HStation/XHS.V1.0.git

			@@ -1,10 +1,14 @@
			global using Yw.EPAnet;
			using DevExpress.Mvvm.Native;
			using DevExpress.Office.Utils;
			using DevExpress.Utils.Extensions;
			using DevExpress.Xpo.Helpers;
			using DevExpress.XtraBars.Ribbon;
			using DevExpress.XtraRichEdit.Layout;
			using DevExpress.XtraSpreadsheet.Commands;
			using HStation.WinFrmUI.PhartRelation;
			using System.Diagnostics;
			using System.Windows.Media;
			using System.Windows.Media.Media3D;
			using Yw.Pump;
			using Yw.Vmo;
			@@ -29,8 +33,6 @@
			private Yw.Model.HydroModelInfo _hydroInfo = null;//水力信息


			private Yw.WinFrmUI.HydroCheckResult _checkResult = null;//检查结果
			private Yw.EPAnet.CalcuResult _calcuResult = null;//计算结果

			/// <summary>
			/// 绑定数据
			@@ -106,8 +108,8 @@
			{
			return;
			}
			_selectedParter = obj;
			ShowProperty();
			_selectedVisual = obj;
			ShowSelectedProperty();
			};
			}
			return _bimfaceCtrl;
			@@ -147,9 +149,9 @@
			{
			return;
			}
			var allParterList = _hydroInfo.GetAllParters();
			_selectedParter = allParterList?.Find(x => x.Code == obj?.FirstOrDefault());
			ShowProperty();
			var allParterList = _hydroInfo.GetAllVisuals();
			_selectedVisual = allParterList?.Find(x => x.Code == obj?.FirstOrDefault());
			ShowSelectedProperty();
			};
			}
			return _q3dCtrl;
			@@ -165,7 +167,7 @@

			#endregion

			#region 构件属性
			#region 属性控件

			//属性控件
			private XhsProjectSimulationPropertyCtrl _propertyCtrl = null;
			@@ -226,15 +228,7 @@
			await Task.Delay(5000);
			await _bimfaceCtrl?.ClearBlinkComponents();
			};
			_propertyCtrl.PropertyValueChangedEvent += (parter) =>
			{
			if (parter == null)
			{
			return;
			}
			UpdateParterListProperty(parter);
			AutoApplyGrading();
			};

			_propertyCtrl.ViewParterEvent += (parter) =>
			{
			if (parter == null)
			@@ -243,13 +237,63 @@
			}
			_bimfaceCtrl?.ZoomToComponent(parter.Code);
			};
			_propertyCtrl.PropertyValueChangedEvent += (parter) =>
			{
			if (parter == null)
			{
			return;
			}
			UpdateVisualListCtrl();
			AutoApplyGrading();
			};
			_propertyCtrl.MarkPropertyValueChangedEvent += (parter) =>
			{
			//标注属性发生改变
			//判断当前是否有标注展示，若有则更新标注，最好是更新单个标注
			};
			_propertyCtrl.GradingPropertyValueChangedEvent += (parter) =>
			{
			//分级属性发生改变
			//判断当前是否有分级展示，若有则更新分级，最好是更新单个分级
			};
			_propertyCtrl.FlowDirectionPropertyValueChangedEvent += async (parter) =>
			{
			//流向属性发生改变
			//判断流向是否加载，如果加载则更新流向，最好是更新单个流向
			UpdateFlowEffect(parter);
			//await _bimfaceCtrl?.UnloadFlowEffectById(parter.Code);
			};

			}
			return _propertyCtrl;
			}

			//显示属性面板
			//属性控件是否可见
			private bool IsPropertyCtrlVisible
			{
			get
			{
			if (this.docPnlRight.Visibility == DevExpress.XtraBars.Docking.DockVisibility.Visible)
			{
			if (this.controlContainerRight.Controls.Count > 0)
			{
			if (this.controlContainerRight.Controls[0] is XhsProjectSimulationPropertyCtrl)
			{
			return true;
			}
			}
			}
			return false;
			}
			}

			//显示属性控件
			private void ShowPropertyCtrl()
			{
			if (IsPropertyCtrlVisible)
			{
			return;
			}
			var propertyCtrl = GetPropertyCtrl();
			this.controlContainerRight.Controls.Clear();
			this.controlContainerRight.Controls.Add(propertyCtrl);
			@@ -258,137 +302,46 @@
			this.docPnlRight.Width = 300;
			}

			//显示属性
			private void ShowProperty()
			//显示选择属性
			private void ShowSelectedProperty()
			{
			ShowSelectedProperty(_selectedVisual);
			}

			//显示选择属性
			private void ShowSelectedProperty(Yw.Model.HydroVisualInfo visual)
			{
			if (_hydroInfo == null)
			{
			return;
			}
			if (this.docPnlRight.Visibility == DevExpress.XtraBars.Docking.DockVisibility.Hidden)
			ShowPropertyCtrl();
			_selectedVisual = visual;
			if (_selectedVisual == null)
			{
			ShowPropertyCtrl();
			}
			if (_selectedParter == null)
			{
			_propertyCtrl?.CancelSelectParter();
			_propertyCtrl.SelectedObject = null;
			return;
			}
			_propertyCtrl?.SelectParter(_selectedParter.Code);

			var allCalcuResultList = GetCalcuResultList();
			if (allCalcuResultList != null && allCalcuResultList.Count > 0)
			{
			var calcuResult = allCalcuResultList.Find(x => x.Code == _selectedParter.Code);
			if (calcuResult != null)
			{
			_propertyCtrl?.UpdateCalcuProperty(calcuResult);
			}
			}
			_propertyCtrl.SelectedObject = GetVisualViewModel(_selectedVisual);
			}


			//更新选择属性
			private void UpdateSelectedProperty()
			{
			if (!IsPropertyCtrlVisible)
			{
			return;
			}
			if (_selectedVisual == null)
			{
			return;
			}
			_propertyCtrl?.UpdateRows();
			}

			#endregion

			#region 选择构件

			//选择构件
			private Yw.Model.HydroParterInfo _selectedParter = null;

			//更新选择组件属性
			private void UpdateSelectedParterProperty()
			{
			if (_selectedParter == null)
			{
			return;
			}
			_propertyCtrl?.UpdateProperty();

			}

			//更新选择组件计算属性
			private void UpdateSelectedParterCalcuProperty()
			{
			if (_selectedParter == null)
			{
			return;
			}
			var allCalcuResultList = GetCalcuResultList();
			if (allCalcuResultList == null \|\| allCalcuResultList.Count < 1)
			{
			return;
			}
			var calcuResult = allCalcuResultList.Find(x => x.Code == _selectedParter.Code);
			if (calcuResult == null)
			{
			return;
			}
			_propertyCtrl?.UpdateCalcuProperty(calcuResult);
			}

			//更新构件列表属性
			private void UpdateParterListProperty()
			{
			if (this.docPnlBottom.Visibility != DevExpress.XtraBars.Docking.DockVisibility.Visible)
			{
			return;
			}
			var parterListCtrl = this.controlContainerBottom.Controls[0] as Yw.WinFrmUI.HydroParterListCtrl;
			if (parterListCtrl == null)
			{
			return;
			}
			parterListCtrl.UpdateProperty();
			}

			//更新构件列表属性
			private void UpdateParterListProperty(Yw.Model.HydroParterInfo parter)
			{
			if (this.docPnlBottom.Visibility != DevExpress.XtraBars.Docking.DockVisibility.Visible)
			{
			return;
			}
			var parterListCtrl = this.controlContainerBottom.Controls[0] as Yw.WinFrmUI.HydroParterListCtrl;
			if (parterListCtrl == null)
			{
			return;
			}
			parterListCtrl.UpdateProperty(parter);
			}

			//更新构件列表属性
			private void UpdateParterListProperty(List<Yw.Model.HydroParterInfo> parterList)
			{
			if (this.docPnlBottom.Visibility != DevExpress.XtraBars.Docking.DockVisibility.Visible)
			{
			return;
			}
			var parterListCtrl = this.controlContainerBottom.Controls[0] as Yw.WinFrmUI.HydroParterListCtrl;
			if (parterListCtrl == null)
			{
			return;
			}
			parterListCtrl.UpdateProperty(parterList);
			}

			//更新构件列表计算属性
			private void UpdateParterListCalcuProperty()
			{
			if (this.docPnlBottom.Visibility != DevExpress.XtraBars.Docking.DockVisibility.Visible)
			{
			return;
			}
			var parterListCtrl = this.controlContainerBottom.Controls[0] as Yw.WinFrmUI.HydroParterListCtrl;
			if (parterListCtrl == null)
			{
			return;
			}
			var allCalcuResultList = GetCalcuResultList();
			parterListCtrl.UpdateCalcuProperty(allCalcuResultList);
			}

			#endregion

			#region 自动匹配

			@@ -405,15 +358,15 @@
			{
			return;
			}
			var allParterList = _hydroInfo.GetAllParters();
			_selectedParter = allParterList?.Find(x => x.Code == code);
			var allParterList = _hydroInfo.GetAllVisuals();
			_selectedVisual = allParterList?.Find(x => x.Code == code);
			var elementIds = new List<string>();
			if (_selectedParter != null)
			if (_selectedVisual != null)
			{
			elementIds.Add(_selectedParter.Code);
			elementIds.Add(_selectedVisual.Code);
			}
			await _bimfaceCtrl?.ZoomAndSelectComponents(elementIds);
			ShowProperty();
			ShowSelectedProperty();
			};
			_matchingListCtrl.ApplyMatchingEvent += (output) =>
			{
			@@ -468,18 +421,18 @@
			{
			return;
			}
			var allParterList = _hydroInfo.GetAllParters();
			_selectedParter = allParterList?.Find(x => x.Code == parter.Code);
			var allParterList = _hydroInfo.GetAllVisuals();
			_selectedVisual = allParterList?.Find(x => x.Code == parter.Code);
			var elementIds = new List<string>() { parter.Code };
			await _bimfaceCtrl?.ZoomAndSelectComponents(elementIds);
			ShowProperty();
			ShowSelectedProperty();
			};
			_unMatchingListCtrl.ViewModelEvent += async (parters) =>//查看模型
			{
			var codes = parters?.Select(x => x.Code).Distinct().ToList();
			await _bimfaceCtrl?.ZoomAndSelectComponents(codes);
			_selectedParter = null;
			ShowProperty();
			_selectedVisual = null;
			ShowSelectedProperty();
			};
			}
			return _unMatchingListCtrl;
			@@ -507,8 +460,11 @@

			#region 一键显隐

			//显隐编码列表
			private List<string> _fastShowHiddenCodeList = null;

			//一键显隐
			private async Task FastShowHidden()
			private async void FastShowHidden()
			{
			if (_hydroInfo == null)
			{
			@@ -530,85 +486,15 @@
			}
			}

			//显隐编码列表
			private List<string> _fastShowHiddenCodeList = null;

			//触发一键显隐
			private async void barBtnFastShowHidden_ItemClick(object sender, DevExpress.XtraBars.ItemClickEventArgs e)
			private void barBtnFastShowHidden_ItemClick(object sender, DevExpress.XtraBars.ItemClickEventArgs e)
			{
			await FastShowHidden();
			FastShowHidden();
			}

			#endregion

			#region 水力校验

			//校验控件
			private XhsProjectSimulationHydroCheckResultCtrl _checkCtrl = null;

			//获取校验控件
			private XhsProjectSimulationHydroCheckResultCtrl GetCheckCtrl()
			{
			if (_checkCtrl == null)
			{
			_checkCtrl = new XhsProjectSimulationHydroCheckResultCtrl();
			_checkCtrl.Dock = DockStyle.Fill;
			_checkCtrl.HydroClickEvent += async (code) =>
			{
			if (_hydroInfo == null)
			{
			return;
			}
			var elementIds = new List<string>();
			if (string.IsNullOrEmpty(code))
			{
			_selectedParter = null;
			}
			else
			{
			var allParterList = _hydroInfo.GetAllParters();
			_selectedParter = allParterList?.Find(x => x.Code == code);
			if (_selectedParter != null)
			{
			elementIds.Add(_selectedParter.Code);
			}
			}
			await _bimfaceCtrl?.ZoomAndSelectComponents(elementIds);
			ShowProperty();
			};
			}
			return _checkCtrl;
			}

			//显示检查控件
			private void ShowCheckCtrl()
			{
			if (_checkResult == null)
			{
			return;
			}
			var checkCtrl = GetCheckCtrl();
			checkCtrl.SetBindingData(_checkResult);
			this.controlContainerBottom.Controls.Clear();
			this.controlContainerBottom.Controls.Add(checkCtrl);
			this.docPnlBottom.Visibility = DevExpress.XtraBars.Docking.DockVisibility.Visible;
			this.docPnlBottom.Text = "检查结果";
			this.docPnlBottom.Height = 350;

			}

			//水力检查
			private void barBtnHydroCheck_ItemClick(object sender, DevExpress.XtraBars.ItemClickEventArgs e)
			{
			if (_hydroInfo == null)
			{
			return;
			}
			_checkResult = _hydroInfo.Check();
			ShowCheckCtrl();
			}

			#endregion

			#region 保存信息

			@@ -641,87 +527,9 @@

			#endregion

			#region 构件明细

			//构件明细控件
			private Yw.WinFrmUI.HydroParterListCtrl _parterListCtrl = null;

			//获取构件明细控件
			private Yw.WinFrmUI.HydroParterListCtrl GetParterListCtrl()
			{
			if (_parterListCtrl == null)
			{
			_parterListCtrl = new HydroParterListCtrl();
			_parterListCtrl.Dock = DockStyle.Fill;
			_parterListCtrl.HydroClickEvent += async (parter) =>
			{
			_selectedParter = parter;
			await _bimfaceCtrl?.ZoomAndSelectComponent(_selectedParter.Code);
			ShowProperty();
			};
			_parterListCtrl.HydroChangedEvent += (parterList) =>
			{
			UpdateSelectedParterProperty();
			AutoApplyGrading();
			};
			}
			return _parterListCtrl;
			}

			//显示构件明细控件
			private void ShowParterListCtrl()
			{
			if (_hydroInfo == null)
			{
			return;
			}
			var allCalcuResultList = GetCalcuResultList();
			var parterListCtrl = GetParterListCtrl();
			parterListCtrl.SetBindingData(_hydroInfo, allCalcuResultList);
			if (allCalcuResultList == null \|\| allCalcuResultList.Count < 1)
			{
			parterListCtrl.SetNormalView();
			}
			else
			{
			parterListCtrl.SetCalcuView();
			}
			this.controlContainerBottom.Controls.Clear();
			this.controlContainerBottom.Controls.Add(parterListCtrl);
			this.docPnlBottom.Visibility = DevExpress.XtraBars.Docking.DockVisibility.Visible;
			this.docPnlBottom.Text = "构件明细";
			this.docPnlBottom.Height = 350;
			}

			//构件明细
			private void barBtnHydroParterList_ItemClick(object sender, DevExpress.XtraBars.ItemClickEventArgs e)
			{
			ShowParterListCtrl();
			}

			#endregion

			#region INP导出

			//导出水力INP文件
			private void barBtnHydroExportInp_ItemClick(object sender, DevExpress.XtraBars.ItemClickEventArgs e)
			{
			if (_hydroInfo == null)
			{
			return;
			}
			var fileName = Yw.WinFrmUI.FileDialogHelper.SaveInp("导出Inp文件");
			if (string.IsNullOrEmpty(fileName))
			{
			return;
			}
			var netWork = Yw.Hydro.ParseHelper.ToNetwork(_hydroInfo);
			var result = netWork.ToInpString();
			File.WriteAllText(fileName, result);
			TipFormHelper.ShowSucceed("导出成功");
			}

			#endregion INP导出

			#region 批量配置

			@@ -743,27 +551,27 @@
			//水箱
			this.barBtnSetWaterboxList.ItemClick += delegate
			{
			if (_hydroInfo == null)
			{
			return;
			}
			var dlg = new SetHydroWaterboxListDlg();
			dlg.SetBindingData(_hydroInfo);
			dlg.HydroClickEvent += async (obj) =>
			{
			if (obj == null)
			{
			return;
			}
			_selectedParter = obj;
			await _bimfaceCtrl?.ZoomAndSelectComponent(obj.Code);
			ShowProperty();
			};
			dlg.HydroChangedEvent += (obj) =>
			{
			//if (_hydroInfo == null)
			//{
			// return;
			//}
			//var dlg = new SetHydroWaterboxListDlg();
			//dlg.SetBindingData(_hydroInfo);
			//dlg.HydroClickEvent += async (obj) =>
			//{
			// if (obj == null)
			// {
			// return;
			// }
			// _selectedParter = obj;
			// await _bimfaceCtrl?.ZoomAndSelectComponent(obj.Code);
			// ShowProperty();
			//};
			//dlg.HydroChangedEvent += (obj) =>
			//{

			};
			dlg.ShowDialog();
			//};
			//dlg.ShowDialog();
			};
			//连接节点
			this.barBtnSetJunctionList.ItemClick += delegate
			@@ -774,52 +582,52 @@
			//闷头
			this.barBtnSetBluntheadList.ItemClick += delegate
			{
			if (_hydroInfo == null)
			{
			return;
			}
			var dlg = new SetHydroBluntheadListDlg();
			dlg.SetBindingData(_hydroInfo);
			dlg.HydroClickEvent += async (obj) =>
			{
			if (obj == null)
			{
			return;
			}
			_selectedParter = obj;
			await _bimfaceCtrl?.ZoomAndSelectComponent(obj.Code);
			ShowProperty();
			};
			dlg.HydroChangedEvent += (obj) =>
			{
			//if (_hydroInfo == null)
			//{
			// return;
			//}
			//var dlg = new SetHydroBluntheadListDlg();
			//dlg.SetBindingData(_hydroInfo);
			//dlg.HydroClickEvent += async (obj) =>
			//{
			// if (obj == null)
			// {
			// return;
			// }
			// _selectedParter = obj;
			// await _bimfaceCtrl?.ZoomAndSelectComponent(obj.Code);
			// ShowProperty();
			//};
			//dlg.HydroChangedEvent += (obj) =>
			//{

			};
			dlg.ShowDialog();
			//};
			//dlg.ShowDialog();
			};
			//弯头
			this.barBtnSetElbowsList.ItemClick += delegate
			{
			if (_hydroInfo == null)
			{
			return;
			}
			var dlg = new SetHydroElbowListDlg();
			dlg.SetBindingData(_hydroInfo);
			dlg.HydroClickEvent += async (obj) =>
			{
			if (obj == null)
			{
			return;
			}
			_selectedParter = obj;
			await _bimfaceCtrl?.ZoomAndSelectComponent(obj.Code);
			ShowProperty();
			};
			dlg.HydroChangedEvent += (obj) =>
			{
			//if (_hydroInfo == null)
			//{
			// return;
			//}
			//var dlg = new SetHydroElbowListDlg();
			//dlg.SetBindingData(_hydroInfo);
			//dlg.HydroClickEvent += async (obj) =>
			//{
			// if (obj == null)
			// {
			// return;
			// }
			// _selectedParter = obj;
			// await _bimfaceCtrl?.ZoomAndSelectComponent(obj.Code);
			// ShowProperty();
			//};
			//dlg.HydroChangedEvent += (obj) =>
			//{

			};
			dlg.ShowDialog();
			//};
			//dlg.ShowDialog();
			};
			//三通
			this.barBtnSetThreelinkList.ItemClick += delegate
			@@ -1205,7 +1013,7 @@
			pump.SpeedRatio = Math.Round(x.CurrentHz / pump.RatedHz, 1);
			}
			});
			ShowProperty();
			ShowSelectedProperty();
			return true;
			};
			dlg.ShowDialog();
			@@ -1213,397 +1021,74 @@

			#endregion

			#region 水力计算


			#region 前提条件

			//显示计算前提条件窗体
			private void ShowCalcuPrefixDlg()
			{
			if (_hydroInfo == null)
			{
			return;
			}
			var dlg = new HStation.WinFrmUI.SetHydroCalcuPrefixDlg1();
			dlg.SetBindingData(_hydroInfo);
			dlg.HydroViewEvent += async (parter) =>
			{
			_selectedParter = parter;
			if (_selectedParter != null)
			{
			await _bimfaceCtrl?.ZoomAndSelectComponents(new List<string>() { _selectedParter.Code });
			}
			ShowProperty();
			};
			dlg.HydroCalcuEvent += async () =>
			{
			if (_hydroInfo == null)
			{
			return;
			}

			//校验
			_checkResult = _hydroInfo.Check();
			if (!_checkResult.Succeed)
			{
			ShowCheckCtrl();
			TipFormHelper.ShowWarn("校验失败，请检查后重试");
			return;
			}

			WaitFormHelper.ShowWaitForm(this, "正在计算分析中，请稍候...");

			//await Task.Delay(5000);

			var netWork = Yw.Hydro.ParseHelper.ToNetwork(_hydroInfo);
			_calcuResult = netWork.Calcu();

			WaitFormHelper.HideWaitForm();
			if (_calcuResult.Succeed)
			{
			GetCalcuResultList(false);
			await _bimfaceCtrl?.SetLogicCalcuCustomLabels(_calcuResult);
			TipFormHelper.ShowSucceed("计算成功！");
			}
			else
			{
			ShowCalcuFailedCtrl();
			TipFormHelper.ShowError("计算失败！");
			}

			};
			dlg.ShowDialog();
			}

			//显示工况计算窗体
			private void ShowWorkingCalcuDlg()
			{
			var dlg = new SetHydroWorkingInfoDlg();
			dlg.HydroViewEvent += async (parter) =>
			{
			_selectedParter = parter;
			if (_selectedParter != null)
			{
			await _bimfaceCtrl?.ZoomAndSelectComponents(new List<string>() { _selectedParter.Code });
			}
			ShowProperty();
			};
			dlg.HydroCalcuEvent += async (hydroInfo, workingInfo) =>
			{
			if (_hydroInfo == null)
			{
			return;
			}
			_hydroInfo.UpdateWorkingInfo(workingInfo);
			//校验
			_checkResult = _hydroInfo.Check();
			if (!_checkResult.Succeed)
			{
			ShowCheckCtrl();
			TipFormHelper.ShowWarn("校验失败，请检查后重试");
			return;
			}

			WaitFormHelper.ShowWaitForm(this, "正在计算分析中，请稍候...");


			await Task.Delay(5000);

			var netWork = Yw.Hydro.ParseHelper.ToNetwork(_hydroInfo);
			_calcuResult = netWork.Calcu();

			WaitFormHelper.HideWaitForm();
			if (_calcuResult.Succeed)
			{
			GetCalcuResultList(false);
			await _bimfaceCtrl?.SetLogicCalcuCustomLabels(_calcuResult);
			TipFormHelper.ShowSucceed("计算成功！");
			}
			else
			{
			ShowCalcuFailedCtrl();
			TipFormHelper.ShowError("计算失败！");
			}
			AutoApplyGrading();
			UpdateParterListProperty();
			ShowProperty();
			};
			dlg.SetBindingData(_hydroInfo);
			dlg.ShowDialog();
			}

			#endregion

			#region 计算失败

			//计算失败控件
			private HydroCalcuFailedCtrl _calcuFailedCtrl = null;

			//获取计算失败控件
			private HydroCalcuFailedCtrl GetCalcuFailedCtrl()
			{
			if (_calcuFailedCtrl == null)
			{
			_calcuFailedCtrl = new HydroCalcuFailedCtrl();
			_calcuFailedCtrl.Dock = DockStyle.Fill;
			}
			return _calcuFailedCtrl;
			}

			//显示计算失败控件
			private void ShowCalcuFailedCtrl()
			{
			if (_hydroInfo == null)
			{
			return;
			}
			if (_calcuResult == null)
			{
			return;
			}
			if (_calcuResult.Succeed)
			{
			return;
			}
			var calcuFailedCtrl = GetCalcuFailedCtrl();
			calcuFailedCtrl.SetBindingData(_calcuResult.FailedList);
			this.controlContainerBottom.Controls.Clear();
			this.controlContainerBottom.Controls.Add(calcuFailedCtrl);
			this.docPnlBottom.Visibility = DevExpress.XtraBars.Docking.DockVisibility.Visible;
			this.docPnlBottom.Text = "计算失败原因";
			this.docPnlBottom.Height = 350;
			}

			#endregion

			#region 计算结果

			//所有计算结果列表
			private List<HydroCalcuResult> _allCalcuResultList = null;

			//获取计算结果
			//true 使用缓存，false 不使用缓存
			private List<HydroCalcuResult> GetCalcuResultList(bool isCache = true)
			{
			if (_hydroInfo == null)
			{
			return default;
			}
			if (_calcuResult == null)
			{
			return default;
			}
			if (!_calcuResult.Succeed)
			{
			return default;
			}
			if (isCache)
			{
			return _allCalcuResultList;
			}

			_allCalcuResultList = new List<HydroCalcuResult>();

			//节点
			var allNodeList = _hydroInfo.GetAllNodes();
			if (allNodeList != null && allNodeList.Count > 0)
			{
			foreach (var node in allNodeList)
			{
			var calcuNode = _calcuResult.NodeList?.Find(x => x.Id == node.Code);
			if (calcuNode != null)
			{
			var calcuResult = new HydroCalcuNodeResult()
			{
			Code = node.Code,
			CalcuPress = calcuNode.Press,
			CalcuHead = calcuNode.Head,
			CalcuDemand = calcuNode.Demand
			};
			_allCalcuResultList.Add(calcuResult);
			}
			}
			}

			//管段
			var allLinkList = _hydroInfo.GetAllLinks();
			if (allLinkList != null && allLinkList.Count > 0)
			{
			foreach (var link in allLinkList)
			{
			var calcuLink = _calcuResult.LinkList?.Find(x => x.Id == link.Code);
			if (calcuLink != null)
			{
			var calcuResult = new HydroCalcuLinkResult()
			{
			Code = link.Code,
			CalcuFlow = calcuLink.Flow,
			CalcuVelocity = calcuLink.Velocity,
			CalcuHeadLoss = calcuLink.Headloss
			};
			_allCalcuResultList.Add(calcuResult);
			}
			}
			}

			//流量计
			var allFlowmeterList = _hydroInfo.Flowmeters;
			if (allFlowmeterList != null && allFlowmeterList.Count > 0)
			{
			foreach (var flowmeter in allFlowmeterList)
			{
			var calcuFlowmeterResult = _allCalcuResultList.Find(x => x.Code == flowmeter.Code) as HydroCalcuNodeResult;
			if (calcuFlowmeterResult != null)
			{
			var calcuFlowmeterNewResult = new HydroCalcuFlowmeterResult(calcuFlowmeterResult);
			var calcuFlowmeterLinkResultList = new List<HydroCalcuLinkResult>();
			var flowmeterLinkList = allLinkList?.Where(x => x.StartCode == flowmeter.Code \|\| x.EndCode == flowmeter.Code).ToList();
			if (flowmeterLinkList != null && flowmeterLinkList.Count > 0)
			{
			foreach (var flowmeterLink in flowmeterLinkList)
			{
			var calcuFlowmeterLinkResult = _allCalcuResultList.Find(x => x.Code == flowmeterLink.Code) as HydroCalcuLinkResult;
			if (calcuFlowmeterLinkResult != null)
			{
			calcuFlowmeterLinkResultList.Add(calcuFlowmeterLinkResult);
			}
			}
			}
			if (calcuFlowmeterLinkResultList.Exists(x => x.CalcuFlow.HasValue))
			{
			calcuFlowmeterNewResult.CalcuQ = calcuFlowmeterLinkResultList.Where(x => x.CalcuFlow.HasValue).Average(x => x.CalcuFlow.Value);
			}
			_allCalcuResultList.Remove(calcuFlowmeterResult);
			_allCalcuResultList.Add(calcuFlowmeterNewResult);
			}
			}
			}

			//压力表
			var allPressmeterList = _hydroInfo.Pressmeters;
			if (allPressmeterList != null && allPressmeterList.Count > 0)
			{
			foreach (var pressmeter in allPressmeterList)
			{
			var calcuPressmeterResult = _allCalcuResultList.Find(x => x.Code == pressmeter.Code) as HydroCalcuNodeResult;
			if (calcuPressmeterResult != null)
			{
			var calcuPressmeterNewResult = new HydroCalcuPressmeterResult(calcuPressmeterResult);
			calcuPressmeterNewResult.CalcuPr = calcuPressmeterResult.CalcuPress;
			_allCalcuResultList.Remove(calcuPressmeterResult);
			_allCalcuResultList.Add(calcuPressmeterNewResult);
			}
			}
			}

			//水泵
			var allPumpList = _hydroInfo.Pumps;
			if (allPumpList != null && allPumpList.Count > 0)
			{
			foreach (var pump in allPumpList)
			{
			var calcuPumpResult = _allCalcuResultList.Find(x => x.Code == pump.Code) as HydroCalcuLinkResult;
			if (calcuPumpResult != null)
			{
			var calcuPumpNewResult = new HydroCalcuPumpResult(calcuPumpResult);
			calcuPumpNewResult.CalcuQ = calcuPumpResult.CalcuFlow;
			if (calcuPumpNewResult.CalcuQ.HasValue)
			{
			var calcuNodeStartResult = _allCalcuResultList.Find(x => x.Code == pump.StartCode) as HydroCalcuNodeResult;
			var calcuNodeEndResult = _allCalcuResultList.Find(x => x.Code == pump.EndCode) as HydroCalcuNodeResult;
			if (calcuNodeStartResult != null && calcuNodeEndResult != null)
			{
			if (calcuNodeStartResult.CalcuPress.HasValue && calcuNodeEndResult.CalcuPress.HasValue)
			{
			calcuPumpNewResult.CalcuH = Math.Abs(calcuNodeStartResult.CalcuPress.Value - calcuNodeEndResult.CalcuPress.Value);
			}
			if (pump.LinkStatus == Yw.Hydro.PumpStatus.Open && pump.RatedN.HasValue)
			{
			var curveqp = _hydroInfo.Curves?.Find(x => x.Code == pump.CurveQP);
			if (curveqp != null)
			{
			if (curveqp.CurveData != null && curveqp.CurveData.Count > 3)
			{
			var point2dList = curveqp.CurveData.Select(x => new Yw.Geometry.Point2d(x.X, x.Y)).ToList();
			var point2dSimularList = point2dList.GetQPPointListByN(pump.RatedN.Value, pump.RatedN.Value * pump.SpeedRatio);
			var pumpCurveQp = new Yw.Pump.CurveQP(eFeatType.Cubic, point2dSimularList);
			calcuPumpNewResult.CalcuP = pumpCurveQp.FeatCurve.GetPointY(calcuPumpNewResult.CalcuQ.Value);
			}
			}
			}
			if (calcuPumpNewResult.CalcuH.HasValue && calcuPumpNewResult.CalcuP.HasValue)
			{
			calcuPumpNewResult.CalcuE = Yw.Pump.CalculationHelper.CalcuE(calcuPumpNewResult.CalcuQ.Value, calcuPumpNewResult.CalcuH.Value, calcuPumpNewResult.CalcuP.Value);
			}
			}
			}
			_allCalcuResultList.Remove(calcuPumpResult);
			_allCalcuResultList.Add(calcuPumpNewResult);
			}
			}
			}

			return _allCalcuResultList;
			}

			#endregion

			//水力计算
			private void barBtnHydroCalcu_ItemClick(object sender, DevExpress.XtraBars.ItemClickEventArgs e)
			{
			//ShowCalcuPrefixDlg();
			ShowWorkingCalcuDlg();
			}

			#endregion

			#region 构件查询

			//查询组件
			private XhsProjectSimulationSearchCtrl _searchCtrl = null;
			private HydroVisualSearchListCtrl _searchCtrl = null;

			//获取查询组件
			private XhsProjectSimulationSearchCtrl GetSearchCtrl()
			private HydroVisualSearchListCtrl GetSearchCtrl()
			{
			if (_searchCtrl == null)
			{
			_searchCtrl = new XhsProjectSimulationSearchCtrl();
			_searchCtrl = new HydroVisualSearchListCtrl();
			_searchCtrl.Dock = DockStyle.Fill;
			_searchCtrl.InitialData(() => _hydroInfo);
			_searchCtrl.ApplySearchEvent += async (list) =>
			var allVisualViewModelList = GetVisualViewModelList();
			_searchCtrl.InitialData(allVisualViewModelList);
			_searchCtrl.HydroClickInfoEvent += async (visual) =>
			{
			if (_hydroInfo == null)
			{
			return;
			}
			ShowSelectedProperty(visual);
			await _bimfaceCtrl?.ZoomAndSelectComponent(visual?.Code);
			};
			_searchCtrl.HydroSearchInfoEvent += async (list) =>
			{
			var elementIds = new List<string>();
			if (list != null && list.Count > 0)
			{
			var first = list.First();
			var allParterList = _hydroInfo.GetAllParters();
			_selectedParter = allParterList?.Find(x => x.Code == first.Code);
			_selectedVisual = list.First();
			list.ForEach(x => elementIds.Add(x.Code));
			}
			else
			{
			_selectedParter = null;
			_selectedVisual = null;
			}
			ShowSelectedProperty();
			await _bimfaceCtrl?.ZoomAndSelectComponents(elementIds);
			ShowProperty();
			};
			}
			return _searchCtrl;
			}

			//显示查询控件
			private void ShowSearchCtrl()
			//查询控件是否可见
			private bool IsSearchCtrlVisible
			{
			if (_hydroInfo == null)
			get
			{
			if (this.docPnlBottom.Visibility == DevExpress.XtraBars.Docking.DockVisibility.Visible)
			{
			if (this.controlContainerBottom.Controls.Count > 0)
			{
			if (this.controlContainerBottom.Controls[0] is HydroVisualSearchListCtrl)
			{
			return true;
			}
			}
			}
			return false;
			}
			}

			//显示查询控件
			private void ShowSearchCtrl(string content)
			{
			if (IsSearchCtrlVisible)
			{
			return;
			}
			var searchCtrl = GetSearchCtrl();
			searchCtrl.SetBindingData(content);
			this.controlContainerBottom.Controls.Clear();
			this.controlContainerBottom.Controls.Add(searchCtrl);
			this.docPnlBottom.Visibility = DevExpress.XtraBars.Docking.DockVisibility.Visible;
			@@ -1611,10 +1096,30 @@
			this.docPnlBottom.Height = 350;
			}

			//显示查询窗体
			private void ShowSearchDlg()
			{
			if (IsSearchCtrlVisible)
			{
			return;
			}
			var dlg = new InputHydroVisualSearchListDlg();
			dlg.SearchEvent += (content) =>
			{
			if (string.IsNullOrEmpty(content))
			{
			return;
			}
			ShowSearchCtrl(content);
			};
			dlg.SetBindingData();
			dlg.ShowDialog();
			}

			//查询
			private void barBtnSearch_ItemClick(object sender, DevExpress.XtraBars.ItemClickEventArgs e)
			{
			ShowSearchCtrl();
			ShowSearchDlg();
			}

			#endregion
			@@ -1635,7 +1140,7 @@
			_allMarkSetList.Add(new HydroMarkSetViewModel()
			{
			Code = Yw.Hydro.ParterCatalog.Waterbox,
			Name = Yw.WinFrmUI.HydroParterCatalogHelper.GetCatalogName(Yw.Hydro.ParterCatalog.Waterbox),
			Name = Yw.WinFrmUI.HydroParterCatalogHelper.GetName(Yw.Hydro.ParterCatalog.Waterbox),
			MarkType = (int)eWaterboxMarkType.None
			});
			}
			@@ -1644,7 +1149,7 @@
			_allMarkSetList.Add(new HydroMarkSetViewModel()
			{
			Code = Yw.Hydro.ParterCatalog.Pump,
			Name = Yw.WinFrmUI.HydroParterCatalogHelper.GetCatalogName(Yw.Hydro.ParterCatalog.Pump),
			Name = Yw.WinFrmUI.HydroParterCatalogHelper.GetName(Yw.Hydro.ParterCatalog.Pump),
			MarkType = (int)eWaterboxMarkType.None
			});
			}
			@@ -1653,7 +1158,7 @@
			_allMarkSetList.Add(new HydroMarkSetViewModel()
			{
			Code = Yw.Hydro.ParterCatalog.Valve,
			Name = Yw.WinFrmUI.HydroParterCatalogHelper.GetCatalogName(Yw.Hydro.ParterCatalog.Valve),
			Name = Yw.WinFrmUI.HydroParterCatalogHelper.GetName(Yw.Hydro.ParterCatalog.Valve),
			MarkType = (int)eWaterboxMarkType.None
			});
			}
			@@ -1662,7 +1167,7 @@
			_allMarkSetList.Add(new HydroMarkSetViewModel()
			{
			Code = Yw.Hydro.ParterCatalog.Pipe,
			Name = Yw.WinFrmUI.HydroParterCatalogHelper.GetCatalogName(Yw.Hydro.ParterCatalog.Pipe),
			Name = Yw.WinFrmUI.HydroParterCatalogHelper.GetName(Yw.Hydro.ParterCatalog.Pipe),
			MarkType = (int)eWaterboxMarkType.None
			});
			}
			@@ -1671,7 +1176,7 @@
			_allMarkSetList.Add(new HydroMarkSetViewModel()
			{
			Code = Yw.Hydro.ParterCatalog.Nozzle,
			Name = Yw.WinFrmUI.HydroParterCatalogHelper.GetCatalogName(Yw.Hydro.ParterCatalog.Nozzle),
			Name = Yw.WinFrmUI.HydroParterCatalogHelper.GetName(Yw.Hydro.ParterCatalog.Nozzle),
			MarkType = (int)eWaterboxMarkType.None
			});
			}
			@@ -2148,6 +1653,17 @@
			await ClearMarkResultList();
			}


			#region 标注显示

			//是否显示
			private void barCkMark_CheckedChanged(object sender, DevExpress.XtraBars.ItemClickEventArgs e)
			{

			}

			#endregion

			#endregion

			#region 颜色分级
			@@ -2240,7 +1756,7 @@
			_allGradingApplyList.Add(new HydroGradingApplyViewModel()
			{
			Code = Yw.Hydro.ParterCatalog.Pump,
			Name = Yw.WinFrmUI.HydroParterCatalogHelper.GetCatalogName(Yw.Hydro.ParterCatalog.Pump),
			Name = Yw.WinFrmUI.HydroParterCatalogHelper.GetName(Yw.Hydro.ParterCatalog.Pump),
			PropName = Yw.Hydro.ParterProp.LinkStatus
			});
			}
			@@ -2249,7 +1765,7 @@
			_allGradingApplyList.Add(new HydroGradingApplyViewModel()
			{
			Code = Yw.Hydro.ParterCatalog.Valve,
			Name = Yw.WinFrmUI.HydroParterCatalogHelper.GetCatalogName(Yw.Hydro.ParterCatalog.Valve),
			Name = Yw.WinFrmUI.HydroParterCatalogHelper.GetName(Yw.Hydro.ParterCatalog.Valve),
			PropName = Yw.Hydro.ParterProp.LinkStatus
			});
			}
			@@ -2258,8 +1774,8 @@
			_allGradingApplyList.Add(new HydroGradingApplyViewModel()
			{
			Code = Yw.Hydro.ParterCatalog.Pipe,
			Name = Yw.WinFrmUI.HydroParterCatalogHelper.GetCatalogName(Yw.Hydro.ParterCatalog.Pipe),
			PropName = Yw.Hydro.ParterProp.CalcuFlow
			Name = Yw.WinFrmUI.HydroParterCatalogHelper.GetName(Yw.Hydro.ParterCatalog.Pipe),
			PropName = HydroVisualCalcuProp.CalcuFlow
			});
			}
			}
			@@ -2326,9 +1842,9 @@
			}
			}
			break;
			case Yw.Hydro.ParterProp.CalcuFlow:
			case HydroVisualCalcuProp.CalcuFlow:
			{
			var gradingList = allCatalogGradingList.Where(x => x.PropName == Yw.Hydro.ParterProp.CalcuFlow).OrderBy(t => t.SortCode).ToList();
			var gradingList = allCatalogGradingList.Where(x => x.PropName == HydroVisualCalcuProp.CalcuFlow).OrderBy(t => t.SortCode).ToList();
			if (gradingList != null && gradingList.Count > 0)
			{
			var calcuResult = allCalcuResultList?.Find(t => t.Code == pump.Code);
			@@ -2351,9 +1867,9 @@
			}
			}
			break;
			case Yw.Hydro.ParterProp.CalcuVelocity:
			case HydroVisualCalcuProp.CalcuVelocity:
			{
			var gradingList = allCatalogGradingList.Where(x => x.PropName == Yw.Hydro.ParterProp.CalcuVelocity).OrderBy(t => t.SortCode).ToList();
			var gradingList = allCatalogGradingList.Where(x => x.PropName == HydroVisualCalcuProp.CalcuVelocity).OrderBy(t => t.SortCode).ToList();
			if (gradingList != null && gradingList.Count > 0)
			{
			var calcuResult = allCalcuResultList?.Find(t => t.Code == pump.Code);
			@@ -2376,9 +1892,9 @@
			}
			}
			break;
			case Yw.Hydro.ParterProp.CalcuHeadLoss:
			case HydroVisualCalcuProp.CalcuHeadLoss:
			{
			var gradingList = allCatalogGradingList.Where(x => x.PropName == Yw.Hydro.ParterProp.CalcuHeadLoss).OrderBy(t => t.SortCode).ToList();
			var gradingList = allCatalogGradingList.Where(x => x.PropName == HydroVisualCalcuProp.CalcuHeadLoss).OrderBy(t => t.SortCode).ToList();
			if (gradingList != null && gradingList.Count > 0)
			{
			var calcuResult = allCalcuResultList?.Find(t => t.Code == pump.Code);
			@@ -2433,9 +1949,9 @@
			}
			}
			break;
			case Yw.Hydro.ParterProp.CalcuFlow:
			case HydroVisualCalcuProp.CalcuFlow:
			{
			var gradingList = allCatalogGradingList.Where(x => x.PropName == Yw.Hydro.ParterProp.CalcuFlow).OrderBy(t => t.SortCode).ToList();
			var gradingList = allCatalogGradingList.Where(x => x.PropName == HydroVisualCalcuProp.CalcuFlow).OrderBy(t => t.SortCode).ToList();
			if (gradingList != null && gradingList.Count > 0)
			{
			var calcuResult = allCalcuResultList?.Find(t => t.Code == valve.Code);
			@@ -2458,9 +1974,9 @@
			}
			}
			break;
			case Yw.Hydro.ParterProp.CalcuVelocity:
			case HydroVisualCalcuProp.CalcuVelocity:
			{
			var gradingList = allCatalogGradingList.Where(x => x.PropName == Yw.Hydro.ParterProp.CalcuVelocity).OrderBy(t => t.SortCode).ToList();
			var gradingList = allCatalogGradingList.Where(x => x.PropName == HydroVisualCalcuProp.CalcuVelocity).OrderBy(t => t.SortCode).ToList();
			if (gradingList != null && gradingList.Count > 0)
			{
			var calcuResult = allCalcuResultList?.Find(t => t.Code == valve.Code);
			@@ -2483,9 +1999,9 @@
			}
			}
			break;
			case Yw.Hydro.ParterProp.CalcuHeadLoss:
			case HydroVisualCalcuProp.CalcuHeadLoss:
			{
			var gradingList = allCatalogGradingList.Where(x => x.PropName == Yw.Hydro.ParterProp.CalcuHeadLoss).OrderBy(t => t.SortCode).ToList();
			var gradingList = allCatalogGradingList.Where(x => x.PropName == HydroVisualCalcuProp.CalcuHeadLoss).OrderBy(t => t.SortCode).ToList();
			if (gradingList != null && gradingList.Count > 0)
			{
			var calcuResult = allCalcuResultList?.Find(t => t.Code == valve.Code);
			@@ -2522,9 +2038,9 @@
			{
			switch (x.PropName)
			{
			case Yw.Hydro.ParterProp.CalcuFlow:
			case HydroVisualCalcuProp.CalcuFlow:
			{
			var gradingList = allCatalogGradingList.Where(x => x.PropName == Yw.Hydro.ParterProp.CalcuFlow).OrderBy(t => t.SortCode).ToList();
			var gradingList = allCatalogGradingList.Where(x => x.PropName == HydroVisualCalcuProp.CalcuFlow).OrderBy(t => t.SortCode).ToList();
			if (gradingList != null && gradingList.Count > 0)
			{
			var calcuResult = allCalcuResultList?.Find(t => t.Code == pipe.Code);
			@@ -2547,9 +2063,9 @@
			}
			}
			break;
			case Yw.Hydro.ParterProp.CalcuVelocity:
			case HydroVisualCalcuProp.CalcuVelocity:
			{
			var gradingList = allCatalogGradingList.Where(x => x.PropName == Yw.Hydro.ParterProp.CalcuVelocity).OrderBy(t => t.SortCode).ToList();
			var gradingList = allCatalogGradingList.Where(x => x.PropName == HydroVisualCalcuProp.CalcuVelocity).OrderBy(t => t.SortCode).ToList();
			if (gradingList != null && gradingList.Count > 0)
			{
			var calcuResult = allCalcuResultList?.Find(t => t.Code == pipe.Code);
			@@ -2572,9 +2088,9 @@
			}
			}
			break;
			case Yw.Hydro.ParterProp.CalcuHeadLoss:
			case HydroVisualCalcuProp.CalcuHeadLoss:
			{
			var gradingList = allCatalogGradingList.Where(x => x.PropName == Yw.Hydro.ParterProp.CalcuHeadLoss).OrderBy(t => t.SortCode).ToList();
			var gradingList = allCatalogGradingList.Where(x => x.PropName == HydroVisualCalcuProp.CalcuHeadLoss).OrderBy(t => t.SortCode).ToList();
			if (gradingList != null && gradingList.Count > 0)
			{
			var calcuResult = allCalcuResultList?.Find(t => t.Code == pipe.Code);
			@@ -2680,9 +2196,9 @@
			}
			}
			break;
			case Yw.Hydro.ParterProp.CalcuFlow:
			case HydroVisualCalcuProp.CalcuFlow:
			{
			var gradingList = currentGradingList.Where(x => x.PropName == Yw.Hydro.ParterProp.CalcuFlow).OrderBy(t => t.SortCode).ToList();
			var gradingList = currentGradingList.Where(x => x.PropName == HydroVisualCalcuProp.CalcuFlow).OrderBy(t => t.SortCode).ToList();
			if (gradingList != null && gradingList.Count > 0)
			{
			var calcuResult = allCalcuResultList?.Find(t => t.Code == pump.Code);
			@@ -2705,9 +2221,9 @@
			}
			}
			break;
			case Yw.Hydro.ParterProp.CalcuVelocity:
			case HydroVisualCalcuProp.CalcuVelocity:
			{
			var gradingList = currentGradingList.Where(x => x.PropName == Yw.Hydro.ParterProp.CalcuVelocity).OrderBy(t => t.SortCode).ToList();
			var gradingList = currentGradingList.Where(x => x.PropName == HydroVisualCalcuProp.CalcuVelocity).OrderBy(t => t.SortCode).ToList();
			if (gradingList != null && gradingList.Count > 0)
			{
			var calcuResult = allCalcuResultList?.Find(t => t.Code == pump.Code);
			@@ -2730,9 +2246,9 @@
			}
			}
			break;
			case Yw.Hydro.ParterProp.CalcuHeadLoss:
			case HydroVisualCalcuProp.CalcuHeadLoss:
			{
			var gradingList = currentGradingList.Where(x => x.PropName == Yw.Hydro.ParterProp.CalcuHeadLoss).OrderBy(t => t.SortCode).ToList();
			var gradingList = currentGradingList.Where(x => x.PropName == HydroVisualCalcuProp.CalcuHeadLoss).OrderBy(t => t.SortCode).ToList();
			if (gradingList != null && gradingList.Count > 0)
			{
			var calcuResult = allCalcuResultList?.Find(t => t.Code == pump.Code);
			@@ -2787,9 +2303,9 @@
			}
			}
			break;
			case Yw.Hydro.ParterProp.CalcuFlow:
			case HydroVisualCalcuProp.CalcuFlow:
			{
			var gradingList = currentGradingList.Where(x => x.PropName == Yw.Hydro.ParterProp.CalcuFlow).OrderBy(t => t.SortCode).ToList();
			var gradingList = currentGradingList.Where(x => x.PropName == HydroVisualCalcuProp.CalcuFlow).OrderBy(t => t.SortCode).ToList();
			if (gradingList != null && gradingList.Count > 0)
			{
			var calcuResult = allCalcuResultList?.Find(t => t.Code == valve.Code);
			@@ -2812,9 +2328,9 @@
			}
			}
			break;
			case Yw.Hydro.ParterProp.CalcuVelocity:
			case HydroVisualCalcuProp.CalcuVelocity:
			{
			var gradingList = currentGradingList.Where(x => x.PropName == Yw.Hydro.ParterProp.CalcuVelocity).OrderBy(t => t.SortCode).ToList();
			var gradingList = currentGradingList.Where(x => x.PropName == HydroVisualCalcuProp.CalcuVelocity).OrderBy(t => t.SortCode).ToList();
			if (gradingList != null && gradingList.Count > 0)
			{
			var calcuResult = allCalcuResultList?.Find(t => t.Code == valve.Code);
			@@ -2837,9 +2353,9 @@
			}
			}
			break;
			case Yw.Hydro.ParterProp.CalcuHeadLoss:
			case HydroVisualCalcuProp.CalcuHeadLoss:
			{
			var gradingList = currentGradingList.Where(x => x.PropName == Yw.Hydro.ParterProp.CalcuHeadLoss).OrderBy(t => t.SortCode).ToList();
			var gradingList = currentGradingList.Where(x => x.PropName == HydroVisualCalcuProp.CalcuHeadLoss).OrderBy(t => t.SortCode).ToList();
			if (gradingList != null && gradingList.Count > 0)
			{
			var calcuResult = allCalcuResultList?.Find(t => t.Code == valve.Code);
			@@ -2876,9 +2392,9 @@
			{
			switch (propName)
			{
			case Yw.Hydro.ParterProp.CalcuFlow:
			case HydroVisualCalcuProp.CalcuFlow:
			{
			var gradingList = currentGradingList.Where(x => x.PropName == Yw.Hydro.ParterProp.CalcuFlow).OrderBy(t => t.SortCode).ToList();
			var gradingList = currentGradingList.Where(x => x.PropName == HydroVisualCalcuProp.CalcuFlow).OrderBy(t => t.SortCode).ToList();
			if (gradingList != null && gradingList.Count > 0)
			{
			var calcuResult = allCalcuResultList?.Find(t => t.Code == pipe.Code);
			@@ -2901,9 +2417,9 @@
			}
			}
			break;
			case Yw.Hydro.ParterProp.CalcuVelocity:
			case HydroVisualCalcuProp.CalcuVelocity:
			{
			var gradingList = currentGradingList.Where(x => x.PropName == Yw.Hydro.ParterProp.CalcuVelocity).OrderBy(t => t.SortCode).ToList();
			var gradingList = currentGradingList.Where(x => x.PropName == HydroVisualCalcuProp.CalcuVelocity).OrderBy(t => t.SortCode).ToList();
			if (gradingList != null && gradingList.Count > 0)
			{
			var calcuResult = allCalcuResultList?.Find(t => t.Code == pipe.Code);
			@@ -2926,9 +2442,9 @@
			}
			}
			break;
			case Yw.Hydro.ParterProp.CalcuHeadLoss:
			case HydroVisualCalcuProp.CalcuHeadLoss:
			{
			var gradingList = currentGradingList.Where(x => x.PropName == Yw.Hydro.ParterProp.CalcuHeadLoss).OrderBy(t => t.SortCode).ToList();
			var gradingList = currentGradingList.Where(x => x.PropName == HydroVisualCalcuProp.CalcuHeadLoss).OrderBy(t => t.SortCode).ToList();
			if (gradingList != null && gradingList.Count > 0)
			{
			var calcuResult = allCalcuResultList?.Find(t => t.Code == pipe.Code);
			@@ -3102,9 +2618,9 @@
			sw.Stop();
			TimeSpan ts2 = sw.Elapsed;
			Console.WriteLine("Stopwatch总共花费{0}ms.", ts2.TotalMilliseconds);
			_selectedParter = null;
			_selectedVisual = null;
			await _bimfaceCtrl?.ZoomAndSelectComponents(null);
			ShowProperty();
			ShowSelectedProperty();
			TipFormHelper.ShowSucceed("数据已刷新");
			}
			}
			@@ -3113,30 +2629,1166 @@

			#region 水流动画

			//加载流向
			private async void barBtnLoadFlowDirection_ItemClick(object sender, DevExpress.XtraBars.ItemClickEventArgs e)
			//所有流向列表
			private List<LogicFlowEffect> _allFlowEffectList = null;

			//获取流向列表
			private List<LogicFlowEffect> GetFlowEffectList()
			{
			var pipes = _hydroInfo.Pipes;
			var list = pipes.Select(x =>
			if (_hydroInfo == null)
			{
			return new Yw.WinFrmUI.Bimface.LogicFlowEffect()
			return default;
			}
			if (_allFlowEffectList == null)
			{
			_allFlowEffectList = new List<LogicFlowEffect>();
			var allCalcuResultList = GetCalcuResultList();
			if (_hydroInfo.Pipes != null && _hydroInfo.Pipes.Count > 0)
			{
			Id = x.Code,
			Rotation = 90,
			Speed = 0.1d
			};
			}).ToList();
			await _bimfaceCtrl?.LoadFlowEffect(list);
			foreach (var parter in _hydroInfo.Pipes)
			{
			var flowEffect = new LogicFlowEffect();
			_allFlowEffectList.Add(flowEffect);
			flowEffect.Id = parter.Code;
			flowEffect.Rotation = 90;
			flowEffect.SpeedX = 0.1;
			if (parter.FlowDirectionX == Yw.Hydro.FlowDirection.None)
			{
			flowEffect.SpeedX = 0;
			}
			else if (parter.FlowDirectionX == Yw.Hydro.FlowDirection.Positive)
			{
			flowEffect.SpeedX = 0.1;
			}
			else
			{
			flowEffect.SpeedX = -0.1;
			}

			if (parter.FlowDirectionY == Yw.Hydro.FlowDirection.None)
			{
			flowEffect.SpeedY = 0;
			}
			else if (parter.FlowDirectionY == Yw.Hydro.FlowDirection.Positive)
			{
			flowEffect.SpeedY = 0.1;
			}
			else
			{
			flowEffect.SpeedY = -0.1;
			}

			var calcuResult = allCalcuResultList?.Find(x => x.Code == parter.Code) as HydroCalcuLinkResult;
			if (calcuResult != null)
			{
			if (calcuResult.CalcuVelocity < 0)
			{
			flowEffect.SpeedX = -flowEffect.SpeedX;
			}
			}
			}
			}
			}
			return _allFlowEffectList;
			}

			/// <summary>
			/// 加载水流动画
			/// </summary>
			private async void LoadFlowEffect()
			{
			if (_allFlowEffectList != null)
			{
			return;
			}
			var allFlowEffectList = GetFlowEffectList();
			await _bimfaceCtrl?.LoadFlowEffect(allFlowEffectList);
			}

			//卸载流向
			private async void barBtnUnloadFlowDirection_ItemClick(object sender, DevExpress.XtraBars.ItemClickEventArgs e)
			private async void UnloadFlowEffect()
			{
			if (_allFlowEffectList == null)
			{
			return;
			}
			_allFlowEffectList = null;
			await _bimfaceCtrl?.UnloadFlowEffect();
			}

			//更新水流动画
			private async void UpdateFlowEffect(Yw.Model.HydroParterInfo parter)
			{
			if (_allFlowEffectList == null)
			{
			return;
			}
			var visual = parter as Yw.Model.HydroVisualInfo;
			if (visual == null)
			{
			return;
			}
			var flowEffect = _allFlowEffectList.Find(x => x.Id == parter.Code);
			if (flowEffect == null)
			{
			return;
			}
			if (visual.FlowDirectionX == Yw.Hydro.FlowDirection.None)
			{
			flowEffect.SpeedX = 0;
			}
			else if (visual.FlowDirectionX == Yw.Hydro.FlowDirection.Positive)
			{
			flowEffect.SpeedX = 0.1;
			}
			else
			{
			flowEffect.SpeedX = -0.1;
			}

			if (visual.FlowDirectionY == Yw.Hydro.FlowDirection.None)
			{
			flowEffect.SpeedY = 0;
			}
			else if (visual.FlowDirectionY == Yw.Hydro.FlowDirection.Positive)
			{
			flowEffect.SpeedY = 0.1;
			}
			else
			{
			flowEffect.SpeedY = -0.1;
			}

			var allCalcuResultList = GetCalcuResultList();
			var calcuResult = allCalcuResultList?.Find(x => x.Code == visual.Code) as HydroCalcuLinkResult;
			if (calcuResult != null)
			{
			if (calcuResult.CalcuVelocity < 0)
			{
			flowEffect.SpeedX = -flowEffect.SpeedX;
			}
			}
			await _bimfaceCtrl?.UpdateFlowEffect(flowEffect);
			}

			//加载流向
			private void barBtnLoadFlowDirection_ItemClick(object sender, DevExpress.XtraBars.ItemClickEventArgs e)
			{
			LoadFlowEffect();
			}

			//卸载流向
			private void barBtnUnloadFlowDirection_ItemClick(object sender, DevExpress.XtraBars.ItemClickEventArgs e)
			{
			UnloadFlowEffect();
			}

			private void barCkFlowEffect_CheckedChanged(object sender, DevExpress.XtraBars.ItemClickEventArgs e)
			{

			}

			#endregion

			#region 选择构件

			//选择构件
			private Yw.Model.HydroVisualInfo _selectedVisual = null;

			//选择构件
			private Yw.Model.HydroVisualInfo SelectedVisual
			{
			get { return _selectedVisual; }
			set
			{
			_selectedVisual = value;
			if (_selectedVisual == null)
			{
			this.barBtnSetMonitor.Enabled = false;
			}
			else
			{
			this.barBtnSetMonitor.Enabled = true;
			}
			}
			}

			#endregion

			#region 构件明细

			#region 构件列表

			//所有构件视图列表
			private List<HydroVisualViewModel> _allVisualViewModelList = null;

			//获取构件视图列表
			private List<HydroVisualViewModel> GetVisualViewModelList()
			{
			if (_hydroInfo == null)
			{
			return default;
			}
			if (_allVisualViewModelList == null)
			{
			_allVisualViewModelList = new List<HydroVisualViewModel>();
			var allVisualList = _hydroInfo.GetAllVisuals();
			if (allVisualList != null && allVisualList.Count > 0)
			{
			var allCalcuResultList = GetCalcuResultList();
			allVisualList.ForEach(x =>
			{
			var vm = HydroVisualViewModelBuilder.CreateVisualViewModel(x, _hydroInfo);
			var calcuResult = allCalcuResultList?.Find(x => x.Code == x.Code);
			if (calcuResult != null)
			{
			vm.UpdateCalcuProperty(calcuResult);
			}
			_allVisualViewModelList.Add(vm);
			});
			}
			}
			return _allVisualViewModelList;
			}

			//更新可见视图属性
			private void UpdateVisualViewModelProperty()
			{
			var allVisualViewModelList = GetVisualViewModelList();
			if (allVisualViewModelList != null && allVisualViewModelList.Count > 0)
			{
			allVisualViewModelList.ForEach(x =>
			{
			x.UpdateProperty();
			});
			}
			}

			//更新可见视图属性
			private void UpdateVisualViewModelProperty(List<string> codes)
			{
			if (codes == null \|\| codes.Count < 1)
			{
			return;
			}
			var allVisualViewModelList = GetVisualViewModelList();
			if (allVisualViewModelList != null && allVisualViewModelList.Count > 0)
			{
			allVisualViewModelList.ForEach(x =>
			{
			if (codes.Contains(x.Code))
			{
			x.UpdateProperty();
			}
			});
			}
			}

			//更新可见视图属性
			private void UpdateVisualViewModelProperty(List<Yw.Model.HydroVisualInfo> visualList)
			{
			if (visualList == null \|\| visualList.Count < 1)
			{
			return;
			}
			var allVisualViewModelList = GetVisualViewModelList();
			if (allVisualViewModelList != null && allVisualViewModelList.Count > 0)
			{
			allVisualViewModelList.ForEach(x =>
			{
			if (visualList.Exists(t => t.Code == x.Code))
			{
			x.UpdateProperty();
			}
			});
			}
			}

			//更新可见视图计算属性
			private void UpdateVisualViewModelCalcuProperty()
			{
			var allVisualViewModelList = GetVisualViewModelList();
			if (allVisualViewModelList != null && allVisualViewModelList.Count > 0)
			{
			var allCalcuResultList = GetCalcuResultList();
			if (allCalcuResultList != null && allCalcuResultList.Count > 0)
			{
			allVisualViewModelList.ForEach(x =>
			{
			var calcuResult = allCalcuResultList.Find(t => t.Code == x.Code);
			if (calcuResult != null)
			{
			x.UpdateCalcuProperty(calcuResult);
			}
			});
			}
			}
			}

			//获取构件视图
			private HydroVisualViewModel GetVisualViewModel(string code)
			{
			if (string.IsNullOrEmpty(code))
			{
			return default;
			}
			var allVisualViewModelList = GetVisualViewModelList();
			return allVisualViewModelList?.Find(x => x.Code == code);
			}

			//获取可见视图
			private HydroVisualViewModel GetVisualViewModel(Yw.Model.HydroVisualInfo visual)
			{
			if (visual == null)
			{
			return default;
			}
			var allVisualViewModelList = GetVisualViewModelList();
			return allVisualViewModelList?.Find(x => x.Code == visual.Code);
			}



			#endregion

			#region 构件明细控件

			//构件明细控件
			private Yw.WinFrmUI.HydroVisualListCtrl _visualListCtrl = null;

			//获取构件明细控件
			private Yw.WinFrmUI.HydroVisualListCtrl GetVisualListCtrl()
			{
			if (_visualListCtrl == null)
			{
			_visualListCtrl = new HydroVisualListCtrl();
			_visualListCtrl.Dock = DockStyle.Fill;
			_visualListCtrl.HydroClickInfoEvent += async (visual) =>
			{
			ShowSelectedProperty(visual);
			await _bimfaceCtrl?.ZoomAndSelectComponent(_selectedVisual?.Code);
			};
			_visualListCtrl.HydroChangedInfoEvent += (visualList) =>
			{
			UpdateSelectedProperty();
			AutoApplyGrading();
			};
			}
			return _visualListCtrl;
			}

			//构件明细控件是否可见
			private bool IsVisualListCtrlVisible
			{
			get
			{
			if (this.docPnlBottom.Visibility == DevExpress.XtraBars.Docking.DockVisibility.Visible)
			{
			if (this.controlContainerBottom.Controls.Count > 0)
			{
			if (this.controlContainerBottom.Controls[0] is HydroVisualListCtrl)
			{
			return true;
			}
			}
			}
			return false;
			}
			}

			//显示构件明细控件
			private void ShowVisualListCtrl()
			{
			if (_hydroInfo == null)
			{
			return;
			}
			if (IsVisualListCtrlVisible)
			{
			return;
			}

			var visualListCtrl = GetVisualListCtrl();
			var allVisualViewModelList = GetVisualViewModelList();
			visualListCtrl.SetBindingData(allVisualViewModelList);
			var allCalcuResultList = GetCalcuResultList();
			if (allCalcuResultList == null \|\| allCalcuResultList.Count < 1)
			{
			visualListCtrl.SetNormalView();
			}
			else
			{
			visualListCtrl.SetCalcuView();
			}
			this.controlContainerBottom.Controls.Clear();
			this.controlContainerBottom.Controls.Add(visualListCtrl);
			this.docPnlBottom.Visibility = DevExpress.XtraBars.Docking.DockVisibility.Visible;
			this.docPnlBottom.Text = "构件明细";
			this.docPnlBottom.Height = 350;
			}

			//更新构件明细控件
			private void UpdateVisualListCtrl()
			{
			if (!IsVisualListCtrlVisible)
			{
			return;
			}
			_visualListCtrl?.UpdateBindingData();
			}

			//构件明细
			private void barBtnHydroVisualList_ItemClick(object sender, DevExpress.XtraBars.ItemClickEventArgs e)
			{
			ShowVisualListCtrl();
			}

			#endregion

			#endregion

			#region 监测列表

			#region 测点列表

			//所有监测点列表
			private List<HydroMonitorVmo> _allMonitorList = null;

			//获取监测点列表
			private async Task<List<HydroMonitorVmo>> GetMonitorList()
			{
			if (_hydroInfo == null)
			{
			return default;
			}
			if (_allMonitorList == null)
			{
			_allMonitorList = await BLLFactory<Yw.BLL.HydroMonitor>.Instance.GetByModelID(_hydroInfo.ID);
			if (_allMonitorList == null)
			{
			_allMonitorList = new List<HydroMonitorVmo>();
			}
			}
			return _allMonitorList;
			}

			//更新监测点列表
			private async void UpdateMonitorList(string code)
			{
			if (_hydroInfo == null)
			{
			return;
			}
			if (string.IsNullOrEmpty(code))
			{
			return;
			}
			var allMonitorList = await GetMonitorList();
			allMonitorList.RemoveAll(x => x.Relation == code);
			var monitorList = await BLLFactory<Yw.BLL.HydroMonitor>.Instance.GetByRelation(_hydroInfo.ID, code);
			if (monitorList != null && monitorList.Count > 0)
			{
			allMonitorList.AddRange(monitorList);
			}
			UpdateMonitorValueList(code, monitorList);
			SetLogicMonitorList();
			}

			//设置选择构件监测点列表
			private async void SetSelectVisualMonitorList()
			{
			if (_hydroInfo == null)
			{
			return;
			}
			if (_selectedVisual == null)
			{
			return;
			}
			var allMonitorList = await GetMonitorList();
			var dlg = new SetHydroVisualMonitorDlg();
			dlg.SetBindingData(_hydroInfo, _selectedVisual, allMonitorList);
			dlg.ReloadDataEvent += async (hydroInfo, visual, list) =>
			{
			if (hydroInfo == null)
			{
			return;
			}
			if (visual == null)
			{
			return;
			}
			var bol = await BLLFactory<Yw.BLL.HydroMonitor>.Instance.Save(hydroInfo.ID, visual.Code, list);
			if (!bol)
			{
			TipFormHelper.ShowError("设置失败");
			return;
			}
			TipFormHelper.ShowSucceed("设置成功");
			UpdateMonitorList(visual.Code);
			};
			dlg.ShowDialog();
			}

			//设置监测点
			private void barBtnSetMonitor_ItemClick(object sender, DevExpress.XtraBars.ItemClickEventArgs e)
			{
			SetSelectVisualMonitorList();
			}

			#endregion

			#region 监测值列表

			//所有监测值列表
			private List<HydroVisualMonitorValueViewModel> _allMonitorValueList = null;

			//获取监测值列表
			private async Task<List<HydroVisualMonitorValueViewModel>> GetMonitorValueList()
			{
			if (_allMonitorValueList == null)
			{
			_allMonitorValueList = new List<HydroVisualMonitorValueViewModel>();
			var allMonitorList = await GetMonitorList();
			var allVisualViewModelList = GetVisualViewModelList();
			allMonitorList.ForEach(x =>
			{
			var visual = allVisualViewModelList.Find(t => t.Code == x.Relation);
			if (visual != null)
			{
			var vm = new HydroVisualMonitorValueViewModel(visual.Vmo, x);
			_allMonitorValueList.Add(vm);
			}
			});
			}
			return _allMonitorValueList;
			}

			//更新监测值列表
			private async void UpdateMonitorValueList(string code, List<HydroMonitorVmo> monitorList)
			{
			if (string.IsNullOrEmpty(code))
			{
			return;
			}
			var visual = GetVisualViewModel(code)?.Vmo;
			if (visual == null)
			{
			return;
			}
			var allMonitorValueList = await GetMonitorValueList();
			var monitorValueList = allMonitorValueList.Where(x => x.Vmo.Relation == code).ToList();
			monitorValueList?.ForEach(x =>
			{
			var result = monitorList?.Exists(t => t.Relation == x.Vmo.Relation && t.PropName == x.Vmo.PropName);
			if (!(result.HasValue && result.Value))
			{
			allMonitorValueList.Remove(x);
			}
			});
			monitorList?.ForEach(x =>
			{
			var result = monitorValueList?.Exists(t => t.Vmo.Relation == x.Relation && t.Vmo.PropName == x.PropName);
			if (!(result.HasValue && result.Value))
			{
			var vm = new HydroVisualMonitorValueViewModel(visual, x);
			allMonitorValueList.Add(vm);
			}
			});
			}

			#endregion

			#region 监测值列表控件

			//监测值列表控件
			private HydroVisualMonitorValueListCtrl _monitorValueListCtrl = null;

			//获取监测值列表控件
			private HydroVisualMonitorValueListCtrl GetMonitorValueListCtrl()
			{
			if (_monitorValueListCtrl == null)
			{
			_monitorValueListCtrl = new HydroVisualMonitorValueListCtrl();
			_monitorValueListCtrl.Dock = DockStyle.Fill;
			_monitorValueListCtrl.HydroViewEvent += (code) =>
			{
			_bimfaceCtrl?.ZoomToComponent(code);
			};
			}
			return _monitorValueListCtrl;
			}

			//显示监测值列表控件
			private async void ShowMonitorValueListCtrl()
			{
			var monitorValueListCtrl = GetMonitorValueListCtrl();
			var allMonitorValueList = await GetMonitorValueList();
			monitorValueListCtrl.SetBindingData(allMonitorValueList);
			this.controlContainerBottom.Controls.Clear();
			this.controlContainerBottom.Controls.Add(monitorValueListCtrl);
			this.docPnlBottom.Visibility = DevExpress.XtraBars.Docking.DockVisibility.Visible;
			this.docPnlBottom.Text = "监测值";
			this.docPnlBottom.Height = 350;
			}

			//设置监测值
			private void barBtnSetMonitorValue_ItemClick(object sender, DevExpress.XtraBars.ItemClickEventArgs e)
			{
			ShowMonitorValueListCtrl();
			}

			#endregion

			#region 监测列表显示

			//监测是否显示
			private bool _isMonitorVisible = false;

			//获取业务监测列表
			private async Task<List<LogicMonitor>> GetLogicMonitorList()
			{
			var allMonitorList = await GetMonitorList();
			var allLogicMonitorList = allMonitorList.Select(x =>
			{
			var logicMonitor = new LogicMonitor();
			logicMonitor.Id = x.Relation;
			logicMonitor.PropName = x.PropName;
			logicMonitor.Description = x.Description;
			return logicMonitor;
			}).ToList();
			return allLogicMonitorList;
			}

			//设置业务监测列表
			private async void SetLogicMonitorList()
			{
			if (_isMonitorVisible)
			{
			var allLogicMonitorList = await GetLogicMonitorList();
			await _bimfaceCtrl?.SetLogicMonitors(allLogicMonitorList);
			}
			else
			{
			await _bimfaceCtrl?.ClearLogicMonitors();
			}
			}

			//显示状态改变
			private void barCkMonitor_CheckedChanged(object sender, DevExpress.XtraBars.ItemClickEventArgs e)
			{
			_isMonitorVisible = this.barCkMonitor.Checked;
			SetLogicMonitorList();
			}


			#endregion

			#endregion

			#region 模拟检查

			#region 检查结果

			//检查结果缓存
			private HydroCheckResult _checkResult = null;

			//获取检查结果
			//needCheckAgain 用于确定是否需要重新检查
			private HydroCheckResult GetCheckResult(bool needCheckAgain = false)
			{
			if (_hydroInfo == null)
			{
			return default;
			}
			if (needCheckAgain)
			{
			_checkResult = _hydroInfo.Check();
			}
			if (_checkResult == null)
			{
			_checkResult = _hydroInfo.Check();
			}
			return _checkResult;
			}

			#endregion

			#region 检查控件

			//检查控件
			private HydroCheckResultCtrl _checkCtrl = null;

			//获取检查控件
			private HydroCheckResultCtrl GetCheckCtrl()
			{
			if (_checkCtrl == null)
			{
			_checkCtrl = new HydroCheckResultCtrl();
			_checkCtrl.Dock = DockStyle.Fill;
			_checkCtrl.HydroClickEvent += async (code) =>
			{
			if (_hydroInfo == null)
			{
			return;
			}
			var elementIds = new List<string>();
			if (string.IsNullOrEmpty(code))
			{
			this.SelectedVisual = null;
			}
			else
			{
			var allVisualViewModelList = GetVisualViewModelList();
			this.SelectedVisual = allVisualViewModelList?.Find(x => x.Code == code)?.Vmo;
			if (this.SelectedVisual != null)
			{
			elementIds.Add(this.SelectedVisual.Code);
			}
			}
			await _bimfaceCtrl?.ZoomAndSelectComponents(elementIds);
			ShowSelectedProperty();
			};
			}
			return _checkCtrl;
			}

			//显示检查控件
			//needCheckAgain 用于确定是否需要重新检查
			private void ShowCheckCtrl(bool needCheckAgain = false)
			{
			var checkResult = GetCheckResult(needCheckAgain);
			if (checkResult == null)
			{
			return;
			}
			var checkCtrl = GetCheckCtrl();
			checkCtrl.SetBindingData(checkResult);
			this.controlContainerBottom.Controls.Clear();
			this.controlContainerBottom.Controls.Add(checkCtrl);
			this.docPnlBottom.Visibility = DevExpress.XtraBars.Docking.DockVisibility.Visible;
			this.docPnlBottom.Text = "检查结果";
			this.docPnlBottom.Height = 350;
			}

			#endregion

			//检查
			private void barBtnCheck_ItemClick(object sender, DevExpress.XtraBars.ItemClickEventArgs e)
			{
			ShowCheckCtrl(true);
			}

			#endregion

			#region 导出INP文件

			//导出INP文件
			private void barBtnExportInp_ItemClick(object sender, DevExpress.XtraBars.ItemClickEventArgs e)
			{
			if (_hydroInfo == null)
			{
			return;
			}
			var fileName = FileDialogHelper.SaveInp("导出Inp文件");
			if (string.IsNullOrEmpty(fileName))
			{
			return;
			}
			var netWork = Yw.Hydro.ParseHelper.ToNetwork(_hydroInfo);
			var result = netWork.ToInpString();
			File.WriteAllText(fileName, result);
			TipFormHelper.ShowSucceed("导出成功");
			}

			#endregion

			#region 并联分析

			//并联分析
			private void ParallelAnalysis()
			{
			if (_hydroInfo == null)
			{
			return;
			}
			var pumps = _hydroInfo.Pumps;
			if (pumps == null \|\| pumps.Count < 1)
			{
			XtraMessageBox.Show("无水泵信息");
			return;
			}
			var vmList = new List<XhsSinglePumpViewModel>();
			foreach (var pump in pumps)
			{
			if (!pump.RatedN.HasValue)
			{
			continue;
			}
			var qh = _hydroInfo.Curves?.Find(t => t.Code == pump.CurveQH)?.CurveData;
			var qe = _hydroInfo.Curves?.Find(t => t.Code == pump.CurveQE)?.CurveData;
			var qp = _hydroInfo.Curves?.Find(t => t.Code == pump.CurveQP)?.CurveData;
			if (qh == null)
			{
			continue;
			}

			var qhPtList = qh.Select(x => new XhsSplinePointViewModel(x.X, x.Y)).ToList();
			var qePtList = qe?.Select(x => new XhsSplinePointViewModel(x.X, x.Y)).ToList();
			var qpPtList = qp?.Select(x => new XhsSplinePointViewModel(x.X, x.Y)).ToList();

			var vm = new XhsSinglePumpViewModel();
			vmList.Add(vm);
			vm.ID = pump.ID;
			vm.Name = pump.Name;
			vm.Code = pump.Code;
			vm.IsBp = true;
			vm.RunStatus = pump.LinkStatus == Yw.Hydro.LinkStatus.Open;
			vm.RatedHz = pump.RatedHz;
			vm.CurrentHz = Math.Round(pump.RatedHz * pump.SpeedRatio, 1);
			vm.RatedSpeed = pump.RatedN.Value;
			vm.CurrentSpeed = Math.Round(pump.RatedN.Value * pump.SpeedRatio, 1);
			vm.CurveQH = qhPtList;
			vm.CurveQE = qePtList;
			vm.CurveQP = qpPtList;

			}

			var dlg = new PumpParallelAnalyDlg();
			dlg.SetBindingData(vmList);
			dlg.ReloadDataEvent += (list) =>
			{
			list?.ForEach(x =>
			{
			var pump = pumps.Find(t => t.Code == x.Code);
			if (pump != null)
			{
			pump.LinkStatus = x.RunStatus ? Yw.Hydro.PumpStatus.Open : Yw.Hydro.PumpStatus.Closed;
			pump.SpeedRatio = x.CurrentHz / pump.RatedHz;
			}
			});
			var codes = list?.Select(x => x.Code).ToList();
			UpdateVisualViewModelProperty(codes);
			ShowSelectedProperty();
			UpdateVisualListCtrl();
			return true;
			};
			dlg.ShowDialog();
			}

			//并联
			private void barBtnParallel_ItemClick(object sender, DevExpress.XtraBars.ItemClickEventArgs e)
			{
			ParallelAnalysis();
			}

			#endregion

			#region 模拟计算

			//所有工况元组列表
			private Tuple<HydroWorkingVmo, HydroCheckResult, HydroCalcuResult> _allWorkingTupleList = null;


			private Yw.EPAnet.CalcuResult _calcuResult = null;//计算结果




			#region 工况


			//显示工况计算窗体
			private void ShowWorkingCalcuDlg()
			{
			var dlg = new SetHydroWorkingInfoDlg();
			dlg.HydroViewEvent += async (parter) =>
			{
			_selectedVisual = parter as Yw.Model.HydroVisualInfo;
			if (_selectedVisual != null)
			{
			await _bimfaceCtrl?.ZoomAndSelectComponents(new List<string>() { _selectedVisual.Code });
			}
			ShowSelectedProperty();
			};
			dlg.HydroCalcuEvent += async (hydroInfo, workingInfo) =>
			{
			if (_hydroInfo == null)
			{
			return;
			}
			_hydroInfo.UpdateWorkingInfo(workingInfo);
			//校验
			_checkResult = _hydroInfo.Check();
			if (!_checkResult.Succeed)
			{
			ShowCheckCtrl();
			TipFormHelper.ShowWarn("校验失败，请检查后重试");
			return;
			}

			WaitFormHelper.ShowWaitForm(this, "正在计算分析中，请稍候...");


			//await Task.Delay(5000);

			var netWork = Yw.Hydro.ParseHelper.ToNetwork(_hydroInfo);
			_calcuResult = netWork.CalcuMinorLoss();

			WaitFormHelper.HideWaitForm();
			if (_calcuResult.Succeed)
			{
			GetCalcuResultList(false);
			UpdateVisualViewModelProperty();
			UpdateVisualViewModelCalcuProperty();
			UpdateVisualListCtrl();
			UpdateSelectedProperty();
			await _bimfaceCtrl?.SetLogicCalcuCustomLabels(_calcuResult);
			TipFormHelper.ShowSucceed("计算成功！");
			var codes = _hydroInfo.Pumps.Select(x => x.Code).ToList();
			await _bimfaceCtrl?.ZoomAndSelectComponents(codes);
			}
			else
			{
			ShowCalcuFailedCtrl();
			TipFormHelper.ShowError("计算失败！");
			}
			AutoApplyGrading();
			UpdateVisualListCtrl();
			ShowSelectedProperty();
			};
			dlg.SetBindingData(_hydroInfo);
			dlg.ShowDialog();
			}

			#endregion

			#region 计算失败

			//计算失败控件
			private HydroCalcuFailedCtrl _calcuFailedCtrl = null;

			//获取计算失败控件
			private HydroCalcuFailedCtrl GetCalcuFailedCtrl()
			{
			if (_calcuFailedCtrl == null)
			{
			_calcuFailedCtrl = new HydroCalcuFailedCtrl();
			_calcuFailedCtrl.Dock = DockStyle.Fill;
			}
			return _calcuFailedCtrl;
			}

			//显示计算失败控件
			private void ShowCalcuFailedCtrl()
			{
			if (_hydroInfo == null)
			{
			return;
			}
			if (_calcuResult == null)
			{
			return;
			}
			if (_calcuResult.Succeed)
			{
			return;
			}
			var calcuFailedCtrl = GetCalcuFailedCtrl();
			calcuFailedCtrl.SetBindingData(_calcuResult.FailedList);
			this.controlContainerBottom.Controls.Clear();
			this.controlContainerBottom.Controls.Add(calcuFailedCtrl);
			this.docPnlBottom.Visibility = DevExpress.XtraBars.Docking.DockVisibility.Visible;
			this.docPnlBottom.Text = "计算失败原因";
			this.docPnlBottom.Height = 350;
			}

			#endregion

			#region 计算结果

			//所有计算结果列表
			private List<HydroCalcuVisualResult> _allCalcuResultList = null;

			//获取计算结果
			//true 使用缓存，false 不使用缓存
			private List<HydroCalcuVisualResult> GetCalcuResultList(bool isCache = true)
			{
			if (_hydroInfo == null)
			{
			return default;
			}
			if (_calcuResult == null)
			{
			return default;
			}
			if (!_calcuResult.Succeed)
			{
			return default;
			}
			if (isCache)
			{
			return _allCalcuResultList;
			}

			_allCalcuResultList = new List<HydroCalcuVisualResult>();

			//节点
			var allNodeList = _hydroInfo.GetAllNodes();
			if (allNodeList != null && allNodeList.Count > 0)
			{
			foreach (var node in allNodeList)
			{
			var calcuNode = _calcuResult.NodeList?.Find(x => x.Id == node.Code);
			if (calcuNode != null)
			{
			var calcuResult = new HydroCalcuNodeResult()
			{
			Code = node.Code,
			CalcuPress = calcuNode.Press,
			CalcuHead = calcuNode.Head,
			CalcuDemand = calcuNode.Demand
			};
			_allCalcuResultList.Add(calcuResult);
			}
			}
			}

			//管段
			var allLinkList = _hydroInfo.GetAllLinks();
			if (allLinkList != null && allLinkList.Count > 0)
			{
			foreach (var link in allLinkList)
			{
			var calcuLink = _calcuResult.LinkList?.Find(x => x.Id == link.Code);
			if (calcuLink != null)
			{
			var calcuResult = new HydroCalcuLinkResult()
			{
			Code = link.Code,
			CalcuFlow = calcuLink.Flow,
			CalcuVelocity = calcuLink.Velocity,
			CalcuHeadLoss = calcuLink.Headloss
			};
			_allCalcuResultList.Add(calcuResult);
			}
			}
			}

			//流量计
			var allFlowmeterList = _hydroInfo.Flowmeters;
			if (allFlowmeterList != null && allFlowmeterList.Count > 0)
			{
			foreach (var flowmeter in allFlowmeterList)
			{
			var calcuFlowmeterResult = _allCalcuResultList.Find(x => x.Code == flowmeter.Code) as HydroCalcuNodeResult;
			if (calcuFlowmeterResult != null)
			{
			var calcuFlowmeterNewResult = new HydroCalcuFlowmeterResult(calcuFlowmeterResult);
			var calcuFlowmeterLinkResultList = new List<HydroCalcuLinkResult>();
			var flowmeterLinkList = allLinkList?.Where(x => x.StartCode == flowmeter.Code \|\| x.EndCode == flowmeter.Code).ToList();
			if (flowmeterLinkList != null && flowmeterLinkList.Count > 0)
			{
			foreach (var flowmeterLink in flowmeterLinkList)
			{
			var calcuFlowmeterLinkResult = _allCalcuResultList.Find(x => x.Code == flowmeterLink.Code) as HydroCalcuLinkResult;
			if (calcuFlowmeterLinkResult != null)
			{
			calcuFlowmeterLinkResultList.Add(calcuFlowmeterLinkResult);
			}
			}
			}
			if (calcuFlowmeterLinkResultList.Exists(x => x.CalcuFlow.HasValue))
			{
			calcuFlowmeterNewResult.CalcuQ = calcuFlowmeterLinkResultList.Where(x => x.CalcuFlow.HasValue).Average(x => x.CalcuFlow.Value);
			}
			_allCalcuResultList.Remove(calcuFlowmeterResult);
			_allCalcuResultList.Add(calcuFlowmeterNewResult);
			}
			}
			}

			//压力表
			var allPressmeterList = _hydroInfo.Pressmeters;
			if (allPressmeterList != null && allPressmeterList.Count > 0)
			{
			foreach (var pressmeter in allPressmeterList)
			{
			var calcuPressmeterResult = _allCalcuResultList.Find(x => x.Code == pressmeter.Code) as HydroCalcuNodeResult;
			if (calcuPressmeterResult != null)
			{
			var calcuPressmeterNewResult = new HydroCalcuPressmeterResult(calcuPressmeterResult);
			calcuPressmeterNewResult.CalcuPr = calcuPressmeterResult.CalcuPress;
			_allCalcuResultList.Remove(calcuPressmeterResult);
			_allCalcuResultList.Add(calcuPressmeterNewResult);
			}
			}
			}

			//水泵
			var allPumpList = _hydroInfo.Pumps;
			if (allPumpList != null && allPumpList.Count > 0)
			{
			foreach (var pump in allPumpList)
			{
			var calcuPumpResult = _allCalcuResultList.Find(x => x.Code == pump.Code) as HydroCalcuLinkResult;
			if (calcuPumpResult != null)
			{
			var calcuPumpNewResult = new HydroCalcuPumpResult(calcuPumpResult);
			calcuPumpNewResult.CalcuQ = calcuPumpResult.CalcuFlow;
			if (calcuPumpNewResult.CalcuQ.HasValue)
			{
			var calcuNodeStartResult = _allCalcuResultList.Find(x => x.Code == pump.StartCode) as HydroCalcuNodeResult;
			var calcuNodeEndResult = _allCalcuResultList.Find(x => x.Code == pump.EndCode) as HydroCalcuNodeResult;
			if (calcuNodeStartResult != null && calcuNodeEndResult != null)
			{
			if (calcuNodeStartResult.CalcuPress.HasValue && calcuNodeEndResult.CalcuPress.HasValue)
			{
			calcuPumpNewResult.CalcuH = Math.Abs(calcuNodeStartResult.CalcuPress.Value - calcuNodeEndResult.CalcuPress.Value);
			}
			if (pump.LinkStatus == Yw.Hydro.PumpStatus.Open && pump.RatedN.HasValue)
			{
			var curveqp = _hydroInfo.Curves?.Find(x => x.Code == pump.CurveQP);
			if (curveqp != null)
			{
			if (curveqp.CurveData != null && curveqp.CurveData.Count > 3)
			{
			var point2dList = curveqp.CurveData.Select(x => new Yw.Geometry.Point2d(x.X, x.Y)).ToList();
			var point2dSimularList = point2dList.GetQPPointListByN(pump.RatedN.Value, pump.RatedN.Value * pump.SpeedRatio);
			var pumpCurveQp = new Yw.Pump.CurveQP(eFeatType.Cubic, point2dSimularList);
			calcuPumpNewResult.CalcuP = pumpCurveQp.FeatCurve.GetPointY(calcuPumpNewResult.CalcuQ.Value);
			}
			}
			}
			if (calcuPumpNewResult.CalcuH.HasValue && calcuPumpNewResult.CalcuP.HasValue)
			{
			calcuPumpNewResult.CalcuE = Yw.Pump.CalculationHelper.CalcuE(calcuPumpNewResult.CalcuQ.Value, calcuPumpNewResult.CalcuH.Value, calcuPumpNewResult.CalcuP.Value);
			}
			}
			}
			_allCalcuResultList.Remove(calcuPumpResult);
			_allCalcuResultList.Add(calcuPumpNewResult);
			}
			}
			}

			return _allCalcuResultList;
			}

			#endregion

			//水力计算
			private void barBtnHydroCalcu_ItemClick(object sender, DevExpress.XtraBars.ItemClickEventArgs e)
			{
			ShowWorkingCalcuDlg();
			}

			#endregion