创建方案

lixiaojun

2025-01-03 d672ca82c49f01dae2c5c955202b5857ef680a71

 Service/HStation.Service.Revit.Core/04-service/01-json/RevitJsonHelper.cs

@@ -150,6 +150,15 @@
                                }
                            }
                            break;
                        case RevitJsonCatalog.Cooling:
                            {
                                var cooling = ParseCooling(jobject);
                                if (cooling != null)
                                {
                                    model.Coolings.Add(cooling);
                                }
                            }
                            break;
                        case RevitJsonCatalog.Pipe:
                            {
                                var pipe = ParsePipe(jobject);
@@ -1434,7 +1443,14 @@
            {
                blunthead.Caliber = caliber;
            }
            else
            if (blunthead.Caliber <= 0)
            {
                if (jobject[RevitJsonProp.DN].MatchNumeric(out caliber))
                {
                    blunthead.Caliber = caliber;
                }
            }
            if (blunthead.Caliber <= 0)
            {
                blunthead.UpdatePropStatus(nameof(blunthead.Caliber), ePropStatus.Abnormal, "[口径信息]缺少或者数据格式错误");
            }
@@ -1676,7 +1692,14 @@
            {
                elbow.Caliber = caliber;
            }
            else
            if (elbow.Caliber <= 0)
            {
                if (jobject[RevitJsonProp.DN].MatchNumeric(out caliber))
                {
                    elbow.Caliber = caliber;
                }
            }
            if (elbow.Caliber <= 0)
            {
                elbow.UpdatePropStatus(nameof(elbow.Caliber), ePropStatus.Abnormal, "[口径信息]缺少或者数据格式错误");
            }
@@ -1730,7 +1753,7 @@

            if (jobject[RevitJsonProp.BendingAngle].MatchNumeric(out double bendingAngle))
            {
                elbow.BendingAngle = bendingAngle;
                elbow.BendingAngle = (int)bendingAngle;
            }
            else
            {
@@ -1947,7 +1970,14 @@
            {
                threelink.Caliber = caliber;
            }
            else
            if (threelink.Caliber <= 0)
            {
                if (jobject[RevitJsonProp.DN].MatchNumeric(out caliber))
                {
                    threelink.Caliber = caliber;
                }
            }
            if (threelink.Caliber <= 0)
            {
                threelink.UpdatePropStatus(nameof(threelink.Caliber), ePropStatus.Abnormal, "[口径信息]缺少或者数据格式错误");
            }
@@ -2214,7 +2244,14 @@
            {
                fourlink.Caliber = caliber;
            }
            else
            if (fourlink.Caliber <= 0)
            {
                if (jobject[RevitJsonProp.DN].MatchNumeric(out caliber))
                {
                    fourlink.Caliber = caliber;
                }
            }
            if (fourlink.Caliber <= 0)
            {
                fourlink.UpdatePropStatus(nameof(fourlink.Caliber), ePropStatus.Abnormal, "[口径信息]缺少或者数据格式错误");
            }
@@ -2802,6 +2839,289 @@
            #endregion

            return hydrant;
        }

        //解析冷却塔
        private static HStation.Model.RevitCooling ParseCooling(JToken jobject)
        {
            if (jobject == null)
            {
                return default;
            }

            var cooling = new Model.RevitCooling();
            cooling.Catalog = RevitJsonCatalog.Cooling;

            #region Id 

            if (jobject.ParseString(RevitJsonProp.Id, out string id))
            {
                cooling.Id = id;
            }
            else
            {
                cooling.UpdatePropStatus(nameof(cooling.Id), ePropStatus.Error, "缺少[构件编码]");
            }

            #endregion

            #region Name

            if (jobject.ParseString(RevitJsonProp.Name, out string name))
            {
                cooling.Name = name;
                cooling.UpdatePropStatus(nameof(cooling.Name), ePropStatus.Lack, "[构件名称]缺省");
            }
            else
            {
                cooling.UpdatePropStatus(nameof(cooling.Name), ePropStatus.Error, "缺少 [构件名称]");
            }

            #endregion

            #region ModelType

            if (jobject.ParseString(RevitJsonProp.ModelType, out string modelType))
            {
                cooling.ModelType = modelType;
                if (string.IsNullOrEmpty(cooling.ModelType))
                {
                    cooling.UpdatePropStatus(nameof(cooling.ModelType), ePropStatus.Lack, "[型号信息]缺省");
                }
            }
            else
            {
                cooling.UpdatePropStatus(nameof(cooling.ModelType), ePropStatus.Error, "缺少[型号信息]");
            }

            #endregion

            #region Flags

            if (jobject.ParseString(RevitJsonProp.Flags, out string flags))
            {
                cooling.Flags = Yw.Untity.FlagsHelper.ToList(flags);
                if (!string.IsNullOrEmpty(flags))
                {
                    if (cooling.Flags == null || cooling.Flags.Count < 1)
                    {
                        cooling.UpdatePropStatus(nameof(cooling.Flags), ePropStatus.Abnormal, "[标签信息]格式错误");
                    }
                }
            }
            else
            {
                cooling.UpdatePropStatus(nameof(cooling.Flags), ePropStatus.Error, "缺少[标签信息]");
            }

            #endregion

            #region Description

            if (jobject.ParseString(RevitJsonProp.Description, out string description))
            {
                cooling.Description = description;
            }
            else
            {
                cooling.UpdatePropStatus(nameof(cooling.Description), ePropStatus.Error, "缺少[说明信息]");
            }

            #endregion

            #region ConnectList

            if (jobject.ParseString(RevitJsonProp.Connects, out string connectString))
            {
                var connectList = JsonHelper.Json2Object<List<RevitJsonConnectModel>>(connectString);
                cooling.ConnectList = connectList?.Select(x => new Model.RevitConnect()
                {
                    Id = x.ConnectId,
                    Direction = x.Dirction,
                    Position = new Model.RevitPosition()
                    {
                        X = x.Point.X / 1000f,
                        Y = x.Point.Y / 1000f,
                        Z = x.Point.Z / 1000f
                    }
                }).ToList();
                if (cooling.ConnectList == null || cooling.ConnectList.Count < 1)
                {
                    cooling.UpdatePropStatus(nameof(cooling.ConnectList), ePropStatus.Error, "[连接列表]解析失败");
                }
            }
            else
            {
                cooling.UpdatePropStatus(nameof(cooling.ConnectList), ePropStatus.Error, "缺少[连接列表]");
            }

            #endregion

            #region Position

            cooling.Position = cooling.ConnectList?.GetCenterPosition();
            if (cooling.Position == null)
            {
                cooling.UpdatePropStatus(nameof(cooling.Position), ePropStatus.Lack, "[位置信息]缺省，可能是受[连接列表]解析失败影响");
            }

            #endregion

            #region Elev

            if (jobject[RevitJsonProp.Elev].MatchNumeric(out double elev))
            {
                cooling.Elev = elev;
            }
            else
            {
                cooling.UpdatePropStatus(nameof(cooling.Elev), ePropStatus.Abnormal, "[标高信息]缺少或者格式错误");
            }

            if (cooling.Elev <= 0)
            {
                if (jobject[RevitJsonProp.ElevOfElevation].MatchNumeric(out double elevOfElevation))
                {
                    cooling.Elev = elevOfElevation / 1000f;
                }
                else
                {
                    cooling.UpdatePropStatus(nameof(cooling.Elev), ePropStatus.Abnormal, "[标高中的高程]缺少或者格式错误");
                }
            }

            if (cooling.Elev <= 0)
            {
                //通过z轴自动计算
                if (cooling.Position == null)
                {
                    cooling.UpdatePropStatus(nameof(cooling.Elev), ePropStatus.Lack, "[标高信息]缺省，受[位置]影响，无法通过Z轴自动计算");
                }
                else
                {
                    cooling.Elev = cooling.Position.Z;
                    cooling.UpdatePropStatus(nameof(cooling.Elev), ePropStatus.Lack, "[标高信息]缺省，通过Z轴自动计算");
                }
            }

            #endregion

            #region Material

            if (jobject.ParseString(RevitJsonProp.Material, out string material))
            {
                cooling.Material = material;
                if (string.IsNullOrEmpty(cooling.Material))
                {
                    cooling.UpdatePropStatus(nameof(cooling.Material), ePropStatus.Lack, "[材质信息]缺省");
                }
            }
            else
            {
                cooling.UpdatePropStatus(nameof(cooling.Material), ePropStatus.Abnormal, "缺少[材质信息]");
            }

            #endregion

            #region Caliber

            if (jobject[RevitJsonProp.Caliber].MatchNumeric(out double caliber))
            {
                cooling.Caliber = caliber;
            }
            else
            {
                cooling.UpdatePropStatus(nameof(cooling.Caliber), ePropStatus.Abnormal, "[口径信息]缺少或者数据格式错误");
            }

            #endregion

            #region Demand

            if (jobject[RevitJsonProp.Demand].MatchNumeric(out double demand))
            {
                cooling.Demand = demand;
            }
            else
            {
                cooling.UpdatePropStatus(nameof(cooling.Demand), ePropStatus.Abnormal, "[需水量]缺少或者数据格式错误");
            }

            #endregion

            #region DemandPattern

            if (jobject.ParseString(RevitJsonProp.DemandPattern, out string demandPattern))
            {
                cooling.DemandPattern = demandPattern;
                if (string.IsNullOrEmpty(cooling.DemandPattern))
                {
                    cooling.UpdatePropStatus(nameof(cooling.DemandPattern), ePropStatus.Lack, "[需水模式]缺省");
                }
            }
            else
            {
                cooling.UpdatePropStatus(nameof(cooling.DemandPattern), ePropStatus.Abnormal, "缺少[需水模式]");
            }

            #endregion

            #region MinorLoss

            if (jobject[RevitJsonProp.MinorLoss].MatchNumeric(out double minorLoss))
            {
                cooling.MinorLoss = minorLoss;
            }
            else
            {
                cooling.UpdatePropStatus(nameof(cooling.MinorLoss), ePropStatus.Abnormal, "[局阻系数]缺少或者数据格式错误");
            }

            #endregion

            #region Coefficient

            if (jobject[RevitJsonProp.CoefficientP].MatchNumeric(out double coeffientp))
            {
                cooling.Coefficient = coeffientp;
                if (cooling.Coefficient <= 0)
                {
                    cooling.UpdatePropStatus(nameof(cooling.Coefficient), ePropStatus.Lack, "[喷射系数]缺省");
                }
            }
            else
            {
                cooling.UpdatePropStatus(nameof(cooling.Coefficient), ePropStatus.Abnormal, "[喷射系数]缺少或者格式错误");
                if (jobject[RevitJsonProp.CoefficientF].MatchNumeric(out double coeffientf))
                {
                    cooling.Coefficient = coeffientf;
                    if (cooling.Coefficient <= 0)
                    {
                        cooling.UpdatePropStatus(nameof(cooling.Coefficient), ePropStatus.Lack, "[流量系数]缺省");
                    }
                }
            }

            #endregion

            #region LowerLimit

            if (jobject[RevitJsonProp.LowerLimit].MatchNumeric(out double lowerLimit))
            {
                cooling.LowerLimit = lowerLimit;
                if (cooling.LowerLimit <= 0)
                {
                    cooling.UpdatePropStatus(nameof(cooling.LowerLimit), ePropStatus.Lack, "[最小压力]缺省");
                }
            }
            else
            {
                cooling.UpdatePropStatus(nameof(cooling.LowerLimit), ePropStatus.Abnormal, "[最小压力]缺少或者格式错误");
            }

            #endregion

            return cooling;
        }

        //解析水表
@@ -3492,7 +3812,10 @@
            if (jobject.ParseString(RevitJsonProp.Name, out string name))
            {
                pipe.Name = name;
                pipe.UpdatePropStatus(nameof(pipe.Name), ePropStatus.Lack, "[构件名称]缺省");
                if (string.IsNullOrEmpty(pipe.Name))
                {
                    pipe.UpdatePropStatus(nameof(pipe.Name), ePropStatus.Lack, "[构件名称]缺省");
                }
            }
            else
            {
@@ -3522,7 +3845,7 @@

            if (jobject.ParseString(RevitJsonProp.Flags, out string flags))
            {
                pipe.Flags = Yw.Untity.FlagsHelper.ToList(flags);
                pipe.Flags = RevitFlagsHelper.ToList(flags);
                if (!string.IsNullOrEmpty(flags))
                {
                    if (pipe.Flags == null || pipe.Flags.Count < 1)
@@ -3657,7 +3980,8 @@

            #region Diameter

            if (jobject[RevitJsonProp.Diameter].MatchNumeric(out double diameter))
            //直径信息
            if (jobject[RevitJsonProp.DiameterInfo].MatchNumeric(out double diameter))
            {
                pipe.Diameter = diameter;
            }
@@ -3666,11 +3990,26 @@
                pipe.UpdatePropStatus(nameof(pipe.Diameter), ePropStatus.Abnormal, "[直径信息]缺少或者格式错误");
            }

            //直径
            if (pipe.Diameter < 1)
            {
                if (jobject[RevitJsonProp.InternalDiameter].MatchNumeric(out double internalDiameter))
                if (jobject[RevitJsonProp.Diameter].MatchNumeric(out diameter))
                {
                    pipe.Diameter = internalDiameter;
                    pipe.Diameter = diameter;
                    pipe.UpdatePropStatus(nameof(pipe.Diameter), ePropStatus.Lack, "[直径信息]通过[直径]进行修复]");
                }
                else
                {
                    pipe.UpdatePropStatus(nameof(pipe.Diameter), ePropStatus.Abnormal, "[直径信息]无法通过[直径]进行修复]");
                }
            }

            //内径
            if (pipe.Diameter < 1)
            {
                if (jobject[RevitJsonProp.InternalDiameter].MatchNumeric(out diameter))
                {
                    pipe.Diameter = diameter;
                    pipe.UpdatePropStatus(nameof(pipe.Diameter), ePropStatus.Lack, "[直径信息]通过[内径]进行修复]");
                }
                else
@@ -3679,6 +4018,7 @@
                }
            }

            //公称直径
            if (pipe.Diameter < 1)
            {
                if (jobject[RevitJsonProp.DN].MatchNumeric(out double dn))
@@ -3694,8 +4034,7 @@

            if (pipe.Diameter < 1)
            {
                pipe.Diameter = 500;
                pipe.UpdatePropStatus(nameof(pipe.Diameter), ePropStatus.Lack, "[直径信息][内径]解析错误，使用默认值(500mm)修正]");
                pipe.UpdatePropStatus(nameof(pipe.Diameter), ePropStatus.Error, "[直径信息]解析错误，无法通过【直径】【内径】【公称直径】修复");
            }

            #endregion
@@ -3997,7 +4336,7 @@

            #region Diameter

            if (jobject[RevitJsonProp.Diameter].MatchNumeric(out double diameter))
            if (jobject[RevitJsonProp.DiameterInfo].MatchNumeric(out double diameter))
            {
                translation.Diameter = diameter;
            }
@@ -4036,6 +4375,24 @@
            {
                translation.Diameter = 500;
                translation.UpdatePropStatus(nameof(translation.Diameter), ePropStatus.Lack, "[直径信息][内径]解析错误，使用默认值(500mm)修正]");
            }

            #endregion

            #region StartDiameter

            if (jobject[RevitJsonProp.MaxSize].MatchNumeric(out double maxSize))
            {
                translation.StartDiameter = maxSize;
            }

            #endregion

            #region EndDiameter

            if (jobject[RevitJsonProp.MinSize].MatchNumeric(out double minSize))
            {
                translation.EndDiameter = minSize;
            }

            #endregion
@@ -4734,7 +5091,7 @@

            #region Diameter

            if (jobject[RevitJsonProp.Diameter].MatchNumeric(out double diameter))
            if (jobject[RevitJsonProp.DiameterInfo].MatchNumeric(out double diameter))
            {
                valve.Diameter = diameter;
            }
@@ -4745,9 +5102,9 @@

            if (valve.Diameter < 1)
            {
                if (jobject[RevitJsonProp.InternalDiameter].MatchNumeric(out double internalDiameter))
                if (jobject[RevitJsonProp.InternalDiameter].MatchNumeric(out diameter))
                {
                    valve.Diameter = internalDiameter;
                    valve.Diameter = diameter;
                    valve.UpdatePropStatus(nameof(valve.Diameter), ePropStatus.Lack, "[直径信息]通过[内径]进行修复]");
                }
                else
@@ -4758,9 +5115,9 @@

            if (valve.Diameter < 1)
            {
                if (jobject[RevitJsonProp.DN].MatchNumeric(out double dn))
                if (jobject[RevitJsonProp.DN].MatchNumeric(out diameter))
                {
                    valve.Diameter = dn;
                    valve.Diameter = diameter;
                    valve.UpdatePropStatus(nameof(valve.Diameter), ePropStatus.Lack, "[直径信息]通过[公称直径]进行修复]");
                }
                else
@@ -4771,8 +5128,33 @@

            if (valve.Diameter < 1)
            {
                valve.Diameter = 500;
                valve.UpdatePropStatus(nameof(valve.Diameter), ePropStatus.Lack, "[直径信息][内径]解析错误，使用默认值(500mm)修正]");
                if (jobject[RevitJsonProp.MaxSize].MatchNumeric(out diameter))
                {
                    valve.Diameter = diameter;
                    valve.UpdatePropStatus(nameof(valve.Diameter), ePropStatus.Lack, "[直径信息]通过[最大尺寸]进行修复]");
                }
                else
                {
                    valve.UpdatePropStatus(nameof(valve.Diameter), ePropStatus.Abnormal, "[直径信息]无法通过[最大尺寸]进行修复]");
                }
            }

            if (valve.Diameter < 1)
            {
                if (jobject[RevitJsonProp.MinSize].MatchNumeric(out diameter))
                {
                    valve.Diameter = diameter;
                    valve.UpdatePropStatus(nameof(valve.Diameter), ePropStatus.Lack, "[直径信息]通过[最小尺寸]进行修复]");
                }
                else
                {
                    valve.UpdatePropStatus(nameof(valve.Diameter), ePropStatus.Abnormal, "[直径信息]无法通过[最小尺寸]进行修复]");
                }
            }

            if (valve.Diameter < 1)
            {
                valve.UpdatePropStatus(nameof(valve.Diameter), ePropStatus.Lack, "[直径信息]解析错误，无法通过[内径][公称直径][最大尺寸][最小尺寸]修复");
            }

            #endregion
@@ -4845,7 +5227,7 @@
            else
            {
                valve.OpeningDegree = 100;
                valve.UpdatePropStatus(nameof(valve.MinorLoss), ePropStatus.Abnormal, "[阀门开度]缺少或者数据格式错误，使用默认值(100)进行修正");
                valve.UpdatePropStatus(nameof(valve.OpeningDegree), ePropStatus.Abnormal, "[阀门开度]缺少或者数据格式错误，使用默认值(100)进行修正");
            }

            #endregion
@@ -5112,7 +5494,7 @@

            #region Diameter

            if (jobject[RevitJsonProp.Diameter].MatchNumeric(out double diameter))
            if (jobject[RevitJsonProp.DiameterInfo].MatchNumeric(out double diameter))
            {
                exchanger.Diameter = diameter;
            }
@@ -5430,7 +5812,7 @@

            #region Diameter

            if (jobject[RevitJsonProp.Diameter].MatchNumeric(out double diameter))
            if (jobject[RevitJsonProp.DiameterInfo].MatchNumeric(out double diameter))
            {
                compressor.Diameter = diameter;
            }