HStation/XHS.V1.0.git

			@@ -2,6 +2,7 @@
			using HStation.WinFrmUI.PhartRelation;
			using HStation.WinFrmUI.Xhs;
			using Yw.Model;
			using Yw.WinFrmUI.HydroW3d;

			namespace HStation.WinFrmUI
			{
			@@ -24,7 +25,7 @@
			this.hydroVisualPropertyCtrl1.FlowEffectPropertyValueChangedEvent += HydroVisualPropertyCtrl1_FlowEffectPropertyValueChangedEvent;
			}

			#region 事件集
			#region 事件集合

			/// <summary>
			/// 构件查看事件
			@@ -60,6 +61,14 @@

			#endregion

			/// <summary>
			/// 初始化数据
			/// </summary>
			public void InitialData(HydroPropStatusHelper propStatusHelper)
			{
			this.hydroVisualPropertyCtrl1.InitialData(propStatusHelper);
			}

			#region 属性赋值

			/// <summary>
			@@ -79,6 +88,11 @@
			get { return this.hydroVisualPropertyCtrl1.SelectedObject; }
			set { this.hydroVisualPropertyCtrl1.SelectedObject = value; }
			}

			/// <summary>
			/// 计算结果
			/// </summary>
			public Func<HydroCalcuResult> CalcuResult { get; set; }

			#endregion

			@@ -131,7 +145,7 @@
			{
			var tankViewModel = vm as HydroTankViewModel;
			var input = HydroMatchingHelper.Create(tankViewModel);
			var dlg = new SimulationTankSingleMatchingDlg();
			var dlg = new AssetsTankSingleMatchingDlg();
			dlg.ReloadDataEvent += (output) =>
			{
			HydroMatchingHelper.Apply(tankViewModel, output);
			@@ -144,11 +158,12 @@
			dlg.ShowDialog();
			}
			break;

			case Yw.Hydro.ParterCatalog.Waterbox:
			{
			var tankViewModel = vm as HydroTankViewModel;
			var input = HydroMatchingHelper.Create(tankViewModel);
			var dlg = new SimulationTankSingleMatchingDlg();
			var dlg = new AssetsTankSingleMatchingDlg();
			dlg.ReloadDataEvent += (output) =>
			{
			HydroMatchingHelper.Apply(tankViewModel, output);
			@@ -161,11 +176,12 @@
			dlg.ShowDialog();
			}
			break;

			case Yw.Hydro.ParterCatalog.Blunthead:
			{
			var bluntheadViewModel = vm as HydroBluntheadViewModel;
			var input = HydroMatchingHelper.Create(bluntheadViewModel);
			var dlg = new SimulationBluntheadSingleMatchingDlg();
			var dlg = new AssetsBluntheadSingleMatchingDlg();
			dlg.ReloadDataEvent += (output) =>
			{
			HydroMatchingHelper.Apply(bluntheadViewModel, output);
			@@ -178,11 +194,12 @@
			dlg.ShowDialog();
			}
			break;

			case Yw.Hydro.ParterCatalog.Elbow:
			{
			var elbowViewModel = vm as HydroElbowViewModel;
			var input = HydroMatchingHelper.Create(elbowViewModel);
			var dlg = new SimulationElbowSingleMatchingDlg();
			var dlg = new AssetsElbowSingleMatchingDlg();
			dlg.ReloadDataEvent += (output) =>
			{
			HydroMatchingHelper.Apply(elbowViewModel, output);
			@@ -195,11 +212,12 @@
			dlg.ShowDialog();
			}
			break;

			case Yw.Hydro.ParterCatalog.Threelink:
			{
			var threelinkViewModel = vm as HydroThreelinkViewModel;
			var input = HydroMatchingHelper.Create(threelinkViewModel);
			var dlg = new SimulationThreelinkSingleMatchingDlg();
			var dlg = new AssetsThreelinkSingleMatchingDlg();
			dlg.ReloadDataEvent += (output) =>
			{
			HydroMatchingHelper.Apply(threelinkViewModel, output);
			@@ -212,11 +230,12 @@
			dlg.ShowDialog();
			}
			break;

			case Yw.Hydro.ParterCatalog.Fourlink:
			{
			var fourlinkViewModel = vm as HydroFourlinkViewModel;
			var input = HydroMatchingHelper.Create(fourlinkViewModel);
			var dlg = new SimulationFourlinkSingleMatchingDlg();
			var dlg = new AssetsFourlinkSingleMatchingDlg();
			dlg.ReloadDataEvent += (output) =>
			{
			HydroMatchingHelper.Apply(fourlinkViewModel, output);
			@@ -229,6 +248,7 @@
			dlg.ShowDialog();
			}
			break;

			case Yw.Hydro.ParterCatalog.Meter:
			{
			var meterViewModel = vm as HydroMeterViewModel;
			@@ -246,6 +266,7 @@
			dlg.ShowDialog();
			}
			break;

			case Yw.Hydro.ParterCatalog.Flowmeter:
			{
			var flowmeterViewModel = vm as HydroFlowmeterViewModel;
			@@ -263,6 +284,7 @@
			dlg.ShowDialog();
			}
			break;

			case Yw.Hydro.ParterCatalog.Pressmeter:
			{
			var pressmeterViewModel = vm as HydroPressmeterViewModel;
			@@ -280,11 +302,12 @@
			dlg.ShowDialog();
			}
			break;

			case Yw.Hydro.ParterCatalog.Nozzle:
			{
			var nozzleViewModel = vm as HydroNozzleViewModel;
			var input = HydroMatchingHelper.Create(nozzleViewModel);
			var dlg = new SimulationSprinklerSingleMatchingDlg();
			var dlg = new AssetsSprinklerSingleMatchingDlg();
			dlg.ReloadDataEvent += (output) =>
			{
			HydroMatchingHelper.Apply(nozzleViewModel, output);
			@@ -297,11 +320,12 @@
			dlg.ShowDialog();
			}
			break;

			case Yw.Hydro.ParterCatalog.Hydrant:
			{
			var hydrantViewModel = vm as HydroHydrantViewModel;
			var input = HydroMatchingHelper.Create(hydrantViewModel);
			var dlg = new SimulationHydrantSingleMatchingDlg();
			var dlg = new AssetsHydrantSingleMatchingDlg();
			dlg.ReloadDataEvent += (output) =>
			{
			HydroMatchingHelper.Apply(hydrantViewModel, output);
			@@ -314,11 +338,30 @@
			dlg.ShowDialog();
			}
			break;

			case Yw.Hydro.ParterCatalog.Cooling:
			{
			var coolingViewModel = vm as HydroCoolingViewModel;
			var input = HydroMatchingHelper.Create(coolingViewModel);
			var dlg = new AssetsCoolingSingleMatchingDlg();
			dlg.ReloadDataEvent += (output) =>
			{
			HydroMatchingHelper.Apply(coolingViewModel, output);
			this.hydroVisualPropertyCtrl1.UpdateRows();
			this.PropertyValueChangedEvent?.Invoke(vm.Vmo);
			this.MarkPropertyValueChangedEvent?.Invoke(vm.Vmo);
			this.GradingPropertyValueChangedEvent?.Invoke(vm.Vmo);
			};
			dlg.SetBindingData(input);
			dlg.ShowDialog();
			}
			break;

			case Yw.Hydro.ParterCatalog.Pipe:
			{
			var pipeViewModel = vm as HydroPipeViewModel;
			var input = HydroMatchingHelper.Create(pipeViewModel);
			var dlg = new SimulationPipeSingleMatchingDlg();
			var dlg = new AssetsPipeSingleMatchingDlg();
			dlg.ReloadDataEvent += (output) =>
			{
			HydroMatchingHelper.Apply(pipeViewModel, output);
			@@ -330,6 +373,7 @@
			dlg.ShowDialog();
			}
			break;

			case Yw.Hydro.ParterCatalog.Pump:
			{
			var pumpViewModel = vm as HydroPumpViewModel;
			@@ -347,11 +391,12 @@
			dlg.ShowDialog();
			}
			break;

			case Yw.Hydro.ParterCatalog.Valve:
			{
			var valveViewModel = vm as HydroValveViewModel;
			var input = HydroMatchingHelper.Create(valveViewModel);
			var dlg = new SimulationValveSingleMatchingDlg();
			var dlg = new AssetsValveSingleMatchingDlg();
			dlg.ReloadDataEvent += (output) =>
			{
			HydroMatchingHelper.Apply(valveViewModel, output);
			@@ -364,11 +409,12 @@
			dlg.ShowDialog();
			}
			break;

			case Yw.Hydro.ParterCatalog.Exchanger:
			{
			var exchangerViewModel = vm as HydroExchangerViewModel;
			var input = HydroMatchingHelper.Create(exchangerViewModel);
			var dlg = new SimulationExchangerSingleMatchingDlg();
			var dlg = new AssetsExchangerSingleMatchingDlg();
			dlg.ReloadDataEvent += (output) =>
			{
			HydroMatchingHelper.Apply(exchangerViewModel, output);
			@@ -381,11 +427,12 @@
			dlg.ShowDialog();
			}
			break;

			case Yw.Hydro.ParterCatalog.Compressor:
			{
			var compressorViewModel = vm as HydroCompressorViewModel;
			var input = HydroMatchingHelper.Create(compressorViewModel);
			var dlg = new SimulationCompressorSingleMatchingDlg();
			var dlg = new AssetsCompressorSingleMatchingDlg();
			dlg.ReloadDataEvent += (output) =>
			{
			HydroMatchingHelper.Apply(compressorViewModel, output);
			@@ -398,8 +445,8 @@
			dlg.ShowDialog();
			}
			break;
			default: break;

			default: break;
			}
			}

			@@ -414,16 +461,20 @@
			{
			case HydroCurve.Tank:
			{
			if (long.TryParse(vm.DbId, out long longDbId))
			var tankViewModel = vm as HydroTankViewModel;
			var curveInfo = tankViewModel.HydroInfo.Curves?.Find(x => x.Code == tankViewModel.VolCurve);
			if (curveInfo != null)
			{
			var tankViewModel = vm as HydroTankViewModel;
			var dlg = new TankChartShowDlg();
			dlg.SetBingingData(longDbId);
			dlg.ShowDialog();
			if (long.TryParse(curveInfo.DbId, out long longDbId))
			{
			var dlg = new AssetsTankCurveVOLViewDlg();
			dlg.SetBindingData(longDbId);
			dlg.ShowDialog();
			}
			}

			}
			break;

			case HydroCurve.Pump:
			{
			var pumpViewModel = vm as HydroPumpViewModel;
			@@ -435,44 +486,59 @@
			pumpViewModel.UpdateProperty();
			this.hydroVisualPropertyCtrl1.UpdateRows();
			};
			dlg.SetBindingData(pumpViewModel);
			dlg.SetBindingData(pumpViewModel, this.CalcuResult?.Invoke());
			dlg.ShowDialog();
			}
			break;

			case HydroCurve.Valve:
			{
			if (long.TryParse(vm.DbId, out long longDbId))
			var valveViewModel = vm as HydroValveViewModel;
			var curveInfo = valveViewModel.HydroInfo.Curves?.Find(x => x.Code == valveViewModel.ValveSetting);
			if (curveInfo != null)
			{
			var valveViewModel = vm as HydroValveViewModel;
			var dlg = new ValveChartShowDlg();
			dlg.SetBingingData(longDbId);
			dlg.ShowDialog();
			if (long.TryParse(curveInfo.DbId, out long longDbId))
			{
			var dlg = new AssetsValveCurveViewDlg();
			dlg.SetBindingData(longDbId);
			dlg.ShowDialog();
			}
			}
			}
			break;

			case HydroCurve.Exchanger:
			{
			if (long.TryParse(vm.DbId, out long longDbId))
			var exchangerViewModel = vm as HydroExchangerViewModel;
			var curveInfo = exchangerViewModel.HydroInfo.Curves?.Find(x => x.Code == exchangerViewModel.CurveQL);
			if (curveInfo != null)
			{
			var exchangerViewModel = vm as HydroExchangerViewModel;
			var dlg = new ExchangerChartShowDlg();
			dlg.SetBingingData(longDbId);
			dlg.ShowDialog();
			if (long.TryParse(curveInfo.DbId, out long longDbId))
			{
			var dlg = new AssetsExchangerCurveQLViewDlg();
			dlg.SetBindingData(longDbId);
			dlg.ShowDialog();
			}
			}

			}
			break;

			case HydroCurve.Compressor:
			{
			if (long.TryParse(vm.DbId, out long longDbId))
			var compressorViewModel = vm as HydroCompressorViewModel;
			var curveInfo = compressorViewModel.HydroInfo.Curves?.Find(x => x.Code == compressorViewModel.CurveQL);
			if (curveInfo != null)
			{
			var compressorViewModel = vm as HydroCompressorViewModel;
			var dlg = new CompressorChartShowDlg();
			dlg.SetBingingData(longDbId);
			dlg.ShowDialog();
			if (long.TryParse(curveInfo.DbId, out long longDbId))
			{
			var dlg = new AssetsCompressorCurveQLViewDlg();
			dlg.SetBindingData(longDbId);
			dlg.ShowDialog();
			}
			}
			}
			break;

			default: break;
			}
			}
			@@ -526,7 +592,5 @@
			}

			#endregion


			}
			}