HStation/XHS.V1.0.git

			@@ -11,76 +11,198 @@
			private const double _headTolerance = 5;
			private const double _powerTolerance = 0.05;

			private const double _valveLift = 10;//阀门开度范围
			private const int _angle = 1;//角度范围

			//资产自动匹配
			public static async Task<bool> Matching(AssetsMatchingViewModel assetsAutoMatchingView)
			public static bool Matching(HydroMatchingViewModel assetsAutoMatchingView, out string Error)
			{
			Error = string.Empty;
			bool IsMaching = false;
			var pumpMain = new BLL.PumpMain();
			var adaptingManage = new BLL.AdaptingManage();
			var pipeLineManage = new BLL.PipeLineManage();
			var valveMain = new BLL.ValveMain();
			var allPump = await pumpMain.GetAll();
			var allAdapting = await adaptingManage.GetAll();
			var allPipeLine = await pipeLineManage.GetAll();
			var allValve = await valveMain.GetAll();
			//泵匹配
			foreach (var item in assetsAutoMatchingView.PumpMatchingList)
			var AssetsPumpMain = new BLL.AssetsPumpMain();
			var AdaptingManage = new BLL.AdaptingManage();
			var pipeLineManage = new BLL.AssetsPipeMain();
			var AssetsValveMain = new BLL.AssetsValveMain();
			var AssetsElbowMain = new BLL.AssetsElbowMain();
			var AssetsThreelinkMain = new BLL.AssetsThreelinkMain();
			var AssetsFourlinkMain = new BLL.AssetsFourlinkMain();
			var AssetsSprinkler = new BLL.AssetsSprinklerMain();
			var AssetsExchanger = new BLL.AssetsExchangerMain();
			var AssetsCompressorMain = new BLL.AssetsCompressorMain();
			var AssetsBluntheadMain = new BLL.AssetsBluntheadMain();
			var AssetsTankMain = new BLL.AssetsTankMain();
			var AssetsMeterMain = new BLL.AssetsMeterMain();
			var AssetsFlowmeterMain = new BLL.AssetsFlowmeterMain();
			var AssetsHydrantMain = new BLL.AssetsHydrantMain();
			var AssetsPressmeterMain = new BLL.AssetsPressmeterMain();
			var AssetsTranslationMain = new BLL.AssetsTranslationMain();
			try
			{
			if (await MatchingPumps(item, allPump))
			var allPump = Task.Run(async () => await AssetsPumpMain.GetAll()).Result;
			// var allAdapting = Task.Run(async () => await adaptingManage.GetAll()).Result;
			var allPipeLine = Task.Run(async () => await pipeLineManage.GetAll()).Result;
			var allValve = Task.Run(async () => await AssetsValveMain.GetAll()).Result;
			var allElbow = Task.Run(async () => await AssetsElbowMain.GetAll()).Result;
			var allThreeLink = Task.Run(async () => await AssetsThreelinkMain.GetAll()).Result;
			var allFourLink = Task.Run(async () => await AssetsFourlinkMain.GetAll()).Result;
			var allSprinkler = Task.Run(async () => await AssetsSprinkler.GetAll()).Result;
			var allExchanger = Task.Run(async () => await AssetsExchanger.GetAll()).Result;
			var allCompressorMain = Task.Run(async () => await AssetsCompressorMain.GetAll()).Result;
			var allBluntheadMain = Task.Run(async () => await AssetsBluntheadMain.GetAll()).Result;
			var allTankMain = Task.Run(async () => await AssetsTankMain.GetAll()).Result;
			var allMeterMain = Task.Run(async () => await AssetsMeterMain.GetAll()).Result;
			var allFlowmeterMain = Task.Run(async () => await AssetsFlowmeterMain.GetAll()).Result;
			var allHydrantMain = Task.Run(async () => await AssetsHydrantMain.GetAll()).Result;
			var allPressmeterMain = Task.Run(async () => await AssetsPressmeterMain.GetAll()).Result;
			var allTranslationMain = Task.Run(async () => await AssetsTranslationMain.GetAll()).Result;
			//泵匹配
			foreach (var item in assetsAutoMatchingView.Pumps)
			{
			IsMaching = true;
			if (MatchingPumps(item, allPump))
			{
			IsMaching = true;
			}
			}
			//三通匹配
			foreach (var item in assetsAutoMatchingView.Threelinks)
			{
			if (MatchingThreelink(item, allThreeLink))
			{
			IsMaching = true;
			}
			}
			//四通匹配
			foreach (var item in assetsAutoMatchingView.Fourlinks)
			{
			if (MatchingFourlink(item, allFourLink))
			{
			IsMaching = true;
			}
			}
			//管道匹配
			foreach (var item in assetsAutoMatchingView.Pipes)
			{
			if (MatchingPipe(item, allPipeLine))
			{
			IsMaching = true;
			}
			}
			//阀门匹配
			foreach (var item in assetsAutoMatchingView.Valves)
			{
			if (MatchingValve(item, allValve))
			{
			IsMaching = true;
			}
			}
			//弯头匹配
			foreach (var item in assetsAutoMatchingView.Elbows)
			{
			if (MatchingElbow(item, allElbow))
			{
			IsMaching = true;
			}
			}
			//喷头匹配
			foreach (var item in assetsAutoMatchingView.Nozzles)
			{
			if (MatchingSprinkler(item, allSprinkler))
			{
			IsMaching = true;
			}
			}
			//闷头匹配
			foreach (var item in assetsAutoMatchingView.Bluntheads)
			{
			if (MatchingBlunthead(item, allBluntheadMain))
			{
			IsMaching = true;
			}
			}
			//换热器匹配
			foreach (var item in assetsAutoMatchingView.Exchangers)
			{
			if (MatchingExchanger(item, allExchanger))
			{
			IsMaching = true;
			}
			}
			//压缩机匹配
			foreach (var item in assetsAutoMatchingView.Compressors)
			{
			if (MatchingCompressor(item, allCompressorMain))
			{
			IsMaching = true;
			}
			}
			//水池匹配
			foreach (var item in assetsAutoMatchingView.Tanks)
			{
			if (MatchingTank(item, allTankMain))
			{
			IsMaching = true;
			}
			}
			//水表匹配
			foreach (var item in assetsAutoMatchingView.Meters)
			{
			if (MatchingMeter(item, allMeterMain))
			{
			IsMaching = true;
			}
			}
			//流量计匹配
			foreach (var item in assetsAutoMatchingView.Flowmeters)
			{
			if (MatchingFlowmeter(item, allFlowmeterMain))
			{
			IsMaching = true;
			}
			}
			//消火栓匹配
			foreach (var item in assetsAutoMatchingView.Hydrants)
			{
			if (MatchingHydrant(item, allHydrantMain))
			{
			IsMaching = true;
			}
			}
			//压力表匹配
			foreach (var item in assetsAutoMatchingView.Pressmeters)
			{
			if (MatchingPressmeter(item, allPressmeterMain))
			{
			IsMaching = true;
			}
			}
			//过渡件匹配
			foreach (var item in assetsAutoMatchingView.Translations)
			{
			if (MatchingTranslation(item, allTranslationMain))
			{
			IsMaching = true;
			}
			}
			}
			//三通匹配
			foreach (var item in assetsAutoMatchingView.ThreelinkMatchingList)
			catch (Exception ex)
			{
			if (MatchingThreelink(item, allAdapting))
			{
			IsMaching = true;
			}
			}
			//四通匹配
			foreach (var item in assetsAutoMatchingView.FourlinkMatchingList)
			{
			if (MatchingFourlink(item, allAdapting))
			{
			IsMaching = true;
			}
			}
			//管道匹配
			foreach (var item in assetsAutoMatchingView.PipeMatchingList)
			{
			if (MatchingPipe(item, allPipeLine))
			{
			IsMaching = true;
			}
			}
			//阀门匹配
			foreach (var item in assetsAutoMatchingView.ValveMatchingList)
			{
			if (MatchingValve(item, allValve))
			{
			IsMaching = true;
			}
			}
			//弯头匹配
			foreach (var item in assetsAutoMatchingView.ElbowsMatchingList)
			{
			if (MatchingElbow(item, allAdapting))
			{
			IsMaching = true;
			}
			Error = ex.Message;
			return false;
			}
			return IsMaching;
			}

			//泵匹配
			public static async Task<bool> MatchingPumps(PumpMatchingViewModel InputModel, List<Vmo.PumpMainVmo> pumpMainVmos)
			public static bool MatchingPumps(HydroPumpMatchingViewModel InputModel, List<Vmo.AssetsPumpMainVmo> AssetsPumpMainVmos)
			{
			Vmo.PumpMainVmo vmo = null;
			if (AssetsPumpMainVmos == null)
			{
			return true;
			}
			Vmo.AssetsPumpMainVmo vmo = null;
			int startCount = 0;
			// 尝试绝对匹配
			var absoluteMatch = pumpMainVmos.Where(item =>
			var absoluteMatch = AssetsPumpMainVmos.Where(item =>
			(InputModel.RatedN == null \|\| InputModel.RatedN == item.RatedSpeed) &&
			(InputModel.RatedQ == null \|\| InputModel.RatedQ == item.RatedFlow) &&
			(InputModel.RatedH == null \|\| InputModel.RatedH == item.RatedHead) &&
			@@ -100,7 +222,7 @@
			else
			{
			// 尝试区间匹配
			var rangeMatch = pumpMainVmos.Where(item =>
			var rangeMatch = AssetsPumpMainVmos.Where(item =>
			(InputModel.RatedN.HasValue ? Math.Abs(InputModel.RatedN.Value - item.RatedSpeed) <= _speedTolerance : true) &&
			(InputModel.RatedQ.HasValue ? Math.Abs(InputModel.RatedQ.Value - item.RatedFlow) <= _flowTolerance : true) &&
			(InputModel.RatedH.HasValue ? Math.Abs(InputModel.RatedH.Value - item.RatedHead) <= _headTolerance : true) &&
			@@ -121,7 +243,7 @@
			//
			if (vmo == null)
			{
			foreach (var item in pumpMainVmos)
			foreach (var item in AssetsPumpMainVmos)
			{
			int commonCount = GetIntersect(InputModel.ModelType, item.Name);
			if (commonCount > startCount)
			@@ -139,38 +261,39 @@
			InputModel.MatchingRatedP = vmo.RatedPower;
			InputModel.MatchingDbId = vmo.ID.ToString();
			InputModel.MatchingModelType = vmo.Name;
			var list = await new BLL.XhsPumpMainPhartMappingExtensions().GetByPumpMainID(vmo.ID);
			var list = Task.Run(async () => await new BLL.XhsPumpMainPhartMappingExtensions().GetByPumpMainID(vmo.ID)).Result;
			if (list != null && list.Count > 0)
			{
			InputModel.MatchingCurveDbId = list.First().ID.ToString();
			var graph_qh = list.First().Diagram.GraphList.Find(x => x.GraphType == HStation.PhartRelation.eGraphType.PumpQH);
			var graph_qe = list.First().Diagram.GraphList.Find(x => x.GraphType == HStation.PhartRelation.eGraphType.PumpQE);
			var graph_qp = list.First().Diagram.GraphList.Find(x => x.GraphType == HStation.PhartRelation.eGraphType.PumpQP);
			var maxImportanceItem = list.OrderByDescending(x => x.Importance).First();
			InputModel.MatchingCurveDbId = maxImportanceItem.ID.ToString();
			var graph_qh = maxImportanceItem.Diagram.GraphList.Find(x => x.GraphType == HStation.PhartRelation.eGraphType.PumpQH);
			var graph_qe = maxImportanceItem.Diagram.GraphList.Find(x => x.GraphType == HStation.PhartRelation.eGraphType.PumpQE);
			var graph_qp = maxImportanceItem.Diagram.GraphList.Find(x => x.GraphType == HStation.PhartRelation.eGraphType.PumpQP);
			if (graph_qh != null)
			{
			var points_qh = PhartPerformCurveHelper.GetFeatPointList(graph_qh.GraphType, graph_qh.GeometryInfo, 100, null);
			InputModel.MatchingCurveQH = new List<CurvePointMatchingViewModel>();
			InputModel.MatchingCurveQH = new List<HydroCurvePointViewModel>();
			foreach (var item in points_qh)
			{
			InputModel.MatchingCurveQH.Add(new CurvePointMatchingViewModel(item.X, item.Y));
			InputModel.MatchingCurveQH.Add(new HydroCurvePointViewModel(item.X, item.Y));
			}
			}
			if (graph_qe != null)
			{
			var points_qe = PhartPerformCurveHelper.GetFeatPointList(graph_qe.GraphType, graph_qe.GeometryInfo, 100, null);
			InputModel.MatchingCurveQE = new List<CurvePointMatchingViewModel>();
			InputModel.MatchingCurveQE = new List<HydroCurvePointViewModel>();
			foreach (var item in points_qe)
			{
			InputModel.MatchingCurveQE.Add(new CurvePointMatchingViewModel(item.X, item.Y));
			InputModel.MatchingCurveQE.Add(new HydroCurvePointViewModel(item.X, item.Y));
			}
			}
			if (graph_qp != null)
			{
			var points_qp = PhartPerformCurveHelper.GetFeatPointList(graph_qp.GraphType, graph_qp.GeometryInfo, 100, null);
			InputModel.MatchingCurveQP = new List<CurvePointMatchingViewModel>();
			InputModel.MatchingCurveQP = new List<HydroCurvePointViewModel>();
			foreach (var item in points_qp)
			{
			InputModel.MatchingCurveQP.Add(new CurvePointMatchingViewModel(item.X, item.Y));
			InputModel.MatchingCurveQP.Add(new HydroCurvePointViewModel(item.X, item.Y));
			}
			}
			}
			@@ -180,520 +303,1559 @@
			}

			//阀门匹配
			public static bool MatchingValve(ValveMatchingViewModel input, List<Vmo.ValveMainVmo> adaptingManageVmos)
			public static bool MatchingValve(HydroValveMatchingViewModel input, List<Vmo.AssetsValveMainVmo> valveMainVmos)
			{
			HStation.Vmo.ValveMainVmo vmo = null;
			int firstCount = 0;
			bool isNotarize = false; //是否确定
			if (valveMainVmos == null)
			{
			return true;
			}
			HStation.Vmo.AssetsValveMainVmo vmo = null;
			//口径最小差值
			// 绝对匹配
			var absoluteMatch = adaptingManageVmos.Where(i =>
			((i.Caliber == null) \|\| i.Caliber == input.Diameter) &&
			((input.Material == null && i.Material == "默认") \|\| i.Material == input.Material)).ToList();
			if (absoluteMatch.Any())
			valveMainVmos = valveMainVmos.Where(x => (int)x.ValveType == (int)input.ValveType).ToList();

			var nameMatching = valveMainVmos.Where(x =>
			(x.KeyWord != null && x.KeyWord.Any(keyword => GetIntersect(keyword, input.ModelType) >= 1)) \|\|
			(x.KeyWord == null \|\| !x.KeyWord.Any()) && GetIntersect(x.Name, input.ModelType) >= 1
			) //先进行筛选,后进行从大到小排序
			.OrderByDescending(x =>
			(x.KeyWord != null && x.KeyWord.Any(keyword => GetIntersect(keyword, input.ModelType) >= 1)) \|\|
			(x.KeyWord == null \|\| !x.KeyWord.Any()) && GetIntersect(x.Name, input.ModelType) >= 1)
			.ToList();//使用型号名或者关键字找出相同字符在1以上并且进行排序

			if (nameMatching.Count > 0)
			{
			foreach (var range in absoluteMatch)
			var absoluteMatching = nameMatching.Where(i =>
			((i.Caliber == null) \|\| Math.Abs(Convert.ToInt64(i.Caliber) - input.Diameter) <= _caliberTolerance) && //直径约束
			i.Material == input.Material //材料约束
			).ToList();
			if (absoluteMatching.Count > 1)
			{
			int commonCount = GetIntersect(input.ModelType, range.Name);
			if (commonCount > firstCount)
			var defaultList = absoluteMatching.Where(x => x.Flags.Contains("默认值")).ToList();
			//取默认
			if (defaultList.Count > 0)
			{
			vmo = range;
			firstCount = commonCount;
			vmo = defaultList.First();
			}
			else if (defaultList.Count <= 0)
			{
			vmo = valveMainVmos.First();
			}
			}
			else if (absoluteMatching.Count == 1)
			{
			isNotarize = true;

			vmo = absoluteMatching.First();
			}
			else
			vmo = valveMainVmos.First();
			}
			else if (nameMatching.Count == 1)
			{
			isNotarize = true;

			vmo = nameMatching.First();
			}
			else
			{
			//区间匹配
			var rangeMatch = adaptingManageVmos.Where(item =>
			var absoluteMatching = valveMainVmos.Where(i =>
			((i.Caliber == null) \|\| Math.Abs(Convert.ToInt64(i.Caliber) - input.Diameter) <= _caliberTolerance) && //直径约束
			i.Material == input.Material //材料约束
			).ToList();
			if (absoluteMatching.Count > 1)
			{
			if (item.Caliber.HasValue)
			var defaultList = absoluteMatching.Where(x => x.Flags.Contains("默认值")).ToList();
			//取默认
			if (defaultList.Count > 0)
			{
			return Math.Abs(Convert.ToInt64(item.Caliber - input.Diameter)) <= _caliberTolerance;
			vmo = defaultList.First();
			}
			else
			else if (defaultList.Count <= 0)
			{
			if (item.Caliber == null)
			{
			return true;
			}
			}
			return false;
			})
			.ToList();
			if (rangeMatch != null && rangeMatch.Count > 0)
			{
			var materialList = new List<Vmo.ValveMainVmo>();
			foreach (var range in rangeMatch)
			{
			//以材料为条件开始匹配
			if (range.Material == "默认")
			{
			materialList.Add(range);
			}
			else
			{
			int commonCount = GetIntersect(input.Material, range.Material);
			if (commonCount > firstCount)
			{
			materialList.Add(range);
			firstCount = commonCount;
			}
			}
			}
			//用已经筛选完成的列表中以名称筛选
			firstCount = 0;
			foreach (var material in materialList)
			{
			int commonCount = GetIntersect(input.ModelType, material.Name);
			if (commonCount > firstCount)
			{
			vmo = material;
			firstCount = commonCount;
			}
			vmo = valveMainVmos.First();
			}
			}
			}
			//口径和材料都没有匹配上,就用型号名匹配
			firstCount = 0;
			if (vmo == null)
			{
			foreach (var item in adaptingManageVmos)
			else if (absoluteMatching.Count == 1)
			{
			int commonCount = GetIntersect(input.ModelType, item.Name);
			if (commonCount > firstCount)
			{
			vmo = item;
			firstCount = commonCount;
			}
			isNotarize = true;

			vmo = absoluteMatching.First();
			}
			else
			vmo = valveMainVmos.First();
			}
			if (vmo != null)
			{
			input.MatchingMinorLoss = vmo.Coefficient;
			input.MatchingDbId = vmo.ID.ToString();
			input.MatchingDiameter = vmo.Caliber;
			input.MatchingMaterial = vmo.Material;
			input.MatchingModelType = vmo.Name;
			// input.MatchingValveSetting =
			input.MatchingValveType = vmo.Type.ToString();
			if (!isNotarize)
			{
			if (input.CurveDbId == null)
			{
			if ((int)input.ValveType == (int)HStation.Assets.eValveType.GPV)
			{
			var curveList = Task.Run(async () => await new BLL.AssetsValveCoefficient().GetByMainID(vmo.ID)).Result;
			if (curveList != null && curveList.Count > 0)
			{
			input.MatchingCurveDbId = curveList.First().ID.ToString();
			var pt_list = Yw.JsonHelper.Json2Object<List<HydroCurvePointViewModel>>(curveList.First().MinorLossCurve);
			input.MatchingCurveQL = pt_list;
			}
			}
			else if ((int)vmo.ValveType == (int)HStation.Assets.eValveType.TCV)
			{
			var curveList = Task.Run(async () => await new BLL.AssetsValveCoefficient().GetByMainID(vmo.ID)).Result;
			if (curveList != null && curveList.Count > 0)
			{
			input.MatchingCurveDbId = curveList.First().ID.ToString();
			var pt_list = Yw.JsonHelper.Json2Object<List<HydroCurvePointViewModel>>(curveList.First().OpenLossCurve);
			input.MatchingCurveOL = pt_list;
			}
			}
			}
			if (input.MinorLoss < 0)
			{
			input.MatchingMinorLoss = vmo.MinorLoss;
			}
			if (!input.MatchingDiameter.HasValue)
			input.MatchingDiameter = vmo.Caliber;
			if (input.ValveSetting == null)
			input.MatchingValveSetting = vmo.ValveSetting;
			}
			else
			{
			input.MatchingMinorLoss = vmo.MinorLoss;
			input.MatchingDbId = vmo.ID.ToString();
			input.MatchingDiameter = vmo.Caliber;
			input.MatchingMaterial = vmo.Material;
			input.MatchingModelType = vmo.Name;
			input.MatchingValveSetting = vmo.ValveSetting;
			input.MatchingValveType = (eValveType?)(int)vmo.ValveType;
			if (vmo.ValveType == HStation.Assets.eValveType.GPV)
			{
			var curveList = Task.Run(async () => await new BLL.AssetsValveCoefficient().GetByMainID(vmo.ID)).Result;
			if (curveList != null && curveList.Count > 0)
			{
			input.MatchingCurveDbId = curveList.First().ID.ToString();
			var pt_list = Yw.JsonHelper.Json2Object<List<HydroCurvePointViewModel>>(curveList.First().MinorLossCurve);
			input.MatchingCurveQL = pt_list;
			}
			}
			else if (vmo.ValveType == HStation.Assets.eValveType.TCV)
			{
			var curveList = Task.Run(async () => await new BLL.AssetsValveCoefficient().GetByMainID(vmo.ID)).Result;
			if (curveList != null && curveList.Count > 0)
			{
			input.MatchingCurveDbId = curveList.First().ID.ToString();
			var pt_list = Yw.JsonHelper.Json2Object<List<HydroCurvePointViewModel>>(curveList.First().OpenLossCurve);
			input.MatchingCurveOL = pt_list;
			}
			}
			}
			return true;
			}
			return false;
			}

			//管道匹配
			public static bool MatchingPipe(PipeMatchingViewModel input, List<Vmo.PipeLineManageVmo> pipeLineManageVmos)
			public static bool MatchingPipe(HydroPipeMatchingViewModel input, List<Vmo.AssetsPipeMainVmo> pipeLineMainVmos)
			{
			Vmo.PipeLineManageVmo vmo = null;
			int StartCount = 0;
			//口径最小差值
			// 绝对匹配
			var absoluteMatch = pipeLineManageVmos.Where(i =>
			((i.Caliber == null) \|\| i.Caliber == input.Diameter) &&
			((input.Material == null && i.Material == "默认") \|\| i.Material == input.Material)).ToList();
			if (absoluteMatch.Any())
			bool isNotarize = false; //是否确定
			if (pipeLineMainVmos == null)
			{
			foreach (var range in absoluteMatch)
			return true;
			}
			Vmo.AssetsPipeMainVmo vmo = null;

			var nameMatching = pipeLineMainVmos.Where(x =>
			(x.KeyWord != null && x.KeyWord.Any(keyword => GetIntersect(keyword, input.ModelType) >= 1)) \|\|
			(x.KeyWord == null \|\| !x.KeyWord.Any()) && GetIntersect(x.Name, input.ModelType) >= 1
			) //先进行筛选,后进行从大到小排序
			.OrderByDescending(x =>
			(x.KeyWord != null && x.KeyWord.Any(keyword => GetIntersect(keyword, input.ModelType) >= 1)) \|\|
			(x.KeyWord == null \|\| !x.KeyWord.Any()) && GetIntersect(x.Name, input.ModelType) >= 1).ToList();

			if (nameMatching.Count > 1)
			{
			var absoluteMatching = nameMatching.Where(i =>
			((i.Caliber == null) \|\| Math.Abs(Convert.ToInt64(i.Caliber) - input.Diameter) <= _caliberTolerance) && //直径约束
			i.Material == input.Material //材料约束
			).ToList();
			if (absoluteMatching.Count > 1)
			{
			int commonCount = GetIntersect(input.ModelType, range.Name);
			if (commonCount > StartCount)
			var defaultList = absoluteMatching.Where(x => x.Flags.Contains("默认值")).ToList();
			//取默认
			if (defaultList.Count > 0)
			{
			vmo = range;
			StartCount = commonCount;
			vmo = defaultList.First();
			}
			else if (defaultList.Count <= 0)
			{
			vmo = pipeLineMainVmos.First();
			}
			}
			else if (absoluteMatching.Count == 1)
			{
			isNotarize = true;

			vmo = absoluteMatching.First();
			}
			else
			vmo = pipeLineMainVmos.First();
			}
			else if (nameMatching.Count == 1)
			{
			isNotarize = true;

			vmo = nameMatching.First();
			}
			else
			{
			//区间匹配
			var rangeMatch = pipeLineManageVmos.Where(item =>
			var absoluteMatching = pipeLineMainVmos.Where(i =>
			((i.Caliber == null) \|\| Math.Abs(Convert.ToInt64(i.Caliber) - input.Diameter) <= _caliberTolerance) && //直径约束
			i.Material == input.Material //材料约束
			).ToList();
			if (absoluteMatching.Count > 1)
			{
			if (item.Caliber != null)
			var defaultList = absoluteMatching.Where(x => x.Flags.Contains("默认值")).ToList();
			//取默认
			if (defaultList.Count > 0)
			{
			return Math.Abs(Convert.ToInt64(item.Caliber - input.Diameter)) <= _caliberTolerance;
			vmo = defaultList.First();
			}
			return false;
			})
			.ToList();
			if (rangeMatch != null)
			{
			foreach (var range in rangeMatch)
			else if (defaultList.Count <= 0)
			{
			//以材料为条件开始匹配
			int commonCount = GetIntersect(input.Material, range.Material);
			if (commonCount > StartCount)
			{
			vmo = range;
			StartCount = commonCount;
			}
			vmo = pipeLineMainVmos.First();
			}
			}
			}
			//口径和材料都没有匹配上,就用型号名匹配
			if (vmo == null)
			{
			foreach (var item in pipeLineManageVmos)
			else if (absoluteMatching.Count == 1)
			{
			int commonCount = GetIntersect(input.ModelType, item.Name);
			if (commonCount > StartCount)
			{
			vmo = item;
			StartCount = commonCount;
			}
			isNotarize = true;
			vmo = absoluteMatching.First();
			}
			else
			vmo = pipeLineMainVmos.First();
			}
			if (vmo != null)
			{
			switch (input.eAlgorithmType)
			if (!isNotarize)
			{
			case HStation.Assets.eAlgorithmType.Hazen:
			input.MatchingRoughness = vmo.Hazen;
			break;
			if (input.DbId == null)
			input.MatchingDbId = vmo.ID.ToString();
			if (input.Material == null)
			input.MatchingMaterial = vmo.Material;
			if (input.MinorLoss < 0)
			input.MatchingMinorLoss = vmo.MinorLoss;
			switch (input.eAlgorithmType)
			{
			case eAlgorithmType.Hazen:
			input.MatchingRoughness = vmo.Hazen;
			break;

			case HStation.Assets.eAlgorithmType.Manning:
			input.MatchingRoughness = vmo.Manning;
			break;
			case eAlgorithmType.Manning:
			input.MatchingRoughness = vmo.Manning;
			break;

			case HStation.Assets.eAlgorithmType.Darcy:
			input.MatchingRoughness = vmo.Darcy;
			break;
			case eAlgorithmType.Darcy:
			input.MatchingRoughness = vmo.Darcy;
			break;

			default:
			input.MatchingRoughness = vmo.Hazen;
			break;
			default:
			input.MatchingRoughness = vmo.Hazen;
			break;
			}
			}
			else
			{
			switch (input.eAlgorithmType)
			{
			case eAlgorithmType.Hazen:
			input.MatchingRoughness = vmo.Hazen;
			break;

			case eAlgorithmType.Manning:
			input.MatchingRoughness = vmo.Manning;
			break;

			case eAlgorithmType.Darcy:
			input.MatchingRoughness = vmo.Darcy;
			break;

			default:
			input.MatchingRoughness = vmo.Hazen;
			break;
			}
			input.MatchingDbId = vmo.ID.ToString();
			input.MatchingMaterial = vmo.Material;
			input.MatchingModelType = vmo.Name;
			input.MatchingMinorLoss = vmo.MinorLoss;
			}
			input.MatchingDbId = vmo.ID.ToString();
			input.MatchingMaterial = vmo.Material;
			input.MatchingModelType = vmo.Name;
			input.MatchingMinorLoss = vmo.Coefficient;
			return true;
			}
			return false;
			}

			//弯头匹配
			public static bool MatchingElbow(ElbowMatchingViewModel input, List<Vmo.AdaptingManageVmo> adaptingManageVmos)
			public static bool MatchingElbow(HydroElbowMatchingViewModel input, List<Vmo.AssetsElbowMainVmo> elbowMainVmos)
			{
			Vmo.AdaptingManageVmo vmo = null;
			int firstCount = 0;
			//口径最小差值
			// 绝对匹配
			var absoluteMatch = adaptingManageVmos.Where(i =>
			((input.Caliber == null && i.Caliber == null) \|\| i.Caliber == input.Caliber) &&
			((input.Material == null && i.Material == "默认") \|\| i.Material == input.Material)).ToList();
			if (absoluteMatch.Any())
			bool isNotarize = false; //是否确定
			if (elbowMainVmos == null \|\| input == null \|\| elbowMainVmos.Count == 0)
			{
			foreach (var range in absoluteMatch)
			return true;
			}
			Vmo.AssetsElbowMainVmo vmo = null;
			var nameMatching = elbowMainVmos.Where(x =>
			(x.KeyWord != null && x.KeyWord.Any(keyword => GetIntersect(keyword, input.ModelType) >= 1)) \|\|
			(x.KeyWord == null \|\| !x.KeyWord.Any()) && GetIntersect(x.Name, input.ModelType) >= 1
			) //先进行筛选,后进行从大到小排序
			.OrderByDescending(x =>
			(x.KeyWord != null && x.KeyWord.Any(keyword => GetIntersect(keyword, input.ModelType) >= 1)) \|\|
			(x.KeyWord == null \|\| !x.KeyWord.Any()) && GetIntersect(x.Name, input.ModelType) >= 1).ToList();

			if (nameMatching.Count > 1)
			{
			var absoluteMatching = nameMatching.Where(i =>
			((i.Caliber == null \|\| input.Caliber == null) \|\| Math.Abs(Convert.ToInt64(i.Caliber) - Convert.ToInt64(input.Caliber)) <= _caliberTolerance) && //直径约束
			i.Material == input.Material //材料约束
			).ToList();
			if (absoluteMatching.Count > 1)
			{
			int commonCount = GetIntersect(input.ModelType, range.Name);
			if (commonCount > firstCount)
			var defaultList = absoluteMatching.Where(x => x.Flags.Contains("默认值")).ToList();
			//取默认
			if (defaultList.Count > 0)
			{
			vmo = range;
			firstCount = commonCount;
			vmo = defaultList.First();
			}
			else if (defaultList.Count <= 0)
			{
			vmo = elbowMainVmos.First();
			}
			}
			else if (absoluteMatching.Count == 1)
			{
			isNotarize = true;
			vmo = absoluteMatching.First();
			}
			else
			vmo = elbowMainVmos.First();
			}
			else if (nameMatching.Count == 1)
			{
			isNotarize = true;
			vmo = nameMatching.First();
			}
			else
			{
			//区间匹配
			var rangeMatch = adaptingManageVmos.Where(item =>
			var absoluteMatching = elbowMainVmos.Where(i =>
			((i.Caliber == null \|\| input.Caliber == null) \|\| Math.Abs(Convert.ToInt64(i.Caliber) - Convert.ToInt64(input.Caliber)) <= _caliberTolerance) && //直径约束
			i.Material == input.Material //材料约束
			).ToList();
			if (absoluteMatching.Count > 1)
			{
			if (item.Caliber != null && input.Caliber != null)
			var defaultList = absoluteMatching.Where(x => x.Flags.Contains("默认值")).ToList();
			//取默认
			if (defaultList.Count > 0)
			{
			return Math.Abs(Convert.ToInt64(item.Caliber - input.Caliber)) <= _caliberTolerance;
			vmo = defaultList.First();
			}
			else
			else if (defaultList.Count <= 0)
			{
			if (item.Caliber == null)
			{
			return true;
			}
			}
			return false;
			})
			.ToList();
			if (rangeMatch != null && rangeMatch.Count > 0)
			{
			var materialList = new List<Vmo.AdaptingManageVmo>();
			foreach (var range in rangeMatch)
			{
			//以材料为条件开始匹配
			if (range.Material == "默认")
			{
			materialList.Add(range);
			}
			else
			{
			int commonCount = GetIntersect(input.Material, range.Material);
			if (commonCount > firstCount)
			{
			materialList.Add(range);
			firstCount = commonCount;
			}
			}
			}
			//用已经筛选完成的列表中以名称筛选
			firstCount = 0;
			foreach (var material in materialList)
			{
			int commonCount = GetIntersect(input.ModelType, material.Name);
			if (commonCount > firstCount)
			{
			vmo = material;
			firstCount = commonCount;
			}
			vmo = elbowMainVmos.First();
			}
			}
			}
			//口径和材料都没有匹配上,就用型号名匹配
			firstCount = 0;
			if (vmo == null)
			{
			foreach (var item in adaptingManageVmos)
			else if (absoluteMatching.Count == 1)
			{
			int commonCount = GetIntersect(input.ModelType, item.Name);
			if (commonCount > firstCount)
			{
			vmo = item;
			firstCount = commonCount;
			}
			isNotarize = true;

			vmo = absoluteMatching.First();
			}
			else
			vmo = elbowMainVmos.First();
			}
			if (vmo != null)
			{
			input.MatchingMinorLoss = vmo.Coefficient;
			input.MatchingDbId = vmo.ID.ToString();
			input.MatchingMaterial = vmo.Material;
			input.MatchingModelType = vmo.Name;
			if (!isNotarize)
			{
			if (!input.MinorLoss.HasValue)
			{
			input.MatchingMinorLoss = vmo.MinorLoss;
			}
			if (input.DbId == null)
			{
			input.MatchingDbId = vmo.ID.ToString();
			}
			if (input.Material == null)
			{
			input.MatchingMaterial = vmo.Material;
			}
			if (input.ModelType == null)
			{
			input.MatchingModelType = vmo.Material;
			}
			if (!input.ElbowType.HasValue)
			{
			input.MatchingElbowType = (eElbowType?)(int)vmo.ElbowType;
			}
			if (!input.BendingAngle.HasValue)
			{
			input.MatchingBendingAngle = vmo.Angle;
			}
			}
			else
			{
			input.MatchingMinorLoss = vmo.MinorLoss;
			input.MatchingDbId = vmo.ID.ToString();
			input.MatchingMaterial = vmo.Material;
			input.MatchingModelType = vmo.Name;
			input.MatchingElbowType = (eElbowType?)(int)vmo.ElbowType;
			input.MatchingBendingAngle = vmo.Angle;
			}
			return true;
			}
			return false;
			}

			//三通匹配
			public static bool MatchingThreelink(ThreelinkMatchingViewModel input, List<Vmo.AdaptingManageVmo> adaptingManageVmos)
			public static bool MatchingThreelink(HydroThreelinkMatchingViewModel input, List<Vmo.AssetsThreelinkMainVmo> threelinkVmos)
			{
			Vmo.AdaptingManageVmo vmo = null;
			int firstCount = 0;
			//口径最小差值
			// 绝对匹配
			var absoluteMatch = adaptingManageVmos.Where(i =>
			((input.Caliber == null && i.Caliber == null) \|\| i.Caliber == input.Caliber) &&
			((input.Material == null && i.Material == "默认") \|\| i.Material == input.Material)).ToList();
			if (absoluteMatch.Any())
			bool isNotarize = false; //是否确定
			Vmo.AssetsThreelinkMainVmo vmo = null;
			if (threelinkVmos == null \|\| input == null \|\| threelinkVmos.Count == 0)
			{
			foreach (var range in absoluteMatch)
			return true;
			}
			var nameMatching = threelinkVmos.Where(x =>
			(x.KeyWord != null && x.KeyWord.Any(keyword => GetIntersect(keyword, input.ModelType) >= 1)) \|\|
			(x.KeyWord == null \|\| !x.KeyWord.Any()) && GetIntersect(x.Name, input.ModelType) >= 1
			) //先进行筛选,后进行从大到小排序
			.OrderByDescending(x =>
			(x.KeyWord != null && x.KeyWord.Any(keyword => GetIntersect(keyword, input.ModelType) >= 1)) \|\|
			(x.KeyWord == null \|\| !x.KeyWord.Any()) && GetIntersect(x.Name, input.ModelType) >= 1).ToList();

			if (nameMatching.Count > 1)
			{
			var absoluteMatching = nameMatching.Where(i =>
			((i.Caliber == null \|\| input.Caliber == null) \|\| Math.Abs(Convert.ToInt64(i.Caliber) - Convert.ToInt64(input.Caliber)) <= _caliberTolerance) && //直径约束
			i.Material == input.Material //材料约束
			).ToList();
			if (absoluteMatching.Count > 1)
			{
			int commonCount = GetIntersect(input.ModelType, range.Name);
			if (commonCount > firstCount)
			var defaultList = absoluteMatching.Where(x => x.Flags.Contains("默认值")).ToList();
			//取默认
			if (defaultList.Count > 0)
			{
			vmo = range;
			firstCount = commonCount;
			vmo = defaultList.First();
			}
			else if (defaultList.Count <= 0)
			{
			vmo = threelinkVmos.First();
			}
			}
			else if (absoluteMatching.Count == 1)
			{
			isNotarize = true;

			vmo = absoluteMatching.First();
			}
			else
			vmo = threelinkVmos.First();
			}
			else if (nameMatching.Count == 1)
			{
			isNotarize = true;

			vmo = nameMatching.First();
			}
			else
			{
			//区间匹配
			var rangeMatch = adaptingManageVmos.Where(item =>
			var absoluteMatching = threelinkVmos.Where(i =>
			((i.Caliber == null \|\| input.Caliber == null) \|\| Math.Abs(Convert.ToInt64(i.Caliber) - Convert.ToInt64(input.Caliber)) <= _caliberTolerance) && //直径约束
			i.Material == input.Material //材料约束
			).ToList();
			if (absoluteMatching.Count > 1)
			{
			if (item.Caliber != null && input.Caliber != null)
			var defaultList = absoluteMatching.Where(x => x.Flags.Contains("默认值")).ToList();
			//取默认
			if (defaultList.Count > 0)
			{
			return Math.Abs(Convert.ToInt64(item.Caliber - input.Caliber)) <= _caliberTolerance;
			vmo = defaultList.First();
			}
			else
			else if (defaultList.Count <= 0)
			{
			if (item.Caliber == null)
			{
			return true;
			}
			}
			return false;
			})
			.ToList();
			if (rangeMatch != null && rangeMatch.Count > 0)
			{
			var materialList = new List<Vmo.AdaptingManageVmo>();
			foreach (var range in rangeMatch)
			{
			//以材料为条件开始匹配
			if (range.Material == "默认")
			{
			materialList.Add(range);
			}
			else
			{
			int commonCount = GetIntersect(input.Material, range.Material);
			if (commonCount > firstCount)
			{
			materialList.Add(range);
			firstCount = commonCount;
			}
			}
			}
			//用已经筛选完成的列表中以名称筛选
			firstCount = 0;
			foreach (var material in materialList)
			{
			int commonCount = GetIntersect(input.ModelType, material.Name);
			if (commonCount > firstCount)
			{
			vmo = material;
			firstCount = commonCount;
			}
			vmo = threelinkVmos.First();
			}
			}
			}
			//口径和材料都没有匹配上,就用型号名匹配
			firstCount = 0;
			if (vmo == null)
			{
			foreach (var item in adaptingManageVmos)
			else if (absoluteMatching.Count == 1)
			{
			int commonCount = GetIntersect(input.ModelType, item.Name);
			if (commonCount > firstCount)
			{
			vmo = item;
			firstCount = commonCount;
			}
			isNotarize = true;

			vmo = absoluteMatching.First();
			}
			else
			vmo = threelinkVmos.First();
			}
			if (vmo != null)
			{
			input.MatchingMinorLoss = vmo.Coefficient;
			input.MatchingDbId = vmo.ID.ToString();
			input.MatchingMaterial = vmo.Material;
			input.MatchingModelType = vmo.Name;
			if (!isNotarize)
			{
			if (!input.MinorLoss.HasValue)
			input.MatchingMinorLoss = vmo.MinorLoss;
			if (input.DbId == null)
			input.MatchingDbId = vmo.ID.ToString();
			if (!input.RunningThroughLoss.HasValue)
			input.MatchingRunningThroughLoss = vmo.RunThroughMinorLoss;
			if (!input.MatchingBranchThroughLoss.HasValue)
			input.MatchingRunningThroughLoss = vmo.BranchThroughMinorLoss;
			}
			else
			{
			input.MatchingMinorLoss = vmo.MinorLoss;
			input.MatchingDbId = vmo.ID.ToString();
			input.MatchingMaterial = vmo.Material;
			input.MatchingModelType = vmo.Name;
			input.MatchingRunningThroughLoss = vmo.RunThroughMinorLoss;
			input.MatchingBranchThroughLoss = vmo.BranchThroughMinorLoss;
			}
			return true;
			}
			return false;
			}

			//四通匹配
			public static bool MatchingFourlink(FourlinkMatchingViewModel input, List<Vmo.AdaptingManageVmo> adaptingManageVmos)
			public static bool MatchingFourlink(HydroFourlinkMatchingViewModel input, List<Vmo.AssetsFourlinkMainVmo> fourLinkVmos)
			{
			Vmo.AdaptingManageVmo vmo = null;
			int firstCount = 0;
			//口径最小差值
			// 绝对匹配
			var absoluteMatch = adaptingManageVmos.Where(i =>
			((input.Caliber == null && i.Caliber == null) \|\| i.Caliber == input.Caliber) &&
			((input.Material == null && i.Material == "默认") \|\| i.Material == input.Material)).ToList();
			if (absoluteMatch.Any())
			bool isNotarize = false; //是否确定
			if (fourLinkVmos == null \|\| input == null \|\| fourLinkVmos.Count == 0)
			{
			foreach (var range in absoluteMatch)
			return true;
			}
			Vmo.AssetsFourlinkMainVmo vmo = null;
			var nameMatching = fourLinkVmos.Where(x =>
			(x.KeyWord != null && x.KeyWord.Any(keyword => GetIntersect(keyword, input.ModelType) >= 1)) \|\|
			(x.KeyWord == null \|\| !x.KeyWord.Any()) && GetIntersect(x.Name, input.ModelType) >= 1
			) //先进行筛选,后进行从大到小排序
			.OrderByDescending(x =>
			(x.KeyWord != null && x.KeyWord.Any(keyword => GetIntersect(keyword, input.ModelType) >= 1)) \|\|
			(x.KeyWord == null \|\| !x.KeyWord.Any()) && GetIntersect(x.Name, input.ModelType) >= 1).ToList();

			if (nameMatching.Count > 1)
			{
			var absoluteMatching = nameMatching.Where(i =>
			((i.Caliber == null \|\| input.Caliber == null) \|\| Math.Abs(Convert.ToInt64(i.Caliber) - Convert.ToInt64(input.Caliber)) <= _caliberTolerance) && //直径约束
			i.Material == input.Material //材料约束
			).ToList();
			if (absoluteMatching.Count > 1)
			{
			int commonCount = GetIntersect(input.ModelType, range.Name);
			if (commonCount > firstCount)
			var defaultList = absoluteMatching.Where(x => x.Flags.Contains("默认值")).ToList();
			//取默认
			if (defaultList.Count > 0)
			{
			vmo = range;
			firstCount = commonCount;
			vmo = defaultList.First();
			}
			else if (defaultList.Count <= 0)
			{
			vmo = fourLinkVmos.First();
			}
			}
			else if (absoluteMatching.Count == 1)
			{
			isNotarize = true;

			vmo = absoluteMatching.First();
			}
			else
			vmo = fourLinkVmos.First();
			}
			else if (nameMatching.Count == 1)
			{
			isNotarize = true;

			vmo = nameMatching.First();
			}
			else
			{
			//区间匹配
			var rangeMatch = adaptingManageVmos.Where(item =>
			var absoluteMatching = fourLinkVmos.Where(i =>
			((i.Caliber == null \|\| input.Caliber == null) \|\| Math.Abs(Convert.ToInt64(i.Caliber) - Convert.ToInt64(input.Caliber)) <= _caliberTolerance) && //直径约束
			i.Material == input.Material //材料约束
			).ToList();
			if (absoluteMatching.Count > 1)
			{
			if (item.Caliber != null && input.Caliber != null)
			var defaultList = absoluteMatching.Where(x => x.Flags.Contains("默认值")).ToList();
			//取默认
			if (defaultList.Count > 0)
			{
			return Math.Abs(Convert.ToInt64(item.Caliber - input.Caliber)) <= _caliberTolerance;
			vmo = defaultList.First();
			}
			else
			else if (defaultList.Count <= 0)
			{
			if (item.Caliber == null)
			{
			return true;
			}
			}
			return false;
			})
			.ToList();
			if (rangeMatch != null && rangeMatch.Count > 0)
			{
			var materialList = new List<Vmo.AdaptingManageVmo>();
			foreach (var range in rangeMatch)
			{
			//以材料为条件开始匹配
			if (range.Material == "默认")
			{
			materialList.Add(range);
			}
			else
			{
			int commonCount = GetIntersect(input.Material, range.Material);
			if (commonCount > firstCount)
			{
			materialList.Add(range);
			firstCount = commonCount;
			}
			}
			}
			//用已经筛选完成的列表中以名称筛选
			firstCount = 0;
			foreach (var material in materialList)
			{
			int commonCount = GetIntersect(input.ModelType, material.Name);
			if (commonCount > firstCount)
			{
			vmo = material;
			firstCount = commonCount;
			}
			vmo = fourLinkVmos.First();
			}
			}
			}
			//口径和材料都没有匹配上,就用型号名匹配
			firstCount = 0;
			if (vmo == null)
			{
			foreach (var item in adaptingManageVmos)
			else if (absoluteMatching.Count == 1)
			{
			int commonCount = GetIntersect(input.ModelType, item.Name);
			if (commonCount > firstCount)
			{
			vmo = item;
			firstCount = commonCount;
			}
			isNotarize = true;

			vmo = absoluteMatching.First();
			}
			else
			vmo = fourLinkVmos.First();
			}
			if (vmo != null)
			{
			input.MatchingMinorLoss = vmo.Coefficient;
			input.MatchingDbId = vmo.ID.ToString();
			input.MatchingMaterial = vmo.Material;
			input.MatchingModelType = vmo.Name;
			if (!isNotarize)
			{
			if (!input.MinorLoss.HasValue)
			input.MatchingMinorLoss = vmo.MinorLoss;
			if (input.DbId == null)
			input.MatchingDbId = vmo.ID.ToString();
			if (input.Material == null)
			input.MatchingMaterial = vmo.Material;
			if (input.ModelType == null)
			input.MatchingModelType = vmo.Name;
			}
			else
			{
			input.MatchingMinorLoss = vmo.MinorLoss;
			input.MatchingDbId = vmo.ID.ToString();
			input.MatchingMaterial = vmo.Material;
			input.MatchingModelType = vmo.Name;
			}
			return true;
			}
			return false;
			}

			/*
			//返回两个字符串之间相同的字符个数
			private static int GetIntersect(string baseString, string compareString)
			//喷头匹配
			public static bool MatchingSprinkler(HydroNozzleMatchingViewModel input, List<Vmo.AssetsSprinklerMainVmo> sprinklerVmos)
			{
			bool isNotarize = false; //是否确定
			if (sprinklerVmos == null \|\| input == null \|\| sprinklerVmos.Count == 0)
			{
			return true;
			}
			Vmo.AssetsSprinklerMainVmo vmo = null;
			var nameMatching = sprinklerVmos.Where(x =>
			(x.KeyWord != null && x.KeyWord.Any(keyword => GetIntersect(keyword, input.ModelType) >= 1)) \|\|
			(x.KeyWord == null \|\| !x.KeyWord.Any()) && GetIntersect(x.Name, input.ModelType) >= 1
			) //先进行筛选,后进行从大到小排序
			.OrderByDescending(x =>
			(x.KeyWord != null && x.KeyWord.Any(keyword => GetIntersect(keyword, input.ModelType) >= 1)) \|\|
			(x.KeyWord == null \|\| !x.KeyWord.Any()) && GetIntersect(x.Name, input.ModelType) >= 1).ToList();

			if (nameMatching.Count > 1)
			{
			var absoluteMatching = nameMatching.Where(i =>
			((i.Caliber == null \|\| input.Caliber == null) \|\| Math.Abs(Convert.ToInt64(i.Caliber) - Convert.ToInt64(input.Caliber)) <= _caliberTolerance) && //直径约束
			i.Material == input.Material //材料约束
			).ToList();
			if (absoluteMatching.Count > 1)
			{
			// 将字符串转换为字符集合
			if (baseString == string.Empty \|\| baseString == null \|\| compareString == string.Empty \|\| compareString == null)
			var defaultList = absoluteMatching.Where(x => x.Flags.Contains("默认值")).ToList();
			//取默认
			if (defaultList.Count > 0)
			{
			return 0;
			vmo = defaultList.First();
			}
			HashSet<char> baseChars = new HashSet<char>(baseString);
			HashSet<char> comparisonChars = new HashSet<char>(compareString);
			// 计算两个集合的交集
			int commonCount = baseChars.Intersect(comparisonChars).Count();
			return commonCount;
			}*/
			else if (defaultList.Count <= 0)
			{
			vmo = sprinklerVmos.First();
			}
			}
			else if (absoluteMatching.Count == 1)
			{
			isNotarize = true;

			vmo = absoluteMatching.First();
			}
			else
			vmo = sprinklerVmos.First();
			}
			else if (nameMatching.Count == 1)
			{
			isNotarize = true;

			vmo = nameMatching.First();
			}
			else
			{
			var absoluteMatching = sprinklerVmos.Where(i =>
			((i.Caliber == null \|\| input.Caliber == null) \|\| Math.Abs(Convert.ToInt64(i.Caliber) - Convert.ToInt64(input.Caliber)) <= _caliberTolerance) && //直径约束
			i.Material == input.Material //材料约束
			).ToList();
			if (absoluteMatching.Count > 1)
			{
			var defaultList = absoluteMatching.Where(x => x.Flags.Contains("默认值")).ToList();
			//取默认
			if (defaultList.Count > 0)
			{
			vmo = defaultList.First();
			}
			else if (defaultList.Count <= 0)
			{
			vmo = sprinklerVmos.First();
			}
			}
			else if (absoluteMatching.Count == 1)
			{
			isNotarize = true;

			vmo = absoluteMatching.First();
			}
			else
			vmo = sprinklerVmos.First();
			}
			if (vmo != null)
			{
			if (!isNotarize)
			{
			if (!input.MinorLoss.HasValue)
			input.MatchingMinorLoss = vmo.MinorLoss;
			if (input.DbId == null)
			input.MatchingDbId = vmo.ID.ToString();
			if (input.Material == null)
			input.MatchingMaterial = vmo.Material;
			if (input.ModelType == null)
			input.MatchingModelType = vmo.Name;
			}
			else
			{
			input.MatchingMinorLoss = vmo.MinorLoss;
			input.MatchingDbId = vmo.ID.ToString();
			input.MatchingMaterial = vmo.Material;
			input.MatchingModelType = vmo.Name;
			}
			return true;
			}
			return false;
			}

			//换热器匹配
			public static bool MatchingExchanger(HydroExchangerMatchingViewModel input, List<Vmo.AssetsExchangerMainVmo> exchangerVmos)
			{
			bool isNotarize = false; //是否确定

			if (exchangerVmos == null \|\| input == null \|\| exchangerVmos.Count == 0)
			{
			return true;
			}
			Vmo.AssetsExchangerMainVmo vmo = null;
			var nameMatching = exchangerVmos.Where(x =>
			(x.KeyWord != null && x.KeyWord.Any(keyword => GetIntersect(keyword, input.ModelType) >= 1)) \|\|
			(x.KeyWord == null \|\| !x.KeyWord.Any()) && GetIntersect(x.Name, input.ModelType) >= 1
			) //先进行筛选,后进行从大到小排序
			.OrderByDescending(x =>
			(x.KeyWord != null && x.KeyWord.Any(keyword => GetIntersect(keyword, input.ModelType) >= 1)) \|\|
			(x.KeyWord == null \|\| !x.KeyWord.Any()) && GetIntersect(x.Name, input.ModelType) >= 1).ToList();

			if (nameMatching.Count > 1)
			{
			var absoluteMatching = nameMatching.Where(i =>
			i.Material == input.Material //材料约束
			).ToList();
			if (absoluteMatching.Count > 1)
			{
			var defaultList = absoluteMatching.Where(x => x.Flags.Contains("默认值")).ToList();
			//取默认
			if (defaultList.Count > 0)
			{
			vmo = defaultList.First();
			}
			else if (defaultList.Count <= 0)
			{
			vmo = exchangerVmos.First();
			}
			}
			else if (absoluteMatching.Count == 1)
			{
			isNotarize = true;

			vmo = absoluteMatching.First();
			}
			else
			vmo = exchangerVmos.First();
			}
			else if (nameMatching.Count == 1)
			{
			isNotarize = true;

			vmo = nameMatching.First();
			}
			else
			{
			var absoluteMatching = exchangerVmos.Where(i =>
			i.Material == input.Material //材料约束
			).ToList();
			if (absoluteMatching.Count > 1)
			{
			var defaultList = absoluteMatching.Where(x => x.Flags.Contains("默认值")).ToList();
			//取默认
			if (defaultList.Count > 0)
			{
			vmo = defaultList.First();
			}
			else if (defaultList.Count <= 0)
			{
			vmo = exchangerVmos.First();
			}
			}
			else if (absoluteMatching.Count == 1)
			{
			isNotarize = true;

			vmo = absoluteMatching.First();
			}
			else
			vmo = exchangerVmos.First();
			}
			if (vmo != null)
			{
			if (!isNotarize)
			{
			if (input.MinorLoss < 0)
			input.MatchingMinorLoss = vmo.MinorLoss;
			if (input.DbId == null)
			input.MatchingDbId = vmo.ID.ToString();
			if (input.Material == null)
			input.MatchingMaterial = vmo.Material;
			if (input.ModelType == null)
			input.MatchingModelType = vmo.Name;
			if (input.CurveDbId == null)
			{
			var curveList = Task.Run(async () => await new BLL.AssetsExchangerCoefficient().GetByMainID(vmo.ID)).Result;
			if (curveList != null && curveList.Count > 0)
			{
			input.MatchingCurveDbId = curveList.First().ID.ToString();
			var pt_list = Yw.JsonHelper.Json2Object<List<HydroCurvePointViewModel>>(curveList.First().MinorLossCurve);
			input.MatchingCurveQL = pt_list;
			}
			}
			}
			else
			{
			input.MatchingMinorLoss = vmo.MinorLoss;
			input.MatchingDbId = vmo.ID.ToString();
			input.MatchingMaterial = vmo.Material;
			input.MatchingModelType = vmo.Name;
			var curveList = Task.Run(async () => await new BLL.AssetsExchangerCoefficient().GetByMainID(vmo.ID)).Result;
			if (curveList != null && curveList.Count > 0)
			{
			input.MatchingCurveDbId = curveList.First().ID.ToString();
			var pt_list = Yw.JsonHelper.Json2Object<List<HydroCurvePointViewModel>>(curveList.First().MinorLossCurve);
			input.MatchingCurveQL = pt_list;
			}
			}
			return true;
			}
			return false;
			}

			//空压机匹配
			public static bool MatchingCompressor(HydroCompressorMatchingViewModel input, List<Vmo.AssetsCompressorMainVmo> compressorVmos)
			{
			bool isNotarize = false; //是否确定
			if (compressorVmos == null \|\| input == null \|\| compressorVmos.Count == 0)
			{
			return true;
			}
			Vmo.AssetsCompressorMainVmo vmo = null;
			var nameMatching = compressorVmos.Where(x =>
			(x.KeyWord != null && x.KeyWord.Any(keyword => GetIntersect(keyword, input.ModelType) >= 1)) \|\|
			(x.KeyWord == null \|\| !x.KeyWord.Any()) && GetIntersect(x.Name, input.ModelType) >= 1
			) //先进行筛选,后进行从大到小排序
			.OrderByDescending(x =>
			(x.KeyWord != null && x.KeyWord.Any(keyword => GetIntersect(keyword, input.ModelType) >= 1)) \|\|
			(x.KeyWord == null \|\| !x.KeyWord.Any()) && GetIntersect(x.Name, input.ModelType) >= 1).ToList();

			if (nameMatching.Count > 1)
			{
			var absoluteMatching = nameMatching.Where(i =>
			i.Material == input.Material //材料约束
			).ToList();
			if (absoluteMatching.Count > 1)
			{
			var defaultList = absoluteMatching.Where(x => x.Flags.Contains("默认值")).ToList();
			//取默认
			if (defaultList.Count > 0)
			{
			vmo = defaultList.First();
			}
			else if (defaultList.Count <= 0)
			{
			vmo = compressorVmos.First();
			}
			}
			else if (absoluteMatching.Count == 1)
			{
			isNotarize = true;

			vmo = absoluteMatching.First();
			}
			else
			vmo = compressorVmos.First();
			}
			else if (nameMatching.Count == 1)
			{
			isNotarize = true;

			vmo = nameMatching.First();
			}
			else
			{
			var absoluteMatching = compressorVmos.Where(i =>
			i.Material == input.Material //材料约束
			).ToList();
			if (absoluteMatching.Count > 1)
			{
			var defaultList = absoluteMatching.Where(x => x.Flags.Contains("默认值")).ToList();
			//取默认
			if (defaultList.Count > 0)
			{
			vmo = defaultList.First();
			}
			else if (defaultList.Count <= 0)
			{
			vmo = compressorVmos.First();
			}
			}
			else if (absoluteMatching.Count == 1)
			{
			isNotarize = true;

			vmo = absoluteMatching.First();
			}
			else
			vmo = compressorVmos.First();
			}
			if (vmo != null)
			{
			if (!isNotarize)
			{
			if (input.MinorLoss < 0)
			input.MatchingMinorLoss = vmo.MinorLoss;
			if (input.DbId == null)
			input.MatchingDbId = vmo.ID.ToString();
			if (input.Material == null)
			input.MatchingMaterial = vmo.Material;
			if (input.ModelType == null)
			input.MatchingModelType = vmo.Name;
			if (input.CurveDbId == null)
			{
			var curveList = Task.Run(async () => await new BLL.AssetsCompressorCoefficient().GetByMainID(vmo.ID)).Result;
			if (curveList != null && curveList.Count > 0)
			{
			input.MatchingCurveDbId = curveList.First().ID.ToString();
			var pt_list = Yw.JsonHelper.Json2Object<List<HydroCurvePointViewModel>>(curveList.First().MinorLossCurve);
			input.MatchingCurveQL = pt_list;
			}
			}
			}
			else
			{
			input.MatchingMinorLoss = vmo.MinorLoss;
			input.MatchingDbId = vmo.ID.ToString();
			input.MatchingMaterial = vmo.Material;
			input.MatchingModelType = vmo.Name;
			var curveList = Task.Run(async () => await new BLL.AssetsCompressorCoefficient().GetByMainID(vmo.ID)).Result;
			if (curveList != null && curveList.Count > 0)
			{
			input.MatchingCurveDbId = curveList.First().ID.ToString();
			var pt_list = Yw.JsonHelper.Json2Object<List<HydroCurvePointViewModel>>(curveList.First().MinorLossCurve);
			input.MatchingCurveQL = pt_list;
			}
			}
			return true;
			}
			return false;
			}

			//闷头匹配
			public static bool MatchingBlunthead(HydroBluntheadMatchingViewModel input, List<Vmo.AssetsBluntheadMainVmo> bluntheadVmos)
			{
			bool isNotarize = false; //是否确定
			if (bluntheadVmos == null \|\| input == null \|\| bluntheadVmos.Count == 0)
			{
			return true;
			}
			Vmo.AssetsBluntheadMainVmo vmo = null;
			var nameMatching = bluntheadVmos.Where(x =>
			(x.KeyWord != null && x.KeyWord.Any(keyword => GetIntersect(keyword, input.ModelType) >= 1)) \|\|
			(x.KeyWord == null \|\| !x.KeyWord.Any()) && GetIntersect(x.Name, input.ModelType) >= 1
			) //先进行筛选,后进行从大到小排序
			.OrderByDescending(x =>
			(x.KeyWord != null && x.KeyWord.Any(keyword => GetIntersect(keyword, input.ModelType) >= 1)) \|\|
			(x.KeyWord == null \|\| !x.KeyWord.Any()) && GetIntersect(x.Name, input.ModelType) >= 1).ToList();

			if (nameMatching.Count > 1)
			{
			var absoluteMatching = nameMatching.Where(i =>
			((i.Caliber == null \|\| input.Caliber == null) \|\| Math.Abs(Convert.ToInt64(i.Caliber) - Convert.ToInt64(input.Caliber)) <= _caliberTolerance) && //直径约束
			i.Material == input.Material //材料约束
			).ToList();
			if (absoluteMatching.Count > 1)
			{
			var defaultList = absoluteMatching.Where(x => x.Flags.Contains("默认值")).ToList();
			//取默认
			if (defaultList.Count > 0)
			{
			vmo = defaultList.First();
			}
			else if (defaultList.Count <= 0)
			{
			vmo = bluntheadVmos.First();
			}
			}
			else if (absoluteMatching.Count == 1)
			{
			isNotarize = true;

			vmo = absoluteMatching.First();
			}
			else
			vmo = bluntheadVmos.First();
			}
			else if (nameMatching.Count == 1)
			{
			isNotarize = true;

			vmo = nameMatching.First();
			}
			else
			{
			var absoluteMatching = bluntheadVmos.Where(i =>
			((i.Caliber == null \|\| input.Caliber == null) \|\| Math.Abs(Convert.ToInt64(i.Caliber) - Convert.ToInt64(input.Caliber)) <= _caliberTolerance) && //直径约束
			i.Material == input.Material //材料约束
			).ToList();
			if (absoluteMatching.Count > 1)
			{
			var defaultList = absoluteMatching.Where(x => x.Flags.Contains("默认值")).ToList();
			//取默认
			if (defaultList.Count > 0)
			{
			vmo = defaultList.First();
			}
			else if (defaultList.Count <= 0)
			{
			vmo = bluntheadVmos.First();
			}
			}
			else if (absoluteMatching.Count == 1)
			{
			isNotarize = true;

			vmo = absoluteMatching.First();
			}
			else
			vmo = bluntheadVmos.First();
			}
			if (vmo != null)
			{
			if (!isNotarize)
			{
			if (input.MinorLoss < 0)
			input.MatchingMinorLoss = vmo.MinorLoss;
			if (input.DbId == null)
			input.MatchingDbId = vmo.ID.ToString();
			if (input.Material == null)
			input.MatchingMaterial = vmo.Material;
			if (input.ModelType == null)
			input.MatchingModelType = vmo.Name;
			}
			else
			{
			input.MatchingMinorLoss = vmo.MinorLoss;
			input.MatchingDbId = vmo.ID.ToString();
			input.MatchingMaterial = vmo.Material;
			input.MatchingModelType = vmo.Name;
			}
			return true;
			}
			return false;
			}

			//水池匹配
			public static bool MatchingTank(HydroTankMatchingViewModel input, List<Vmo.AssetsTankMainVmo> tankVmos)
			{
			bool isNotarize = false; //是否确定
			if (tankVmos == null \|\| input == null \|\| tankVmos.Count == 0)
			{
			return true;
			}
			Vmo.AssetsTankMainVmo vmo = null;
			var nameMatching = tankVmos.Where(x =>
			(x.KeyWord != null && x.KeyWord.Any(keyword => GetIntersect(keyword, input.ModelType) >= 1)) \|\|
			(x.KeyWord == null \|\| !x.KeyWord.Any()) && GetIntersect(x.Name, input.ModelType) >= 1
			) //先进行筛选,后进行从大到小排序
			.OrderByDescending(x =>
			(x.KeyWord != null && x.KeyWord.Any(keyword => GetIntersect(keyword, input.ModelType) >= 1)) \|\|
			(x.KeyWord == null \|\| !x.KeyWord.Any()) && GetIntersect(x.Name, input.ModelType) >= 1).ToList();

			if (nameMatching.Count > 1)
			{
			var defaultList = nameMatching.Where(x => x.Flags.Contains("默认值")).ToList();
			//取默认
			if (defaultList.Count > 0)
			{
			vmo = tankVmos.First();
			}
			else if (defaultList.Count <= 0)
			{
			vmo = tankVmos.First();
			}
			}
			else if (nameMatching.Count == 1)
			{
			isNotarize = true;

			vmo = nameMatching.First();
			}
			else
			vmo = tankVmos.First();
			if (vmo != null)
			{
			if (!isNotarize)
			{
			if (input.DbId == null)
			input.MatchingDbId = vmo.ID.ToString();
			if (input.ModelType == null)
			input.MatchingModelType = vmo.Name;
			if (input.DN < 0)
			input.MatchingDN = vmo.DN;
			if (input.MinLevel < 0)
			input.MatchingMinLevel = vmo.MinLevel;
			if (input.CurveDbId == null)
			{
			var curveList = Task.Run(async () => await new BLL.AssetsTankCoefficient().GetByMainID(vmo.ID)).Result;
			if (curveList != null && curveList.Count > 0)
			{
			input.MatchingCurveDbId = curveList.First().ID.ToString();
			var pt_list = Yw.JsonHelper.Json2Object<List<HydroCurvePointViewModel>>(curveList.First().VolCurve);
			input.MatchingVolCurve = pt_list;
			}
			}
			}
			else
			{
			input.MatchingDbId = vmo.ID.ToString();
			input.MatchingModelType = vmo.Name;
			input.MatchingDN = vmo.DN;
			input.MatchingMinLevel = vmo.MinLevel;
			input.MatchingOverFlow = vmo.OverFlow;
			var curveList = Task.Run(async () => await new BLL.AssetsTankCoefficient().GetByMainID(vmo.ID)).Result;
			if (curveList != null && curveList.Count > 0)
			{
			input.MatchingCurveDbId = curveList.First().ID.ToString();
			var pt_list = Yw.JsonHelper.Json2Object<List<HydroCurvePointViewModel>>(curveList.First().VolCurve);
			input.MatchingVolCurve = pt_list;
			}
			}
			return true;
			}
			return false;
			}

			//水表匹配
			public static bool MatchingMeter(HydroMeterMatchingViewModel input, List<Vmo.AssetsMeterMainVmo> MeterMainVmos)
			{
			bool isNotarize = false; //是否确定
			Vmo.AssetsMeterMainVmo vmo = null;
			if (MeterMainVmos == null \|\| input == null \|\| MeterMainVmos.Count == 0)
			{
			return true;
			}
			var nameMatching = MeterMainVmos.Where(x =>
			(x.KeyWord != null && x.KeyWord.Any(keyword => GetIntersect(keyword, input.ModelType) >= 1)) \|\|
			(x.KeyWord == null \|\| !x.KeyWord.Any()) && GetIntersect(x.Name, input.ModelType) >= 1
			) //先进行筛选,后进行从大到小排序
			.OrderByDescending(x =>
			(x.KeyWord != null && x.KeyWord.Any(keyword => GetIntersect(keyword, input.ModelType) >= 1)) \|\|
			(x.KeyWord == null \|\| !x.KeyWord.Any()) && GetIntersect(x.Name, input.ModelType) >= 1).ToList();
			if (nameMatching.Count > 1)
			{
			var defaultList = nameMatching.Where(x => x.Flags.Contains("默认值")).ToList();
			//取默认
			if (defaultList.Count > 0)
			{
			vmo = defaultList.First();
			}
			else if (defaultList.Count <= 0)
			{
			vmo = MeterMainVmos.First();
			}
			}
			else if (nameMatching.Count == 1)
			{
			isNotarize = true;

			vmo = nameMatching.First();
			}
			else
			vmo = MeterMainVmos.First();

			if (vmo != null)
			{
			if (!isNotarize)
			{
			if (input.MinorLoss < 0)
			input.MatchingMinorLoss = vmo.MinorLoss;
			if (input.DbId == null)
			input.MatchingDbId = vmo.ID.ToString();
			if (input.ModelType == null)
			input.MatchingModelType = vmo.Name;
			}
			else
			{
			input.MatchingMinorLoss = vmo.MinorLoss;
			input.MatchingDbId = vmo.ID.ToString();
			input.MatchingModelType = vmo.Name;
			}
			return true;
			}
			return false;
			}

			//流量计匹配
			public static bool MatchingFlowmeter(HydroFlowmeterMatchingViewModel input, List<Vmo.AssetsFlowmeterMainVmo> FlowmeterMainVmos)
			{
			bool isNotarize = false; //是否确定
			if (FlowmeterMainVmos == null \|\| input == null \|\| FlowmeterMainVmos.Count == 0)
			{
			return true;
			}
			Vmo.AssetsFlowmeterMainVmo vmo = null;
			var nameMatching = FlowmeterMainVmos.Where(x =>
			(x.KeyWord != null && x.KeyWord.Any(keyword => GetIntersect(keyword, input.ModelType) >= 1)) \|\|
			(x.KeyWord == null \|\| !x.KeyWord.Any()) && GetIntersect(x.Name, input.ModelType) >= 1
			) //先进行筛选,后进行从大到小排序
			.OrderByDescending(x =>
			(x.KeyWord != null && x.KeyWord.Any(keyword => GetIntersect(keyword, input.ModelType) >= 1)) \|\|
			(x.KeyWord == null \|\| !x.KeyWord.Any()) && GetIntersect(x.Name, input.ModelType) >= 1).ToList();

			if (nameMatching.Count > 1)
			{
			var defaultList = nameMatching.Where(x => x.Flags.Contains("默认值")).ToList();
			//取默认
			if (defaultList.Count > 0)
			{
			vmo = defaultList.First();
			}
			else if (defaultList.Count <= 0)
			{
			vmo = FlowmeterMainVmos.First();
			}
			}
			else if (nameMatching.Count == 1)
			{
			isNotarize = true;

			vmo = nameMatching.First();
			}
			else
			{
			vmo = FlowmeterMainVmos.First();
			}
			if (vmo != null)
			{
			if (!isNotarize)
			{
			if (input.MinorLoss < 0)
			input.MatchingMinorLoss = vmo.MinorLoss;
			if (input.DbId == null)
			input.MatchingDbId = vmo.ID.ToString();
			if (input.ModelType == null)
			input.MatchingModelType = vmo.Name;
			}
			else
			{
			input.MatchingMinorLoss = vmo.MinorLoss;
			input.MatchingDbId = vmo.ID.ToString();
			input.MatchingModelType = vmo.Name;
			}
			return true;
			}
			return false;
			}

			//消火栓匹配
			public static bool MatchingHydrant(HydroHydrantMatchingViewModel input, List<Vmo.AssetsHydrantMainVmo> hydrantVmos)
			{
			bool isNotarize = false; //是否确定
			if (hydrantVmos == null \|\| input == null \|\| hydrantVmos.Count == 0)
			{
			return true;
			}
			Vmo.AssetsHydrantMainVmo vmo = null;
			var nameMatching = hydrantVmos.Where(x =>
			(x.KeyWord != null && x.KeyWord.Any(keyword => GetIntersect(keyword, input.ModelType) >= 1)) \|\|
			(x.KeyWord == null \|\| !x.KeyWord.Any()) && GetIntersect(x.Name, input.ModelType) >= 1
			) //先进行筛选,后进行从大到小排序
			.OrderByDescending(x =>
			(x.KeyWord != null && x.KeyWord.Any(keyword => GetIntersect(keyword, input.ModelType) >= 1)) \|\|
			(x.KeyWord == null \|\| !x.KeyWord.Any()) && GetIntersect(x.Name, input.ModelType) >= 1).ToList();

			if (nameMatching.Count > 1)
			{
			var absoluteMatching = nameMatching.Where(i =>
			((i.Caliber == null \|\| input.Caliber == null) \|\| Math.Abs(Convert.ToInt64(i.Caliber) - Convert.ToInt64(input.Caliber)) <= _caliberTolerance) && //直径约束
			i.Material == input.Material //材料约束
			).ToList();
			if (absoluteMatching.Count > 1)
			{
			var defaultList = absoluteMatching.Where(x => x.Flags.Contains("默认值")).ToList();
			//取默认
			if (defaultList.Count > 0)
			{
			vmo = defaultList.First();
			}
			else if (defaultList.Count <= 0)
			{
			vmo = hydrantVmos.First();
			}
			}
			else if (absoluteMatching.Count == 1)
			{
			isNotarize = true;

			vmo = absoluteMatching.First();
			}
			else
			vmo = hydrantVmos.First();
			}
			else if (nameMatching.Count == 1)
			{
			vmo = nameMatching.First();
			}
			else
			{
			var absoluteMatching = hydrantVmos.Where(i =>
			((i.Caliber == null \|\| input.Caliber == null) \|\| Math.Abs(Convert.ToInt64(i.Caliber) - Convert.ToInt64(input.Caliber)) <= _caliberTolerance) && //直径约束
			i.Material == input.Material //材料约束
			).ToList();
			if (absoluteMatching.Count > 1)
			{
			var defaultList = absoluteMatching.Where(x => x.Flags.Contains("默认值")).ToList();
			//取默认
			if (defaultList.Count > 0)
			{
			vmo = defaultList.First();
			}
			else if (defaultList.Count <= 0)
			{
			vmo = hydrantVmos.First();
			}
			}
			else if (absoluteMatching.Count == 1)
			{
			isNotarize = true;

			vmo = absoluteMatching.First();
			}
			else
			vmo = hydrantVmos.First();
			}
			if (vmo != null)
			{
			if (!isNotarize)
			{
			if (input.MinorLoss < 0)
			input.MatchingMinorLoss = vmo.MinorLoss;
			if (input.DbId == null)
			input.MatchingDbId = vmo.ID.ToString();
			if (input.ModelType == null)
			input.MatchingModelType = vmo.Name;
			}
			else
			{
			input.MatchingMinorLoss = vmo.MinorLoss;
			input.MatchingDbId = vmo.ID.ToString();
			input.MatchingMaterial = vmo.Material;
			input.MatchingModelType = vmo.Name;
			}
			return true;
			}
			return false;
			}

			//压力表匹配
			public static bool MatchingPressmeter(HydroPressmeterMatchingViewModel input, List<Vmo.AssetsPressmeterMainVmo> pressmeterVmos)
			{
			bool isNotarize = false; //是否确定
			if (pressmeterVmos == null \|\| input == null \|\| pressmeterVmos.Count == 0)
			{
			return true;
			}
			Vmo.AssetsPressmeterMainVmo vmo = null;
			var nameMatching = pressmeterVmos.Where(x =>
			(x.KeyWord != null && x.KeyWord.Any(keyword => GetIntersect(keyword, input.ModelType) >= 1)) \|\|
			(x.KeyWord == null \|\| !x.KeyWord.Any()) && GetIntersect(x.Name, input.ModelType) >= 1
			) //先进行筛选,后进行从大到小排序
			.OrderByDescending(x =>
			(x.KeyWord != null && x.KeyWord.Any(keyword => GetIntersect(keyword, input.ModelType) >= 1)) \|\|
			(x.KeyWord == null \|\| !x.KeyWord.Any()) && GetIntersect(x.Name, input.ModelType) >= 1).ToList();

			if (nameMatching.Count > 1)
			{
			var defaultList = nameMatching.Where(x => x.Flags.Contains("默认值")).ToList();
			//取默认
			if (defaultList.Count > 0)
			{
			vmo = pressmeterVmos.First();
			}
			else if (defaultList.Count <= 0)
			{
			vmo = pressmeterVmos.First();
			}
			}
			else if (nameMatching.Count == 1)
			{
			isNotarize = true;

			vmo = nameMatching.First();
			}
			else
			{
			vmo = pressmeterVmos.First();
			}
			if (vmo != null)
			{
			if (!isNotarize)
			{
			if (input.MinorLoss < 0)
			input.MatchingMinorLoss = vmo.MinorLoss;
			if (input.DbId == null)
			input.MatchingDbId = vmo.ID.ToString();
			if (input.ModelType == null)
			input.MatchingModelType = vmo.Name;
			}
			else
			{
			input.MatchingMinorLoss = vmo.MinorLoss;
			input.MatchingDbId = vmo.ID.ToString();
			input.MatchingModelType = vmo.Name;
			}
			return true;
			}
			return false;
			}

			//过渡件匹配
			public static bool MatchingTranslation(HydroTranslationMatchingViewModel input, List<Vmo.AssetsTranslationMainVmo> translationVmos)
			{
			bool isNotarize = false; //是否确定

			if (translationVmos == null \|\| input == null \|\| translationVmos.Count == 0)
			{
			return true;
			}
			Vmo.AssetsTranslationMainVmo vmo = null;
			var nameMatching = translationVmos.Where(x =>
			(x.KeyWord != null && x.KeyWord.Any(keyword => GetIntersect(keyword, input.ModelType) >= 1)) \|\|
			(x.KeyWord == null \|\| !x.KeyWord.Any()) && GetIntersect(x.Name, input.ModelType) >= 1
			) //先进行筛选,后进行从大到小排序
			.OrderByDescending(x =>
			(x.KeyWord != null && x.KeyWord.Any(keyword => GetIntersect(keyword, input.ModelType) >= 1)) \|\|
			(x.KeyWord == null \|\| !x.KeyWord.Any()) && GetIntersect(x.Name, input.ModelType) >= 1).ToList();

			if (nameMatching.Count > 1)
			{
			var absoluteMatching = nameMatching.Where(i =>
			i.Material == input.Material //材料约束
			).ToList();
			if (absoluteMatching.Count > 1)
			{
			var defaultList = absoluteMatching.Where(x => x.Flags.Contains("默认值")).ToList();
			//取默认
			if (defaultList.Count > 0)
			{
			vmo = defaultList.First();
			}
			else if (defaultList.Count <= 0)
			{
			vmo = translationVmos.First();
			}
			}
			else if (absoluteMatching.Count == 1)
			{
			isNotarize = true;

			vmo = absoluteMatching.First();
			}
			else
			vmo = translationVmos.First();
			}
			else if (nameMatching.Count == 1)
			{
			isNotarize = true;

			vmo = nameMatching.First();
			}
			else
			{
			var absoluteMatching = translationVmos.Where(i =>
			i.Material == input.Material //材料约束
			).ToList();
			if (absoluteMatching.Count > 1)
			{
			var defaultList = absoluteMatching.Where(x => x.Flags.Contains("默认值")).ToList();
			//取默认
			if (defaultList.Count > 0)
			{
			vmo = defaultList.First();
			}
			else if (defaultList.Count <= 0)
			{
			vmo = translationVmos.First();
			}
			}
			else if (absoluteMatching.Count == 1)
			{
			isNotarize = true;

			vmo = absoluteMatching.First();
			}
			else
			vmo = translationVmos.First();
			}
			if (vmo != null)
			{
			if (!isNotarize)
			{
			if (input.MinorLoss < 0)
			input.MatchingMinorLoss = vmo.MinorLoss;
			if (input.DbId == null)
			input.MatchingDbId = vmo.ID.ToString();
			if (input.ModelType == null)
			input.MatchingModelType = vmo.Name;
			if (input.Roughness < 0)
			input.MatchingRoughness = vmo.Roughness;
			if (input.EndDiameter < 0)
			input.MatchingEndDiameter = vmo.EndDiameter;
			if (input.StartDiameter < 0)
			input.MatchingStartDiameter = vmo.StartDiameter;
			if (input.Diameter < 0)
			input.MatchingDiameter = vmo.Diameter;
			}
			else
			{
			input.MatchingMinorLoss = vmo.MinorLoss;
			input.MatchingDbId = vmo.ID.ToString();
			input.MatchingMaterial = vmo.Material;
			input.MatchingModelType = vmo.Name;
			input.MatchingDiameter = vmo.Diameter;
			input.MatchingEndDiameter = vmo.EndDiameter;
			input.MatchingStartDiameter = vmo.StartDiameter;
			input.MatchingRoughness = vmo.Roughness;
			}
			return true;
			}
			return false;
			}

			/// <summary>
			/// 获取两个字符串的所有交集
			/// </summary>
			/// <param name="str1"></param>
			/// <param name="str2"></param>
			/// <returns></returns>
			public static int GetIntersect(string str1, string str2)
			{
			if (str1 == null \|\| str2 == null) return 0;

			return string.Join("", str1.Intersect(str2)).Count();
			}
			}