0; { Head loss formulas }
|
EN_DW = 1;
|
EN_CM = 2;
|
|
EN_CFS = 0; { Flow units types }
|
EN_GPM = 1;
|
EN_MGD = 2;
|
EN_IMGD = 3;
|
EN_AFD = 4;
|
EN_LPS = 5;
|
EN_LPM = 6;
|
EN_MLD = 7;
|
EN_CMH = 8;
|
EN_CMD = 9;
|
|
EN_DDA = 0; { Demand model types }
|
EN_PDA = 1;
|
|
EN_TRIALS = 0; { Option types }
|
EN_ACCURACY = 1;
|
EN_TOLERANCE = 2;
|
EN_EMITEXPON = 3;
|
EN_DEMANDMULT = 4;
|
EN_HEADERROR = 5;
|
EN_FLOWCHANGE = 6;
|
EN_HEADLOSSFORM = 7;
|
EN_GLOBALEFFIC = 8;
|
EN_GLOBALPRICE = 9;
|
EN_GLOBALPATTERN = 10;
|
EN_DEMANDCHARGE = 11;
|
EN_SP_GRAVITY = 12;
|
EN_SP_VISCOS = 13;
|
EN_EXTRA_ITER = 14;
|
EN_CHECKFREQ = 15;
|
EN_MAXCHECK = 16;
|
EN_DAMPLIMIT = 17;
|
EN_SP_DIFFUS = 18;
|
EN_BULKORDER = 19;
|
EN_WALLORDER = 20;
|
EN_TANKORDER = 21;
|
EN_CONCENLIMIT = 22;
|
|
EN_LOWLEVEL = 0; { Control types }
|
EN_HILEVEL = 1;
|
EN_TIMER = 2;
|
EN_TIMEOFDAY = 3;
|
|
EN_SERIES = 0; { Report statistic types }
|
EN_AVERAGE = 1;
|
EN_MINIMUM = 2;
|
EN_MAXIMUM = 3;
|
EN_RANGE = 4;
|
|
EN_MIX1 = 0; { Tank mixing models }
|
EN_MIX2 = 1;
|
EN_FIFO = 2;
|
EN_LIFO = 3;
|
|
EN_NOSAVE = 0; { Hydraulics flags }
|
EN_SAVE = 1;
|
EN_INITFLOW = 10;
|
EN_SAVE_AND_INIT = 11;
|
|
EN_CONST_HP = 0; { Pump curve types }
|
EN_POWER_FUNC = 1;
|
EN_CUSTOM = 2;
|
EN_NOCURVE = 3;
|
|
EN_VOLUME_CURVE = 0; { Curve types }
|
EN_PUMP_CURVE = 1;
|
EN_EFFIC_CURVE = 2;
|
EN_HLOSS_CURVE = 3;
|
EN_GENERIC_CURVE = 4;
|
|
EN_UNCONDITIONAL = 0; { Deletion action codes }
|
EN_CONDITIONAL = 1;
|
|
EN_NO_REPORT = 0; { Status reporting levels }
|
EN_NORMAL_REPORT = 1;
|
EN_FULL_REPORT = 2;
|
|
EN_R_NODE = 6; { Rule-based control objects }
|
EN_R_LINK = 7;
|
EN_R_SYSTEM = 8;
|
|
EN_R_DEMAND = 0; { Rule-based control variables }
|
EN_R_HEAD = 1;
|
EN_R_GRADE = 2;
|
EN_R_LEVEL = 3;
|
EN_R_PRESSURE = 4;
|
EN_R_FLOW = 5;
|
EN_R_STATUS = 6;
|
EN_R_SETTING = 7;
|
EN_R_POWER = 8;
|
EN_R_TIME = 9;
|
EN_R_CLOCKTIME = 10;
|
EN_R_FILLTIME = 11;
|
EN_R_DRAINTIME = 12;
|
|
EN_R_EQ = 0; { Rule-based control operators }
|
EN_R_NE = 1;
|
EN_R_LE = 2;
|
EN_R_GE = 3;
|
EN_R_LT = 4;
|
EN_R_GT = 5;
|
EN_R_IS = 6;
|
EN_R_NOT = 7;
|
EN_R_BELOW = 8;
|
EN_R_ABOVE = 9;
|
|
EN_R_IS_OPEN = 1; { Rule-based control link status }
|
EN_R_IS_CLOSED = 2;
|
EN_R_IS_ACTIVE = 3;
|
|
EpanetLib = 'epanet2.dll';
|
|
{Project Functions}
|
function ENepanet(F1: PAnsiChar; F2: PAnsiChar; F3: PAnsiChar; F4: Pointer): Integer; stdcall; external EpanetLib;
|
function ENinit(F2: PAnsiChar; F3: PAnsiChar; UnitsType: Integer; HeadlossType: Integer): Integer; stdcall; external EpanetLib;
|
function ENopen(F1: PAnsiChar; F2: PAnsiChar; F3: PAnsiChar): Integer; stdcall; external EpanetLib;
|
function ENgetcount(Code: Integer; var Count: Integer): Integer; stdcall; external EpanetLib;
|
function ENgettitle(Line1: PAnsiChar; Line2: PAnsiChar; Line3: PAnsiChar): Integer; stdcall; external EpanetLib;
|
function ENsettitle(Line1: PAnsiChar; Line2: PAnsiChar; Line3: PAnsiChar): Integer; stdcall; external EpanetLib;
|
function ENgetcomment(ObjType: Integer; Index: Integer; Comment: PAnsiChar): Integer; stdcall; external EpanetLib;
|
function ENsetcomment(ObjType: Integer; Index: Integer; Comment: PAnsiChar): Integer; stdcall; external EpanetLib;
|
function ENsaveinpfile(F: PAnsiChar): Integer; stdcall; external EpanetLib;
|
function ENclose: Integer; stdcall; external EpanetLib;
|
|
{Hydraulic Functions}
|
function ENsolveH: Integer; stdcall; external EpanetLib;
|
function ENsaveH: Integer; stdcall; external EpanetLib;
|
function ENopenH: Integer; stdcall; external EpanetLib;
|
function ENinitH(SaveFlag: Integer): Integer; stdcall; external EpanetLib;
|
function ENrunH(var T: LongInt): Integer; stdcall; external EpanetLib;
|
function ENnextH(var Tstep: LongInt): Integer; stdcall; external EpanetLib;
|
function ENcloseH: Integer; stdcall; external EpanetLib;
|
function ENsavehydfile(F: PAnsiChar): Integer; stdcall; external EpanetLib;
|
function ENusehydfile(F: PAnsiChar): Integer; stdcall; external EpanetLib;
|
|
{Quality Functions}
|
function ENsolveQ: Integer; stdcall; external EpanetLib;
|
function ENopenQ: Integer; stdcall; external EpanetLib;
|
function ENinitQ(SaveFlag: Integer): Integer; stdcall; external EpanetLib;
|
function ENrunQ(var T: LongInt): Integer; stdcall; external EpanetLib;
|
function ENnextQ(var Tstep: LongInt): Integer; stdcall; external EpanetLib;
|
function ENstepQ(var Tleft: LongInt): Integer; stdcall; external EpanetLib;
|
function ENcloseQ: Integer; stdcall; external EpanetLib;
|
|
{Reporting Functions}
|
function ENwriteline(S: PAnsiChar): Integer; stdcall; external EpanetLib;
|
function ENreport: Integer; stdcall; external EpanetLib;
|
function ENcopyreport(F: PAnsiChar): Integer; stdcall; external EpanetLib;
|
function ENclearreport: Integer; stdcall; external EpanetLib;
|
function ENresetreport: Integer; stdcall; external EpanetLib;
|
function ENsetreport(S: PAnsiChar): Integer; stdcall; external EpanetLib;
|
function ENsetstatusreport(Code: Integer): Integer; stdcall; external EpanetLib;
|
function ENgetversion(var Version: Integer): Integer; stdcall; external EpanetLib;
|
function ENgeterror(Errcode: Integer; Errmsg: PAnsiChar; MaxLen: Integer): Integer; stdcall; external EpanetLib;
|
function ENgetstatistic(StatType: Integer; var Value: Single): Integer; stdcall; external EpanetLib;
|
function ENgetresultindex(Code: Integer; Index: Integer; var Value: Integer): Integer; stdcall; external EpanetLib;
|
|
{Analysis Options Functions}
|
function ENgetoption(Code: Integer; var Value: Single): Integer; stdcall; external EpanetLib;
|
function ENsetoption(Code: Integer; Value: Single): Integer; stdcall; external EpanetLib;
|
function ENgetflowunits(var Code: Integer): Integer; stdcall; external EpanetLib;
|
function ENsetflowunits(Code: Integer): Integer; stdcall; external EpanetLib;
|
function ENgettimeparam(Code: Integer; var Value: LongInt): Integer; stdcall; external EpanetLib;
|
function ENsettimeparam(Code: Integer; Value: LongInt): Integer; stdcall; external EpanetLib;
|
function ENgetqualinfo(var QualType: Integer; ChemName: PAnsiChar; ChemUnits: PAnsiChar; var TraceNode: Integer): Integer; stdcall; external EpanetLib;
|
function ENgetqualtype(var QualCode: Integer; var TraceNode: Integer): Integer; stdcall; external EpanetLib;
|
function ENsetqualtype(QualCode: Integer; ChemName: PAnsiChar; ChemUnits: PAnsiChar; TraceNodeID: PAnsiChar): Integer; stdcall; external EpanetLib;
|
|
{Node Functions}
|
function ENaddnode(ID: PAnsiChar; NodeType: Integer; var Index: Integer): Integer; stdcall; external EpanetLib;
|
function ENdeletenode(Index: Integer; ActionCode: Integer): Integer; stdcall; external EpanetLib;
|
function ENgetnodeindex(ID: PAnsiChar; var Index: Integer): Integer; stdcall; external EpanetLib;
|
function ENgetnodeid(Index: Integer; ID: PAnsiChar): Integer; stdcall; external EpanetLib;
|
function ENsetnodeid(Index: Integer; NewID: PAnsiChar): Integer; stdcall; external EpanetLib;
|
function ENgetnodetype(Index: Integer; var Code: Integer): Integer; stdcall; external EpanetLib;
|
function ENgetnodevalue(Index: Integer; Code: Integer; var Value: Single): Integer; stdcall; external EpanetLib;
|
function ENsetnodevalue(Index: Integer; Code: Integer; Value: Single): Integer; stdcall; external EpanetLib;
|
function ENsetjuncdata(Index: Integer; Elev: Single; Dmnd: Single; DmndPat: PAnsiChar): Integer; stdcall; external EpanetLib;
|
function ENsettankdata(Index: Integer; Elev, InitLvl, MinLvl, MaxLvl, Diam, MinVol: Single; VolCurve: PAnsiChar): Integer; stdcall; external EpanetLib;
|
function ENgetcoord(Index: Integer; var X: Double; var Y: Double): Integer; stdcall; external EpanetLib;
|
function ENsetcoord(Index: Integer; X: Double; Y: Double): Integer; stdcall; external EpanetLib;
|
|
{Demand Functions}
|
function ENgetdemandmodel(var Model: Integer; var Pmin: Single; var Preq: Single; var Pexp: Single): Integer; stdcall; external EpanetLib;
|
function ENsetdemandmodel(Model: Integer; Pmin: Single; Preq: Single; Pexp: Single): Integer; stdcall; external EpanetLib;
|
function ENgetnumdemands(NodeIndex: Integer; var NumDemands: Integer): Integer; stdcall; external EpanetLib;
|
function ENadddemand(NodeIndex: Integer; BaseDemand: Single; PatName: PAnsiChar; DemandName: PAnsiChar): Integer; stdcall; external EpanetLib;
|
function ENdeletedemand(NodeIndex: Integer; DemandIndex: Integer): Integer; stdcall; external EpanetLib;
|
function ENgetdemandindex(NodeIndex: Integer; DemandName: PAnsiChar; var DemandIndex: Integer): Integer; stdcall; external EpanetLib;
|
function ENgetbasedemand(NodeIndex: Integer; DemandIndex: Integer; var BaseDemand: Single): Integer; stdcall; external EpanetLib;
|
function ENsetbasedemand(NodeIndex: Integer; DemandIndex: Integer; BaseDemand: Single): Integer; stdcall; external EpanetLib;
|
function ENgetdemandpattern(NodeIndex: Integer; DemandIndex: Integer; var PatIndex: Integer): Integer; stdcall; external EpanetLib;
|
function ENsetdemandpattern(NodeIndex: Integer; DemandIndex: Integer; PatIndex: Integer): Integer; stdcall; external EpanetLib;
|
function ENgetdemandname(NodeIndex: Integer; DemandIndex: Integer; DemandName: PAnsiChar): Integer; stdcall; external EpanetLib;
|
function ENsetdemandname(NodeIndex: Integer; DemandIndex: Integer; DemandName: PAnsiChar): Integer; stdcall; external EpanetLib;
|
|
{Link Functions}
|
function ENaddlink(ID: PAnsiChar; LinkType: Integer; FromNode: PAnsiChar; ToNode: PAnsiChar; var Index: Integer): Integer; stdcall; external EpanetLib;
|
function ENdeletelink(Index: Integer; ActionCode: Integer): Integer; stdcall; external EpanetLib;
|
function ENgetlinkindex(ID: PAnsiChar; var Index: Integer): Integer; stdcall; external EpanetLib;
|
function ENgetlinkid(Index: Integer; ID: PAnsiChar): Integer; stdcall; external EpanetLib;
|
function ENsetlinkid(Index: Integer; ID: PAnsiChar): Integer; stdcall; external EpanetLib;
|
function ENgetlinktype(Index: Integer; var Code: Integer): Integer; stdcall; external EpanetLib;
|
function ENsetlinktype(var Index: Integer; LinkType: Integer; ActionCode: Integer): Integer; stdcall; external EpanetLib;
|
function ENgetlinknodes(Index: Integer; var Node1: Integer; var Node2: Integer): Integer; stdcall; external EpanetLib;
|
function ENsetlinknodes(Index: Integer; Node1: Integer; Node2: Integer): Integer; stdcall; external EpanetLib;
|
function ENgetlinkvalue(Index: Integer; Code: Integer; var Value: Single): Integer; stdcall; external EpanetLib;
|
function ENsetlinkvalue(Index: Integer; Code: Integer; Value: Single): Integer; stdcall; external EpanetLib;
|
function ENsetpipedata(Index: Integer; Length: Single; Diam: Single; Rough: Single; Mloss:Single): Integer; stdcall; external EpanetLib;
|
|
function ENgetvertexcount(Index: Integer; var Count: Integer): Integer; stdcall; external EpanetLib;
|
function ENgetvertex(Index: Integer; Vertex: Integer; var X: Double; var Y: Double): Integer; stdcall; external EpanetLib;
|
function ENsetvertices(Index: Integer; var X: Double; var Y: Double; Count: Integer): Integer; stdcall; external EpanetLib;
|
|
{Pump Functions}
|
function ENgetpumptype(LinkIndex: Integer; var PumpType: Integer): Integer; stdcall; external EpanetLib;
|
function ENgetheadcurveindex(LinkIndex: Integer; var CurveIndex: Integer): Integer; stdcall; external EpanetLib;
|
function ENsetheadcurveindex(LinkIndex: Integer; CurveIndex: Integer): Integer; stdcall; external EpanetLib;
|
|
{Pattern Functions}
|
function ENaddpattern(ID: PAnsiChar): Integer; stdcall; external EpanetLib;
|
function ENdeletepattern(Index: Integer): Integer; stdcall; external EpanetLib;
|
function ENgetpatternindex(ID: PAnsiChar; var Index: Integer): Integer; stdcall; external EpanetLib;
|
function ENgetpatternid(Index: Integer; ID: PAnsiChar): Integer; stdcall; external EpanetLib;
|
function ENsetpatternid(Index: Integer; ID: PAnsiChar): Integer; stdcall; external EpanetLib;
|
function ENgetpatternlen(Index: Integer; var Len: Integer): Integer; stdcall; external EpanetLib;
|
function ENgetpatternvalue(Index: Integer; Period: Integer; var Value: Single): Integer; stdcall; external EpanetLib;
|
function ENsetpatternvalue(Index: Integer; Period: Integer; Value: Single): Integer; stdcall; external EpanetLib;
|
function ENgetaveragepatternvalue(Index: Integer; var Value: Single): Integer; stdcall; external EpanetLib;
|
function ENsetpattern(Index: Integer; var F: Single; N: Integer): Integer; stdcall; external EpanetLib;
|
|
{Curve Functions}
|
function ENaddcurve(ID: PAnsiChar): Integer; stdcall; external EpanetLib;
|
function ENdeletecurve(Index: Integer): Integer; stdcall; external EpanetLib;
|
function ENgetcurveindex(ID: PAnsiChar; var Index: Integer): Integer; stdcall; external EpanetLib;
|
function ENgetcurveid(Index: Integer; ID: PAnsiChar): Integer; stdcall; external EpanetLib;
|
function ENsetcurveid(Index: Integer; ID: PAnsiChar): Integer; stdcall; external EpanetLib;
|
function ENgetcurvelen(Index: Integer; var Len: Integer): Integer; stdcall; external EpanetLib;
|
function ENgetcurvetype(Index: Integer; var CurveType: Integer): Integer; stdcall; external EpanetLib;
|
function ENgetcurvevalue(CurveIndex: Integer; PointIndex: Integer; var X: Single; var Y: Single): Integer; stdcall; external EpanetLib;
|
function ENsetcurvevalue(CurveIndex: Integer; PointIndex: Integer; X: Single; Y: Single): Integer; stdcall; external EpanetLib;
|
function ENgetcurve(Index: Integer; ID: PAnsiChar; var N: Integer; var X: Single; var Y: Single): Integer; stdcall; external EpanetLib;
|
function ENsetcurve(Index: Integer; var X: Single; var Y: Single; N: Integer): Integer; stdcall; external EpanetLib;
|
|
{Control Functions}
|
function ENaddcontrol(Ctype: Integer; Link: Integer; Setting: Single; Node: Integer; Level: Single; var Index: Integer): Integer; stdcall; external EpanetLib;
|
function ENdeletecontrol(Index: Integer): Integer; stdcall; external EpanetLib;
|
function ENgetcontrol(Index: Integer; var Ctype: Integer; var Link: Integer; var Setting: Single; var Node: Integer; var Level: Single): Integer; stdcall; external EpanetLib;
|
function ENsetcontrol(Index: Integer; Ctype: Integer; Link: Integer; Setting: Single; Node: Integer; Level: Single): Integer; stdcall; external EpanetLib;
|
|
{Rule-Based Control Functions}
|
function ENaddrule(Rule: PAnsiChar): Integer; stdcall; external EpanetLib;
|
function ENdeleterule(Index: Integer): Integer; stdcall; external EpanetLib;
|
function ENgetrule(Index: Integer; var Npremises: Integer; var NthenActions: Integer;
|
var NelseActions: Integer; var Priority: Single): Integer; stdcall; external EpanetLib;
|
function ENgetruleID(Index: Integer; ID: PAnsiChar): Integer; stdcall; external EpanetLib;
|
function ENsetrulepriority(Index: Integer; Priority: Single): Integer; stdcall; external EpanetLib;
|
function ENgetpremise(RuleIndex: Integer; PremiseIndex: Integer; var LogOp: Integer;
|
var ObjType: Integer; var ObjIndex: Integer; var Param: Integer; var RelOp: Integer;
|
var Status: Integer; var Value: Single): Integer; stdcall; external EpanetLib;
|
function ENsetpremise(RuleIndex: Integer; PremiseIndex: Integer; LogOp: Integer; ObjType: Integer;
|
ObjIndex: Integer; Param: Integer; RelOp: Integer; Status: Integer; Value: Single): Integer; stdcall; external EpanetLib;
|
function ENsetpremiseindex(RuleIndex: Integer; PremiseIndex: Integer; ObjIndex: Integer): Integer; stdcall; external EpanetLib;
|
function ENsetpremisestatus(RuleIndex: Integer; PremiseIndex: Integer; Status: Integer): Integer; stdcall; external EpanetLib;
|
function ENsetpremisevalue(RuleIndex: Integer; PremiseIndex: Integer; Value: Single): Integer; stdcall; external EpanetLib;
|
function ENgetthenaction(RuleIndex: Integer; ActionIndex: Integer; var LinkIndex: Integer;
|
var Status: Integer; var Setting: Single): Integer; stdcall; external EpanetLib;
|
function ENsetthenaction(RuleIndex: Integer; ActionIndex: Integer; LinkIndex: Integer;
|
Status: Integer; Setting: Single): Integer; stdcall; external EpanetLib;
|
function ENgetelseaction(RuleIndex: Integer; ActionIndex: Integer; var LinkIndex: Integer;
|
var Status: Integer; var Setting: Single): Integer; stdcall; external EpanetLib;
|
function ENsetelseaction(RuleIndex: Integer; ActionIndex: Integer; LinkIndex: Integer;
|
Status: Integer; Setting: Single): Integer; stdcall; external EpanetLib;
|
|
implementation
|
|
end.
|
