2023年12月2日_3

cloudflight

2023-12-02 c0f9915265878e56e91ee97f7f8d925db1e12626

 Hydro.Inp/NetWork.cs

@@ -1,4 +1,5 @@
using Hydro.Core.Model;
//using Hydro.HydraulicModel;
using System;
using System.Collections.Generic;
using System.Drawing;
@@ -20,76 +21,173 @@
        public NetWork()
        {
        }
        public string Title { get; set; }

        private List<JunctionModel> Junctions { get; set; } = new List<JunctionModel>();

        private List<TankModel> Tanks { get; set; } = new List<TankModel>();

        private List<PipeModel> Pipes { get; set; } = new List<PipeModel>();

        private List<PumpModel> Pumps { get; set; } = new List<PumpModel>();

        private List<ValveModel> Valves { get; set; } = new List<ValveModel>();

        private List<ReservoisModel> Reservos { get; set; } = new List<ReservoisModel>();

        private List<MeterModel> Meters { get; set; } = new List<MeterModel>();

        private List<NozzleModel> Nozzles { get; set; } = new List<NozzleModel>();

        public void AddJunction(JunctionModel junction)
        public List<JunctionModel> Junctions
        {
            Junctions.Add(junction);
            get
            {
                var js = Nodes.Where(d => d is JunctionModel);
                return js?.Select(d => d as JunctionModel).ToList();
            }

        }
        public List<TankModel> Tanks
        {
            get
            {
                var js = Nodes.Where(d => d is TankModel);
                return js?.Select(d => d as TankModel).ToList();
            }
        }

        public List<PipeModel> Pipes
        {
            get
            {
                var js = Links.Where(d => d is PipeModel);
                return js?.Select(d => d as PipeModel).ToList();
            }
        }

        public List<PumpModel> Pumps
        {
            get
            {
                var js = Links.Where(d => d is PumpModel);
                return js?.Select(d => d as PumpModel).ToList();
            }
        }

        public List<ValveModel> Valves
        {
            get
            {
                var js = Links.Where(d => d is ValveModel);
                return js?.Select(d => d as ValveModel).ToList();
            }
        }

        public List<ReservoisModel> Reservos
        {
            get
            {
                var js = Nodes.Where(d => d is ReservoisModel);
                return js?.Select(d => d as ReservoisModel).ToList();
            }
        }

        public List<MeterModel> Meters
        {
            get
            {
                var js = Nodes.Where(d => d is MeterModel);
                return js?.Select(d => d as MeterModel).ToList();
            }
        }

        public List<NozzleModel> Nozzles
        {
            get
            {
                var js = Nodes.Where(d => d is NozzleModel);
                return js?.Select(d => d as NozzleModel).ToList();
            }
        }

        public virtual void AddJunction(JunctionModel junction)
        {
            CheckNodesExist(junction);
            Nodes.Add(junction);
        }

        public void AddTank(TankModel tank)
        public virtual void AddJunctions(List<JunctionModel> junctions)
        {
            Tanks.Add(tank);
            junctions.ForEach(junction => { AddJunction(junction); });
        }

        public virtual void AddTank(TankModel tank)
        {
            CheckNodesExist(tank);
            Nodes.Add(tank);
        }

        public void AddPipe(PipeModel pipe)
        public virtual void AddTanks(List<TankModel> tanks)
        {
            Pipes.Add(pipe);
            tanks.ForEach(tank => { AddTank(tank); });
        }

        public virtual void AddPipe(PipeModel pipe)
        {
            CheckLinksExist(pipe);
            Links.Add(pipe);
        }

        public void AddPump(PumpModel pump)
        public virtual void AddPipes(List<PipeModel> pipes)
        {
            Pumps.Add(pump);
            pipes.ForEach(pipe => { AddPipe(pipe); });
        }
        public virtual void AddPump(PumpModel pump)
        {
            CheckLinksExist(pump);
            Links.Add(pump);
        }

        public void AddValve(ValveModel valve)
        public virtual void AddPumps(List<PumpModel> pumps)
        {
            Valves.Add(valve);
            pumps.ForEach(pump => { AddPump(pump); });
        }
        public virtual void AddValve(ValveModel valve)
        {
            CheckLinksExist(valve);
            Links.Add(valve);
        }

        public void AddReservos(ReservoisModel reservois)
        public virtual void AddValves(List<ValveModel> valves)
        {
            Reservos.Add(reservois);
            valves.ForEach(valve => { AddValve(valve); });
        }
        public virtual void AddReservos(ReservoisModel reservois)
        {
            CheckNodesExist(reservois);
            Nodes.Add(reservois);
        }

        public void AddMeter(MeterModel meter)
        public virtual void AddReservoss(List<ReservoisModel> reservoiss)
        {
            Meters.Add(meter);
            reservoiss.ForEach(reservois => { AddReservos(reservois); });
        }
        public virtual void AddMeter(MeterModel meter)
        {
            CheckNodesExist(meter);
            Nodes.Add(meter);
            Junctions.Add(meter.ToJunction());
        }

        public void AddNozzle(NozzleModel nozzle)
        public virtual void AddMeters(List<MeterModel> meters)
        {
            Nozzles.Add(nozzle);
            meters.ForEach(meter => { AddMeter(meter); });
        }
        public virtual void AddNozzle(NozzleModel nozzle)
        {
            CheckNodesExist(nozzle);
            Nodes.Add(nozzle);
            Junctions.Add(nozzle.ToJunction());
        }
        public virtual void AddNozzles(List<NozzleModel> nozzles)
        {
            nozzles.ForEach(nozzle => { AddNozzle(nozzle); });
        }

        public List<NodeModel> Nodes { get; set; } = new List<NodeModel>();
        public List<LinkModel> Links { get; set; } = new List<LinkModel>();
        private void CheckNodesExist(NodeCalcModel node)
        {
            if (Nodes.Any(d => d.ID == node.ID))
                throw new Exception("已存在重复的对象");
        }

        private void CheckLinksExist(LinkCalcModel link)
        {
            if (Links.Any(d => d.ID == link.ID))
                throw new Exception("已存在重复的对象");
        }

        public List<NodeCalcModel> Nodes { get; set; } = new List<NodeCalcModel>();
        public List<LinkCalcModel> Links { get; set; } = new List<LinkCalcModel>();

        /// <summary>
        /// 根据INP文件生成
@@ -141,7 +239,6 @@
                                            Elev = Elev,
                                            Demand = Demand,
                                            PatternID = PatternID,
                                            Level = Level
                                        });
                                    }
                                    else if (parts[5] == "Nozzle")
@@ -152,7 +249,6 @@
                                            Elev = Elev,
                                            Demand = Demand,
                                            PatternID = PatternID,
                                            Level = Level
                                        });
                                    }
                                    else
@@ -163,7 +259,6 @@
                                            Elev = Elev,
                                            Demand = Demand,
                                            PatternID = PatternID,
                                            Level = Level
                                        });
                                    }

@@ -178,8 +273,8 @@
                                        r.Head = head;
                                    r.PatternID = parts.Length > 2 ? parts[2] : "";
                                    int level;
                                    if (int.TryParse(parts[3], out level))
                                        r.Level = level;
                                    //if (int.TryParse(parts[3], out level))
                                    //    r.Level = level;
                                    AddReservos(r);
                                }
                                break;
@@ -212,9 +307,9 @@
                                        VolCurve = "",
                                        IsOverFlow = true
                                    };
                                    int level;
                                    if (int.TryParse(parts[9], out level))
                                        tank.Level = level;
                                    //int level;
                                    //if (int.TryParse(parts[9], out level))
                                    //    tank.Level = level;
                                    AddTank(tank);
                                }
                                break;
@@ -237,9 +332,9 @@
                                    if (float.TryParse(parts[6], out minorLoss))
                                        p.MinorLoss = minorLoss;
                                    p.Status = parts.Length > 7 ? StatusType.CLOSED : StatusType.DEFAULT;
                                    int level;
                                    if (int.TryParse(parts[8], out level))
                                        p.Level = level;
                                    //int level;
                                    //if (int.TryParse(parts[8], out level))
                                    //    p.Level = level;
                                    AddPipe(p);
                                }
                                break;
@@ -260,9 +355,9 @@
                                    float minorLoss;
                                    if (float.TryParse(parts[6], out minorLoss))
                                        valve.MinorLoss = minorLoss;
                                    int level;
                                    if (int.TryParse(parts[7], out level))
                                        valve.Level = level;
                                    //int level;
                                    //if (int.TryParse(parts[7], out level))
                                    //    valve.Level = level;
                                    AddValve(valve);
                                }
                                break;
@@ -310,87 +405,95 @@
                }
                sr.Close();

                //读取坐标
                Junctions.ForEach(o =>
                {
                    var p = points.Where(d => d.ID == o.ID).FirstOrDefault();
                    if (p != null)
                    {
                        o.X = p.Position.X;
                        o.Y = p.Position.Y;
                    }
                });

                Reservos.ForEach(o =>
                {
                    var p = points.Where(d => d.ID == o.ID).FirstOrDefault();
                    if (p != null)
                    {
                        o.X = p.Position.X;
                        o.Y = p.Position.Y;
                    }
                });

                Tanks.ForEach(o =>
                {
                    var p = points.Where(d => d.ID == o.ID).FirstOrDefault();
                    if (p != null)
                    {
                        o.X = p.Position.X;
                        o.Y = p.Position.Y;
                    }
                });

                Meters.ForEach(o =>
                {
                    var p = points.Where(d => d.ID == o.ID).FirstOrDefault();
                    if (p != null)
                    {
                        o.X = p.Position.X;
                        o.Y = p.Position.Y;
                    }
                });

                Nozzles.ForEach(o =>
                {
                    var p = points.Where(d => d.ID == o.ID).FirstOrDefault();
                    if (p != null)
                    {
                        o.X = p.Position.X;
                        o.Y = p.Position.Y;
                    }
                });

                int k1 = 0;
                int k2 = 0;
                #region delete

                //Nodes.Sort((a, b) => string.Compare(a.ID, b.ID));
                //points.Sort((a, b) => string.Compare(a.ID, b.ID));
                //k1 = 0;
                //k2 = 0;
                //while (k1 < Nodes.Count)
                //{
                //    var J = Nodes[k1];
                //    var coor = points[k2];

                //    while (J.ID != coor.ID && k2 < points.Count)
                //    {
                //        k2++;
                //        if (k2 < points.Count) coor = points[k2];

                //    }
                //    if (k2 == points.Count)
                //    {
                //        throw new Exception($"未找到Node[{J.ID}]的坐标");
                //    }
                //    J.X = coor.Position.X;
                //    J.Y = coor.Position.Y;

                //    k1++;
                //}
                #region 坐标匹配方法
                #endregion

                #region 删除
                //[Cloudflight修改]2023-11-27    二重循环匹配坐标速度太慢
                ////读取坐标
                //Junctions.ForEach(o =>
                //{
                //    var p = points.Where(d => d.ID == o.ID).FirstOrDefault();
                //    if (p != null)
                //    {
                //        o.X = p.Position.X;
                //        o.Y = p.Position.Y;
                //    }
                //});

                //Reservos.ForEach(o =>
                //{
                //    var p = points.Where(d => d.ID == o.ID).FirstOrDefault();
                //    if (p != null)
                //    {
                //        o.X = p.Position.X;
                //        o.Y = p.Position.Y;
                //    }
                //});

                //Tanks.ForEach(o =>
                //{
                //    var p = points.Where(d => d.ID == o.ID).FirstOrDefault();
                //    if (p != null)
                //    {
                //        o.X = p.Position.X;
                //        o.Y = p.Position.Y;
                //    }
                //});

                //Meters.ForEach(o =>
                //{
                //    var p = points.Where(d => d.ID == o.ID).FirstOrDefault();
                //    if (p != null)
                //    {
                //        o.X = p.Position.X;
                //        o.Y = p.Position.Y;
                //    }
                //});

                //Nozzles.ForEach(o =>
                //{
                //    var p = points.Where(d => d.ID == o.ID).FirstOrDefault();
                //    if (p != null)
                //    {
                //        o.X = p.Position.X;
                //        o.Y = p.Position.Y;
                //    }
                //});
                #endregion

                #region 优化方案
                int k1 = 0;
                int k2 = 0;
                

                Nodes.Sort((a, b) => string.Compare(a.ID, b.ID));
                points.Sort((a, b) => string.Compare(a.ID, b.ID));
                k1 = 0;
                k2 = 0;
                while (k1 < Nodes.Count)
                {
                    var J = Nodes[k1];
                    var coor = points[k2];

                    while (J.ID != coor.ID && k2 < points.Count)
                    {
                        k2++;
                        if (k2 < points.Count) coor = points[k2];

                    }
                    if (k2 == points.Count)
                    {
                        throw new Exception($"未找到Node[{J.ID}]的坐标");
                    }
                    J.X = coor.Position.X;
                    J.Y = coor.Position.Y;

                    k1++;
                }
                #endregion

             

                //建立点线关系链表StartNode，先将管线以Node1（节点1的ID）排序，再将Nodes按ID排序，建立两个游标k1、k2，正向一次循环，建立链表关系
                //时间复杂度 O(n)
@@ -439,7 +542,6 @@
                    //if (J.MaxDiameter < p.Diameter) J.MaxDiameter = p.Diameter;
                    //J.Links.Add(p);
                    k2++;

                }
                return true;
            }
@@ -451,7 +553,7 @@
        /// <param name="InpPath">Inp文件路径</param>
        /// <param name="TemplateInpFullPath">Inp模板文件绝对路径，如果为空就用系统默认模板文件</param>
        /// <exception cref="Exception"></exception>
        public virtual void BuildToInp(string InpPath, string TemplateInpFullPath = "")
        public virtual void BuildToInp(string InpPath, string TemplateInpFullPath = "", string sourcePath = null, bool isReplace = false)
        {

            string tempString = "";
@@ -495,18 +597,18 @@

            Junctions.ForEach(j =>
            {
                junctionStringBuilder.AppendLine(j.ToString() + $"{j.Level}\tJunction");
                junctionStringBuilder.AppendLine(j.ToString() + $"0\tJunction");
                coorStringBuilder.AppendLine(j.ToCoorString());

            });
            Meters.ForEach(m =>
            {
                junctionStringBuilder.AppendLine(m.ToString() + $"{m.Level}\tMeter");
                junctionStringBuilder.AppendLine(m.ToString() + $"0\tMeters");
                coorStringBuilder.AppendLine(m.ToCoorString());
            });
            Nozzles.ForEach(no =>
            {
                junctionStringBuilder.AppendLine(no.ToString() + $"{no.Level}\tNozzle\t{no.FlowCoefficient}");
                junctionStringBuilder.AppendLine(no.ToString() + $"0\tNozzle\t{no.FlowCoefficient}");
                emitterStringBuilder.Append(no.ToEmitterString());
                coorStringBuilder.AppendLine(no.ToCoorString());
            });
@@ -519,7 +621,7 @@

            Reservos.ForEach(o =>
            {
                reservoirStringBuilder.AppendLine(o.ToString() + $"{o.Level}\t{o.Elev}");
                reservoirStringBuilder.AppendLine(o.ToString() + $"0\t{o.Elev}");
                coorStringBuilder.AppendLine(o.ToCoorString());
            });
            string reserverString = reservoirStringBuilder.ToString();
@@ -530,7 +632,7 @@

            Tanks.ForEach(o =>
            {
                tankStringBuilder.AppendLine(o.ToString() + $"{o.Level}");
                tankStringBuilder.AppendLine(o.ToString());// + $"0");
                coorStringBuilder.AppendLine(o.ToCoorString());
            });
            string tankString = tankStringBuilder.ToString();
@@ -541,7 +643,7 @@

            Pipes.ForEach(p =>
            {
                pipeStringBuilder.AppendLine(p.ToString() + $"{p.Level}");
                pipeStringBuilder.AppendLine(p.ToString());// + $"{p.Level}");
                statusStringBuilder.Append(p.ToStatusString());
            });

@@ -553,7 +655,7 @@

            Valves.ForEach(o =>
            {
                valveStringBuilder.AppendLine(o.ToString() + $"{o.Level}");
                valveStringBuilder.AppendLine(o.ToString());// + $"0");
                statusStringBuilder.Append(o.ToStatusString());
            });
            string valveString = valveStringBuilder.ToString();
@@ -564,7 +666,7 @@

            Pumps.ForEach(o =>
            {
                pumpStringBuilder.AppendLine(o.ToString() + $"{o.Level}");
                pumpStringBuilder.AppendLine(o.ToString());// + $"0");
                statusStringBuilder.Append(o.ToStatusString());
            });
            string pumpString = pumpStringBuilder.ToString();
@@ -634,14 +736,222 @@
            //Global.ClearFileReadOnly(InpPath);
            File.WriteAllText(InpPath, output);
        }
        //public void BuildToInp(string filePath, string userCoorString = null, string sourcePath = null, bool isReplace = false)
        //{

        //    if (sourcePath == null) sourcePath = filePath;

        //    string tempString = "";
        //    if (!isReplace)
        //    {
        //        var tempPath = Path.Combine(Directory.GetCurrentDirectory(), @"template\inp\导出模板.inp");
        //        if (!File.Exists(tempPath))
        //        {
        //            //MessageBox.Show($"模板文件不存在[{tempPath}]");
        //            return;
        //        }
        //        tempString = File.ReadAllText(tempPath);
        //    }
        //    else
        //    {
        //        tempString = File.ReadAllText(sourcePath);
        //    }


        //    Dictionary<string, string> dictExchange = new Dictionary<string, string>() {
        //        {"{junctions}","{0}" },
        //        {"{reservoirs}","{1}" },
        //        {"{tanks}","{2}" },
        //        {"{pipes}","{3}" },
        //        {"{valves}","{4}" },
        //        {"{pumps}","{5}" },

        //        {"{coor}","{6}" },
        //        {"{curve}","{7}" },
        //    };
        //    dictExchange.ToList().ForEach(m => tempString = tempString.Replace(m.Key, m.Value));

        //    StringBuilder junctionStringBuilder = new StringBuilder();

        //    junctionStringBuilder.AppendLine(";ID                 Elev           Demand         Pattern         Type");

        //    Nodes.ForEach(o =>
        //    {
        //        //if (!o.Visible) return;
        //        if (o is JunctionModel j)
        //            junctionStringBuilder.AppendLine(j.ToString() + $"0\tJunction");
        //        else if (o is MeterModel m)
        //            junctionStringBuilder.AppendLine(m.ToString() + $"0\tMeter");
        //        else if (o is NozzleModel no)
        //            junctionStringBuilder.AppendLine(no.ToString() + $"0\tNozzle\t{no.FlowCoefficient}");
        //    });
        //    string junctionString = junctionStringBuilder.ToString();

        //    StringBuilder reservoirStringBuilder = new StringBuilder();

        //    reservoirStringBuilder.AppendLine(";ID                 Head           Pattern ");

        //    Reservos.ForEach(o =>
        //    {
        //        //if (!o.Visible) return;
        //        reservoirStringBuilder.AppendLine(o.ToString() + $"0\t{o.Elev}");
        //    });
        //    string reserverString = reservoirStringBuilder.ToString();

        //    StringBuilder tankStringBuilder = new StringBuilder();

        //    tankStringBuilder.AppendLine(";ID                 Elevation      InitLevel      MinLevel       MaxLevel       Diameter       MinVol         VolCurve           Overflow");

        //    Tanks.ForEach(o =>
        //    {
        //        //if (!o.Visible) return;
        //        tankStringBuilder.AppendLine(o.ToString() + $"0");
        //    });
        //    string tankString = tankStringBuilder.ToString();

        //    StringBuilder pipeStringBuilder = new StringBuilder();

        //    pipeStringBuilder.AppendLine(";ID                 Node1              Node2              Length         Diameter       Roughness      MinorLoss      Status");

        //    Links.ForEach(o =>
        //    {
        //        //if (!o.Visible) return;
        //        if (o is PipeModel p)
        //            pipeStringBuilder.AppendLine(p.ToString() + $"0");
        //        //else if (o is RepeaterViewModel r)
        //        //    pipeStringBuilder.AppendLine(r.ToString());
        //    });
        //    string pipeString = pipeStringBuilder.ToString();

        //    StringBuilder valveStringBuilder = new StringBuilder();

        //    valveStringBuilder.AppendLine(";ID                 Node1              Node2              Diameter       Type   Setting        MinorLoss  ");

        //    Valves.ForEach(o =>
        //    {
        //        //if (!o.Visible) return;
        //        valveStringBuilder.AppendLine(o.ToString() + $"0");
        //    });
        //    string valveString = valveStringBuilder.ToString();

        //    StringBuilder pumpStringBuilder = new StringBuilder();

        //    pumpStringBuilder.AppendLine(";ID                 Node1              Node2              Diameter       Type   Setting        MinorLoss  ");

        //    Pumps.ForEach(o =>
        //    {
        //        //if (!o.Visible) return;
        //        pumpStringBuilder.AppendLine(o.ToString() + $"0");
        //    });
        //    string pumpString = pumpStringBuilder.ToString();


        //    StringBuilder curveStringBuilder = new StringBuilder();



        //    //pumps.ForEach(o =>
        //    //{
        //    //    if (!o.Visible || !o.Datasets.ContainsKey("流量扬程曲线")) return;
        //    //    curveStringBuilder.AppendLine(o.Datasets["流量扬程曲线"].ToString());
        //    //});
        //    if (dict_dataset != null)
        //        foreach (var kp in dict_dataset)
        //        {
        //            curveStringBuilder.AppendLine(kp.Value.ToString());
        //        }
        //    string curveString = curveStringBuilder.ToString();


        //    StringBuilder coorStringBuilder = new StringBuilder();
        //    if (userCoorString == null)
        //    {

        //        coorStringBuilder.AppendLine(";Node               X-Coord              Y-Coord");
        //        Nodes.ForEach(o => coorStringBuilder.AppendLine(o.ToCoorString()));
        //    }
        //    else
        //    {
        //        coorStringBuilder.Append(userCoorString);
        //    }



        //    string coorString = coorStringBuilder.ToString();
        //    string output = "";





        //    StringBuilder emitterStringBuilder = new StringBuilder();
        //    emitterStringBuilder.AppendLine(";Junction        \tCoefficient");
        //    Nodes.ForEach(o => emitterStringBuilder.Append(o.ToEmitterString()));



        //    string emitterString = emitterStringBuilder.ToString();





        //    StringBuilder statusStringBuilder = new StringBuilder();
        //    statusStringBuilder.AppendLine(";ID              \tStatus/Setting\r\n");
        //    Links.ForEach(o => statusStringBuilder.Append(o.ToStatusString()));



        //    string statusString = statusStringBuilder.ToString();



        //    output = tempString;

        //    output = ReplaceContent(output, "JUNCTIONS", junctionString);
        //    output = ReplaceContent(output, "RESERVOIRS", reserverString);
        //    output = ReplaceContent(output, "TANKS", tankString);
        //    output = ReplaceContent(output, "PIPES", pipeString);
        //    output = ReplaceContent(output, "VALVES", valveString);
        //    output = ReplaceContent(output, "PUMPS", pumpString);
        //    output = ReplaceContent(output, "CURVES", curveString);


        //    output = ReplaceContent(output, "COORDINATES", coorString);
        //    output = ReplaceContent(output, "EMITTERS", emitterString);
        //    output = ReplaceContent(output, "STATUS", statusString);
        //    string backupFolderPath = Path.Combine(Path.GetDirectoryName(filePath), "bk");
        //    if (!Directory.Exists(backupFolderPath))
        //    {
        //        Directory.CreateDirectory(backupFolderPath);
        //    }

        //    string backupFileName = $"{Path.GetFileNameWithoutExtension(filePath)}_{DateTime.Now:yyyyMMddHHmmss}{Path.GetExtension(filePath)}";
        //    string backupFilePath = Path.Combine(backupFolderPath, backupFileName);
        //    if (File.Exists(filePath)) File.Copy(filePath, backupFilePath, true);


        //    // 检查文件是否存在
        //    try
        //    {
        //        Global.ClearFileReadOnly(filePath);

        //        File.WriteAllText(filePath, output);
        //    }
        //    catch (Exception ex)
        //    {
        //        MessageBox.Show(ex.Message);
        //    }

        //    //MessageBox.Show($"保存成功!");
        //}
        /// <summary>
        /// 根据Inp文件计算
        /// </summary>
        /// <returns></returns>
        public virtual List<TimePoint> Calc(string InpPath)
        {
            Epanet epanet = new Epanet();
            HydraulicModel.Epanet epanet = new HydraulicModel.Epanet();
            var result = new List<TimePoint>();
            var err = epanet.open(InpPath, "d:\\5.log", "");
            if (err != 0)
@@ -651,16 +961,18 @@
            int nodeCount = 0, linkCount = 0;
            epanet.getcount((int)CountType.Node, ref nodeCount);
            epanet.getcount((int)CountType.Link, ref linkCount);
            var sb = new StringBuilder(EpaHelper.MAXID);
            const int MAXID = 31;

            var sb = new StringBuilder(MAXID);

            for (int i = 1; i < nodeCount; i++)
            {
                epanet.getnodeid(i, sb);
                var arr = System.Enum.GetValues(typeof(NodeValueType));
                var arr = System.Enum.GetValues(typeof(HydraulicModel.NodeValueType));
                for (var j = 0; j < arr.Length; j++)
                {
                    float v = 0;
                    var t = (NodeValueType)j;
                    var t = (HydraulicModel.NodeValueType)j;
                    epanet.getnodevalue(i, (int)t, ref v);
                    result.Add(new TimePoint()
                    {
@@ -673,11 +985,11 @@
            for (int i = 1; i < linkCount; i++)
            {
                epanet.getlinkid(i, sb);
                var arr = System.Enum.GetValues(typeof(LinkValueType));
                var arr = System.Enum.GetValues(typeof(HydraulicModel.LinkValueType));
                for (var j = 0; j < arr.Length; j++)
                {
                    float v = 0;
                    var t = (LinkValueType)j;
                    var t = (HydraulicModel.LinkValueType)j;
                    epanet.getlinkvalue(i, (int)t, ref v);
                    result.Add(new TimePoint()
                    {
@@ -713,17 +1025,24 @@

        private string ReplaceContent(string text, string content, string replaceString)
        {


            string str = replaceString;

            string replacedText = ReplaceCoordinatesSection(text, content, str);

            return replacedText;
            //Console.WriteLine(replacedText);
        }

        private string ReplaceCoordinatesSection(string text, string content, string str)
        public static string ReplaceCoordinatesSection(string text, string content, string str)
        {
            string pattern = $@"(\[{content}\]).*?(\[|$)";

            string replacedText = Regex.Replace(text, pattern, match =>
            {
                string section = match.Groups[2].Value.Trim();

                if (!string.IsNullOrEmpty(section))
                {
                    return $"{match.Groups[1].Value}\n{str}\n[";
@@ -733,7 +1052,9 @@
                    return $"{match.Groups[1].Value}\n{str}\n[";
                }
            }, RegexOptions.Singleline);

            return replacedText;
        }

    }
}