using DevExpress.XtraCharts;
using DevExpress.XtraEditors;
using IStation.Epanet;
using IStation.Epanet.Enums;
using IStation.Model;
using IStation.Untity;
using System;
using System.Collections.Generic;
using System.ComponentModel.DataAnnotations;
using System.Drawing;
using System.IO;
using System.Linq;
using System.Text;

namespace IStation.WinFrmUI.Monitor
{
    public partial class ModelCorrectionCombinePage : DocumentPage
    {
        public ModelCorrectionCombinePage()
        {
            InitializeComponent();
            PageTitle.Caption = "模型修正组合";

            gridView1.SetNormalView();
            gridView2.SetNormalView();
            gridView3.SetNormalView();

            colHz.Visible = false;
            colRpm.Visible = false;
            colWaterLevel.Visible = false;


            repositoryItemDateEdit1.SetOnlyShowYearMonth();
            repositoryItemDateEdit2.SetOnlyShowYearMonth();
            barEditDateStart.EditValue = new DateTime(2024, 1, 1);
            barEditDateEnd.EditValue = new DateTime(2024, 9, 1);

            cmbFlag.Properties.TextEditStyle = DevExpress.XtraEditors.Controls.TextEditStyles.DisableTextEditor;
            barCekUseFlow.Visibility = DevExpress.XtraBars.BarItemVisibility.Never;

            stationListCtrl1.FocusedChangedEvent += StationListCtrl1_FocusedChangedEvent;
            monitorDataSourcesTreeList1.FocusedChangedEvent += MonitorDataSourcesListCtrl1_FocusedChangedEvent;
            timeValueSwiftPlotChartView1.SetTimeAxisX(DevExpress.XtraCharts.DateTimeMeasureUnit.Minute);
            InitialDiagarm();
        }


        private Series _series_default_head; //
        private Series _series_curve_head; //
        private Series _series_correct_curve_head; // 

        private double _min_flow = 0;
        private double _max_flow = 100000;
        private double _space_flow = 500;
        private void InitialDiagarm()
        {
            chartControl1.Legend.Visibility = DevExpress.Utils.DefaultBoolean.False;//是否在图表上显示图例 

            var diagram = (SwiftPlotDiagram)chartControl1.Diagram;
            diagram.EnableAxisXScrolling = true;//X轴是否允许滚动
            diagram.EnableAxisXZooming = true;//X轴是否允许缩放
            diagram.PaneLayout.Direction = PaneLayoutDirection.Vertical;//窗格的对齐方式 
            diagram.AxisX.DateTimeScaleOptions.MeasureUnit = DateTimeMeasureUnit.Minute;

            _series_default_head = chartControl1.GetSeriesByName("SeriesDefaultHead");
            _series_curve_head = chartControl1.GetSeriesByName("SeriesCurveHead");
            _series_correct_curve_head = chartControl1.GetSeriesByName("SeriesCorrectCurveHead");

            _series_default_head.CrosshairLabelPattern = "监测压力:{V}";
            _series_curve_head.CrosshairLabelPattern = "模型压力:{V}";
            _series_correct_curve_head.CrosshairLabelPattern = "压力偏差:{V}";
        }


        #region ViewModel  

        public class PumpViewModel
        {

            [Display(Name = "时间")]
            public string Time { get; set; }

            [Display(Name = "泵")]
            public int Flag { get; set; }

            [Display(Name = "转速")]
            public double Rpm { get; set; }

            [Display(Name = "频率")]
            public double Hz { get; set; }

            [Display(Name = "频率")]
            public double Hz0 { get; set; }

            [Display(Name = "水位")]
            public double WaterLevel { get; set; }

            [Display(Name = "进口压力")]
            public double InletPressure { get; set; }

            [Display(Name = "出口压力")]
            public double OutletPressure { get; set; }

            [Display(Name = "模型出口压力")]
            public double ModelOutletPressure { get; set; }

            [Display(Name = "瞬时流量")]
            public double Flow { get; set; }

            [Display(Name = "模型流量")]
            public double ModelFlow { get; set; }

            [Display(Name = "流量差值")]
            public double FlowDiff { get; set; }


            [Display(Name = "压差")]
            public double PressureDiff { get; set; }

            [Display(Name = "曲线压差")]
            public double CurvePressureDiff { get; set; }

            [Display(Name = "压差差值")]
            public double PressureDiffDev { get; set; }

        }

        public class ModelCombineViewModel
        {
            public string Time { get; set; }
            public string RunFlags { get; set; }
            public double ScadaTotalFlow { get; set; }
            public double ModelTotalFlow { get; set; }
            public List<Tuple<int, double, double>> ModelDeviation { get; set; }
        }

        public class ModelDiffViewModel
        {
            [Display(Name = "时间")]
            public DateTime Date { get; set; }

            [Display(Name = "时间")]
            public string Time { get; set; }

            [Display(Name = "名称")]
            public string Name { get; set; }

            [Display(Name = "监测压力")]
            public double ScadaPressure { get; set; }

            [Display(Name = "监测流量")]
            public double ScadaFlow { get; set; }

            [Display(Name = "模型压力")]
            public double MonitorPressure { get; set; }

            [Display(Name = "模型流量")]
            public double MonitorFlow { get; set; }

            [Display(Name = "压力偏差")]
            public double PressureDiff { get; set; }

            [Display(Name = "流量偏差")]
            public double FlowDiff { get; set; }

        }


        /// <summary>
        /// 模型组合偏差
        /// </summary>   
        public class ModelCombineDiffViewModel
        {

            [Display(Name = "运行组合")]
            public string RunFlags { get; set; }

            [Display(Name = "最小流量")]
            public double MinFlow { get; set; }

            [Display(Name = "最大流量")]
            public double MaxFlow { get; set; }

            [Display(Name = "模型偏差")]
            public string ModelDeviation { get; set; }

            [Display(Name = "数量")]
            public int Count { get; set; }

        }

        public class PumpFactorViewModel
        {
            [Display(Name = "泵")]
            public int Flag { get; set; }

            [Display(Name = "频率")]
            public double Hz { get; set; }

            [Display(Name = "总体标准差")]
            public double? STDP { get; set; }

            [Display(Name = "扬程(STDP)")]
            public double? STDPHead { get; set; }


            [Display(Name = "备注")]
            public string Note { get; set; }

            public void Round()
            {
                if (STDP.HasValue)
                {
                    STDP = Math.Round(STDP.Value, 5);
                }
                if (STDPHead.HasValue)
                {
                    STDPHead = Math.Round(STDPHead.Value, 5);
                }

            }
        }


        #endregion

        private BLL.StationSignalRecordPacket _bll = new BLL.StationSignalRecordPacket();
        private Model.Station _station = null;
        private Model.MonitorDataSources _monitorDataSources = null;

        private List<Model.Equipment<Model.Pump>> _pump_list = null;
        private List<ModelDiffViewModel> _model_diff_vm_list = null;
        private List<ModelCombineViewModel> _model_combine_list = null;
        private List<ModelCombineDiffViewModel> _model_combine_diff_vm_list = null;
        private List<PumpViewModel> _pump_vm_list = null;

        private string _model_file = System.IO.Path.Combine
            (Settings.File.RootDirectory, Settings.File.DataFolder, "ch2_v3_20240801(Clear).inp");

        /// <summary>
        /// 清空数据
        /// </summary>
        public void Clear()
        {
            _pump_vm_list = new List<PumpViewModel>();
            _model_diff_vm_list = new List<ModelDiffViewModel>();
            _model_combine_list = new List<ModelCombineViewModel>();
            _model_combine_diff_vm_list = new List<ModelCombineDiffViewModel>();
            cmbFlag.SelectedItem = null;
            cmbFlag.Properties.Items.Clear();
            modelTimeViewModelBindingSource.DataSource = new List<ModelDiffViewModel>();
            modelCombineDiffViewModelBindingSource.DataSource = new List<ModelCombineDiffViewModel>();
            pumpViewModelBindingSource.DataSource = new List<PumpViewModel>();

            ClearChart();
        }

        private void ClearChart()
        {

            chartControl1.BeginInit();
            _series_default_head.Points.Clear();
            _series_curve_head.Points.Clear();
            _series_correct_curve_head.Points.Clear();
            chartControl1.EndInit();
        }

        /// <summary>
        /// 初始化数据
        /// </summary>
        public override void InitialDataSource()
        {
            stationListCtrl1.SetBindingData();
            monitorDataSourcesTreeList1.SetBindingData();
        }

        //泵站变换
        private void StationListCtrl1_FocusedChangedEvent(Model.Station obj)
        {
            _station = obj;
            WaitFrmHelper.ShowWaitForm();
            SetBindingData(_monitorDataSources, _station);
            WaitFrmHelper.HideWaitForm();

        }

        //来源变换
        private void MonitorDataSourcesListCtrl1_FocusedChangedEvent(Model.MonitorDataSources obj)
        {
            _monitorDataSources = obj;
            WaitFrmHelper.ShowWaitForm();
            SetBindingData(_monitorDataSources, _station);
            WaitFrmHelper.HideWaitForm();
        }


        /// <summary>
        /// 绑定数据
        /// </summary>
        public void SetBindingData(Model.MonitorDataSources monitorDataSources, Model.Station station)
        {

            Clear();
            if (monitorDataSources == null || station == null)
            {
                return;
            }
            if (barCekLoad.Checked)
            {
                return;
            }


            var station_index = station.SortCode;
            var dt_start = Convert.ToDateTime(barEditDateStart.EditValue);
            var dt_end = Convert.ToDateTime(barEditDateEnd.EditValue);
            var packets = _bll.Get(monitorDataSources.ID, station.ID);
            packets = packets?.Where(x => (x.Year >= dt_start.Year && x.Year <= dt_end.Year) && (x.Month >= dt_start.Month && x.Month <= dt_end.Month)).ToList();
            if (packets == null || !packets.Any())
                return;

            _pump_list = new BLL.Equipment().GetPumpListByBelongTypeAndBelongID(IStation.ObjectType.Station, station.ID);
            if (_pump_list == null || !_pump_list.Any())
            {
                return;
            }
            var flag_pump_dict = _pump_list.ToDictionary(x => x.SortCode, x => x.RatedParas);
            var flag_list = _pump_list.Select(x => x.SortCode).OrderBy(x => x).ToList();
            cmbFlag.Properties.Items.AddRange(flag_list);
            var record_list = packets.SelectMany(x => x.StationSignalRecords).ToList();

            var root_folder = Path.Combine(AppDomain.CurrentDomain.BaseDirectory, "分析");
            List<AnalysisHelper.AnalysisFactorDto> ana_factor_list = null;
            var fileName = root_folder + "\\" + "AnalysisFactor.json";
            if (File.Exists(fileName))
            {
                var json = File.ReadAllText(fileName);
                ana_factor_list = JsonHelper.Json2Object<List<AnalysisHelper.AnalysisFactorDto>>(json);
            }


            SetBindingData(_model_file, station.SortCode, flag_pump_dict, record_list, ana_factor_list, barCekUseAnalysisFactor.Checked);
        }


        /// <summary>
        /// 绑定数据
        /// </summary>
        public void SetBindingData
            (
            string model_inp,
            int station_index,
            Dictionary<int, Model.Pump> flag_pump_dict,
            List<Model.StationSignalRecord> station_record_list,
            List<AnalysisHelper.AnalysisFactorDto> ana_factor_list,
            bool use_ana_factor
            )
        {
            if (!File.Exists(model_inp))
            {
                throw new Exception($"model_inp：is null");
            }

            var bll_curve = new BLL.PumpCurve();
            var temp_id_build = new StringBuilder(31);
            var err = EpanetMethods.ENopen(_model_file, "", "");
            if ((int)err > 6)
            {
                throw new Exception($"ENopen：{err}");
            }

            err = EpanetMethods.ENopenH();
            if ((int)err > 6)
            {
                throw new Exception($"ENopenH：{err}");
            }

            var curve_point_count = 100;
            var flag_qh_curve_dict = GetFlagCurveDict();
            var pipe_flow_id_list = GlobalHelper.GetPipeFlowIdList(station_index);
            var pipe_pressure_id_list = GlobalHelper.GetPipePressureIdList(station_index);

            var pump_model_mapping_list = AnalysisHelper.GetPumpModelMappingList();
            var model_mapping_list = AnalysisHelper.GetStationMappingList();

            foreach (var item in pump_model_mapping_list)
            {
                var flag = item.Flag;

                if (EpanetMethods.ENgetlinkindex(item.PumpId, out int pump_index) != ErrorCode.Ok)
                    throw new Exception($"ENgetlinkindex：{err}");

                if (!string.IsNullOrEmpty(item.FlowId))
                {
                    if (EpanetMethods.ENgetlinkindex(item.FlowId, out int flow_index) != ErrorCode.Ok)
                        throw new Exception($"ENgetlinkindex：{err}");
                    item.FlowIndex = flow_index;
                }

                if (EpanetMethods.ENgetnodeindex(item.PressureId, out int pressure_index) != ErrorCode.Ok)
                    throw new Exception($"ENgetnodeindex：{err}");

                if (EpanetMethods.ENgetcurveindex(item.CurveId, out int curve_index) != ErrorCode.Ok)
                    throw new Exception($"ENgetcurveindex：{err}");

                item.PumpIndex = pump_index;
                item.PressureIndex = pressure_index;
                item.CurveIndex = curve_index;


                var qh = flag_qh_curve_dict[flag];
                var fit_point_list = qh.GetFitPoints(curve_point_count);
                var flow_list = fit_point_list.Select(x => (float)x.X).ToArray();
                var head_list = fit_point_list.Select(x => (float)x.Y).ToArray();


                var cek = CheckFitPointList(fit_point_list, curve_point_count);
                if (!cek)
                {
                    throw new Exception($"CheckFitPointList: false");
                }
                err = EpanetMethods.ENsetcurve(item.CurveIndex, flow_list, head_list, curve_point_count);
                if (err != 0)
                {
                    throw new Exception($"ENsetcurve：{err}");
                }
            }

            foreach (var item in model_mapping_list)
            {

                if (EpanetMethods.ENgetlinkindex(item.FlowId, out int flow_index) != ErrorCode.Ok)
                    throw new Exception($"ENgetlinkindex：{err}");

                if (EpanetMethods.ENgetnodeindex(item.PressureId, out int pressure_index) != ErrorCode.Ok)
                    throw new Exception($"ENgetnodeindex：{err}");

                item.PressureIndex = pressure_index;
                item.FlowIndex = flow_index;

            }

            var pump_model_mapping_dict = pump_model_mapping_list.ToDictionary(x => x.Flag, y => y);
            var pattern_id_list = AnalysisHelper.GetPatternIdList();
            var pattern_id_dict = new Dictionary<string, int>();
            foreach (var id in pattern_id_list)
            {
                if (EpanetMethods.ENgetpatternindex(id, out int index) != ErrorCode.Ok)
                    continue;
                pattern_id_dict.Add(id, index);
            }

            var run_flags = new List<int>() { 22, 23, 25 };

            var vm_list = new List<PumpViewModel>();
            var vm_combine_list = new List<ModelCombineViewModel>();
            var vm_diff_list = new List<ModelDiffViewModel>();
            foreach (var station_record in station_record_list)
            {
                var model_record_dict = station_record.ModelRecordDict;
                var pipe_flow_err = true;
                var pipe_pressure_err = true;
                foreach (var id in pipe_flow_id_list)
                {
                    if (model_record_dict[id] < 1)
                    {
                        pipe_flow_err = false;
                        break;
                    }
                }
                foreach (var id in pipe_pressure_id_list)
                {
                    var value = model_record_dict[id];
                    if (value < 1 || value > 40)
                    {
                        pipe_pressure_err = false;
                        break;
                    }
                }
                if (!pipe_flow_err || !pipe_pressure_err)
                {
                    continue;
                }


                var time = station_record.Time.ToString("G");
                var pump_record_list = station_record.PumpSignalRecords;
                var total_flow = station_record.TotalFlow;
                var total_pressure = station_record.TotalPressure;
                var pump_total_flow = pump_record_list.Sum(x => x.FlowRate);
                var diff_flow = station_record.DiffFlow;
                //if (total_pressure < 20|| total_pressure>60)
                //{
                //    continue;
                //}
                if (total_pressure < 0)
                {
                    continue;
                }
                if (total_flow <= 0 && pump_total_flow <= 0)
                {
                    continue;
                }
                if (pump_total_flow > 0 && Math.Abs(diff_flow) > 2000)
                {
                    continue;
                }
                //if (station_record.Time.Month==4&& station_record.Time.Day==17)
                //{
                //    continue;
                //}


                //if (station_record.Time > new DateTime(2024,4,29)&& station_record.Time < new DateTime(2024, 5, 15))
                //{
                //    continue;
                //}

                var pump_run_flags = pump_record_list.Select(x => x.Flag).OrderBy(x => x).ToList();
                if (pump_record_list.Exists(x => x.Flag != 15 && x.Flag != 16 && x.Rpm < 1))
                {
                    continue;
                }

                //if (pump_record_list.Exists(x => x.FlowRate < 1))
                //{
                //    continue;
                //}

                if (pump_record_list.Exists(x => x.OutletPressure > 50))
                {
                    continue;
                }

                if (ana_factor_list != null && ana_factor_list.Any() && use_ana_factor)
                {
                    foreach (var pump_record in pump_record_list)
                    {
                        var flag = pump_record.Flag;
                        var pump = flag_pump_dict[flag];
                        var mapping = pump_model_mapping_dict[flag];
                        var rpm_ratio = pump_record.Rpm / pump.Nr;
                        if (!pump.IsBp)
                            rpm_ratio = 1;
                        if (rpm_ratio <= 0.1)
                            continue;

                        var hz0 = Math.Round(rpm_ratio * 50, 0);
                        if (hz0 > 50)
                            hz0 = 50;
                        var ana_factor = ana_factor_list.Find(x => x.Hz == hz0 && x.Flag == flag);
                        if (ana_factor == null)
                        {
                            throw new Exception($"ana_factor：is null");
                        }
                        var qh = flag_qh_curve_dict[flag];
                        var head_dev = (float)ana_factor.HeadDeviation;
                        var fit_point_list = new List<Model.CurvePoint>(curve_point_count);
                        if (head_dev == 0)
                        {
                            fit_point_list = qh.GetFitPoints(curve_point_count);
                        }
                        else
                        {
                            var pt_list_ct = qh.DefinePoints.Select(x => new Model.CurvePoint(x.X, x.Y + head_dev)).ToList();
                            var qh_ct = Model.FitCurveHelper.BuildCurveExpress(pt_list_ct, Model.eCurveFitType.CubicCurve);
                            fit_point_list = qh_ct.GetFitPoints(curve_point_count);
                        }

                        var x_list = fit_point_list.Select(x => (float)x.X).ToList();
                        var y_list = fit_point_list.Select(x => (float)x.Y).ToList();


                        err = EpanetMethods.ENsetcurve(mapping.CurveIndex, x_list.ToArray(), y_list.ToArray(), curve_point_count);
                        if ((int)err > 6)
                        {
                            throw new Exception($"ENsetcurve：{err}");
                        }
                    }
                }

                foreach (var pattern in pattern_id_dict)
                {
                    var pattern_id = pattern.Key;
                    var pattern_index = pattern.Value;
                    var pattern_value = 0f;
                    if (model_record_dict.ContainsKey(pattern_id))
                    {
                        pattern_value = (float)model_record_dict[pattern_id];
                    }
                    err = EpanetMethods.ENsetpattern(pattern_index, new float[] { pattern_value }, 1);
                    if ((int)err > 6)
                    {
                        throw new Exception($"ENsetpattern：{err}");
                    }
                }

                err = EpanetMethods.ENinitH(0);
                if ((int)err > 6)
                {
                    throw new Exception($"ENinitH：{err}");
                }

                err = EpanetMethods.ENrunH(out _);
                if ((int)err > 6)
                {
                    throw new Exception($"ENrunH：{err}");
                }
                var flags = pump_record_list.Select(x => x.Flag).OrderBy(x => x).ToList();

                var vm_combine = new ModelCombineViewModel();
                vm_combine.Time = time;
                vm_combine.RunFlags = IStation.Untity.IntListHelper.ToString(flags);
                vm_combine.ModelDeviation = new List<Tuple<int, double, double>>();
                vm_combine_list.Add(vm_combine);

                foreach (var pump_record in pump_record_list)
                {
                    var flag = pump_record.Flag;
                    var pump = flag_pump_dict[flag];
                    var qh = flag_qh_curve_dict[flag];
                    var mapping = pump_model_mapping_dict[flag];
                    var rpm = pump_record.Rpm;
                    if (!pump.IsBp)
                        rpm = pump.Nr;
                    if (rpm == 0)
                        break;

                    var hz = Math.Round(rpm / pump.Nr * 50, 2);
                    if (hz > 50)
                        hz = 50;
                    var hz0 = Math.Round(hz, 0);
                    var wl = pump_record.WaterLevel;
                    var inlet_pressure = Model.CurveCalcuHelper.Mpa2M(pump_record.InletPressure);
                    var outlet_pressure = Model.CurveCalcuHelper.Mpa2M(pump_record.OutletPressure);
                    var pressure_diff = outlet_pressure - inlet_pressure;
                    var flow = pump_record.FlowRate;
                    var curve_head = pump_record.Head;


                    err = EpanetMethods.ENgetlinkvalue(mapping.PumpIndex, LinkValue.Flow, out float model_flow);
                    if ((int)err > 6)
                    {
                        throw new Exception($"ENgetnodevalue：{err}");
                    }

                    err = EpanetMethods.ENgetnodevalue(mapping.PressureIndex, NodeValue.Pressure, out float model_outlet_pressure);
                    if ((int)err > 6)
                    {
                        throw new Exception($"ENgetnodevalue：{err}");
                    }

                    model_flow = Math.Abs(model_flow);
                    model_outlet_pressure = Math.Abs(model_outlet_pressure);
                    var model_pressure_diff = model_outlet_pressure - inlet_pressure;

                    var flow_diff = flow - model_flow;
                    var pressure_diff_dev = pressure_diff - model_pressure_diff;

                    var vm = new PumpViewModel();
                    vm.Time = time;
                    vm.Rpm = rpm;
                    vm.Flag = flag;
                    vm.Hz = hz;
                    vm.Hz0 = hz0;
                    vm.WaterLevel = wl;
                    vm.InletPressure = Math.Round(inlet_pressure, 2);
                    vm.OutletPressure = Math.Round(outlet_pressure, 2);
                    vm.PressureDiff = Math.Round(pressure_diff, 2);

                    vm.Flow = Math.Round(flow, 1);
                    vm.ModelFlow = Math.Round(model_flow, 1);
                    vm.ModelOutletPressure = Math.Round(model_outlet_pressure, 2);
                    vm.CurvePressureDiff = Math.Round(model_pressure_diff, 2);
                    vm.PressureDiffDev = Math.Round(pressure_diff_dev, 3);
                    vm.FlowDiff = Math.Round(flow_diff, 1);
                    vm_list.Add(vm);


                    var calc_flow = flow > 0 ? flow : model_flow;
                    var dif_flow = flow - model_flow;

                    vm_combine.ScadaTotalFlow += flow < 1 ? model_flow : flow;
                    vm_combine.ModelTotalFlow += model_flow;
                    vm_combine.ModelDeviation.Add(new Tuple<int, double, double>(flag, calc_flow, pressure_diff_dev));
                }


                foreach (var mapping in model_mapping_list)
                {
                    if (!model_record_dict.ContainsKey(mapping.ScadaPressureId))
                    {
                        continue;
                    }
                    if (!model_record_dict.ContainsKey(mapping.ScadaFlowId))
                    {
                        continue;
                    }
                    var flow = model_record_dict[mapping.ScadaFlowId];
                    var outlet_pressure = model_record_dict[mapping.ScadaPressureId];

                    err = EpanetMethods.ENgetlinkvalue(mapping.FlowIndex, LinkValue.Flow, out float model_flow);
                    if ((int)err > 6)
                    {
                        throw new Exception($"ENgetnodevalue：{err}");
                    }

                    err = EpanetMethods.ENgetnodevalue(mapping.PressureIndex, NodeValue.Pressure, out float model_outlet_pressure);
                    if ((int)err > 6)
                    {
                        throw new Exception($"ENgetnodevalue：{err}");
                    }

                    var flow_diff = flow - model_flow;
                    var pressure_diff = outlet_pressure - model_outlet_pressure;

                    var vm = new ModelDiffViewModel();
                    vm.Date = station_record.Time;
                    vm.Time = time;
                    vm.Name = mapping.Name;
                    vm.ScadaFlow = Math.Round(flow, 1);
                    vm.ScadaPressure = Math.Round(outlet_pressure, 3);
                    vm.MonitorFlow = Math.Round(model_flow, 1);
                    vm.MonitorPressure = Math.Round(model_outlet_pressure, 3);
                    vm.FlowDiff = Math.Round(flow_diff, 1);
                    vm.PressureDiff = Math.Round(pressure_diff, 3);
                    vm_diff_list.Add(vm);
                }
            }

            err = EpanetMethods.ENcloseH();
            if ((int)err > 6)
            {
                throw new Exception($"ENcloseH：{err}");
            }
            err = EpanetMethods.ENclose();
            if ((int)err > 6)
            {
                throw new Exception($"ENclose：{err}");
            }

            if (!vm_combine_list.Any())
            {
                Clear();
                return;
            }
            var run_flags_flow_pressure_diff_dict = vm_combine_list
             .Select(x => new Tuple<string, double, List<Tuple<int, double, double>>>(x.RunFlags, x.ScadaTotalFlow, x.ModelDeviation))
             .ToList();


            var ana_dev_list = AnalysisHelper.GetAnalysisDeviationDtoList(flag_pump_dict, run_flags_flow_pressure_diff_dict, _min_flow, _max_flow, _space_flow);
            ////test
            //if (station_index == 2)
            //{
            //    foreach (var item in ana_dev_list)
            //    {
            //        var count = item.PressureDiff.Count;
            //        for (int i = 0; i < count; i++)
            //        {
            //            var src_i = item.PressureDiff.ElementAt(i);
            //            var src_v = item.PressureDiff[src_i.Key];
            //            item.PressureDiff[src_i.Key] = src_v < 0 ? Math.Abs(src_v) : -src_v;
            //        }
            //    }
            //}
            var vm_combine_diff_list = ana_dev_list?.Select(x => new ModelCombineDiffViewModel()
            {
                RunFlags = IStation.Untity.IntListHelper.ToString(x.RunFlags),
                MinFlow = x.MinFlow,
                MaxFlow = x.MaxFlow,
                ModelDeviation = JsonHelper.Object2Json(x.PressureDiff),
                Count = x.Count
            }).ToList();


            _model_combine_list = vm_combine_list;
            //SetBindingData(vm_diff_list);

            _model_diff_vm_list = vm_diff_list;
            modelTimeViewModelBindingSource.DataSource = _model_diff_vm_list;
            modelTimeViewModelBindingSource.ResetBindings(false);
            gridView3.BestFitColumns();

            _pump_vm_list = vm_list;
            pumpViewModelBindingSource.DataSource = vm_list;
            pumpViewModelBindingSource.ResetBindings(false);
            gridView1.BestFitColumns();

            _model_combine_diff_vm_list = vm_combine_diff_list;
            modelCombineDiffViewModelBindingSource.DataSource = vm_combine_diff_list;
            modelCombineDiffViewModelBindingSource.ResetBindings(false);
            gridView2.BestFitColumns();


        }

        private void SetBindingData(List<ModelDiffViewModel> vm_list)
        {
            timeValueSwiftPlotChartView1.ClearSeries();
            if (vm_list == null || !vm_list.Any())
            {
                return;
            }

            var flow_dict = new Dictionary<string, List<TimeValue>>();
            var pressure_dict_dict = new Dictionary<string, List<TimeValue>>();

            var group = vm_list.GroupBy(x => x.Name);
            for (int i = 0; i < group.Count(); i++)
            {
                var color = GetRandomColor(i);
                var item = group.ElementAt(i);
                var name = item.Key;
                //var scada_flow_list = item.Select(x => new TimeValue(x.Date, x.ScadaFlow)).ToList();
                //var model_flow_list = item.Select(x => new TimeValue(x.Date, x.MonitorFlow)).ToList();
                //var flow_diff_list = item.Select(x => new TimeValue(x.Date, x.FlowDiff)).ToList();

                //var scada_pressure_list = item.Select(x => new TimeValue(x.Date, x.ScadaPressure)).ToList();
                //var model_pressure_list = item.Select(x => new TimeValue(x.Date, x.MonitorPressure)).ToList();
                var pressure_diff_list = item.Where(x => !(Math.Abs(x.PressureDiff) > 2)).Select(x => new TimeValue(x.Date, x.PressureDiff)).ToList();

                //this.timeValueSwiftPlotChartView1.AddSwiftPlotSeries(name, color, name + "(监测流量)", "流量", scada_flow_list);
                //this.timeValueSwiftPlotChartView1.AddSwiftPlotSeries(name, color, name + "(模型流量)", "流量", model_flow_list);
                //this.timeValueSwiftPlotChartView1.AddSwiftPlotSeries(name, color, name + "(偏差流量)", "流量", flow_diff_list);


                // this.timeValueSwiftPlotChartView1.AddSwiftPlotSeries(name, color, name + "(监测压力)", "压力", scada_pressure_list);
                //this.timeValueSwiftPlotChartView1.AddSwiftPlotSeries(name, color, name + "(模型压力)", "压力", model_pressure_list);
                timeValueSwiftPlotChartView1.AddSwiftPlotSeries(name, color, name + "(偏差压力)", "压力", pressure_diff_list);
            }
        }

        #region Color

        private List<Color> ColorArray = new List<Color>()
        { Color.Red, Color.Blue, Color.Green, Color.DodgerBlue,
            Color.Fuchsia, Color.MidnightBlue, Color.Maroon,
            Color.Aquamarine, Color.Bisque, Color.BurlyWood
        };

        /// <summary>
        /// 获取随机颜色
        /// </summary>
        /// <returns></returns>
        private Color GetRandomColor(int count)
        {
            if (count < ColorArray.Count)
            {
                return ColorArray[count];
            }

            return ColorHelper.GetRandomColor();
        }
        #endregion

        bool CheckFitPointList(List<CurvePoint> fit_point_list, int nPoints)
        {
            var arr = fit_point_list.ToArray();
            var max_y = fit_point_list[0].Y;
            for (int j = 1; j < nPoints; j++)
            {
                if (arr[j].Y > max_y)
                {
                    return false;
                }
                else
                {
                    max_y = fit_point_list.Take(j).Max(x => x.Y);
                }
            }
            return true;
        }


        private Dictionary<int, Model.CurveExpress> GetFlagCurveDict()
        {
            var dict = new Dictionary<int, Model.CurveExpress>();
            var bll_curve = new BLL.PumpCurve();
            var station_list = new BLL.Station().GetAll();
            foreach (var station in station_list)
            {
                var eq_list = new BLL.Equipment().GetPumpListByBelongTypeAndBelongID(IStation.ObjectType.Station, station.ID);
                if (eq_list == null || !eq_list.Any())
                {
                    return default;
                }

                foreach (var eq in eq_list)
                {
                    Model.CurveExpress qh = null;
                    var curve_info = bll_curve.GetDefaultWorkingByPumpID(eq.ID)?.CurveInfo;
                    if (curve_info != null)
                    {
                        qh = curve_info.CurveQH;
                    }
                    dict.Add(eq.SortCode, qh);
                }
            }

            return dict;
        }


        private void cmbFlag_SelectedIndexChanged(object sender, EventArgs e)
        {
            ClearChart();
            if (_pump_vm_list == null || !_pump_vm_list.Any())
            {
                return;
            }
            if (!int.TryParse(cmbFlag.Text, out int flag))
            {
                return;
            }
            var vm_list = _pump_vm_list.Where(x => x.Flag == flag).ToList();
            if (vm_list == null || !vm_list.Any())
            {
                return;
            }
            chartControl1.BeginInit();
            foreach (var vm in vm_list)
            {
                var time = vm.Time;
                var diff = vm.ModelOutletPressure - vm.OutletPressure;
                if (Math.Abs(diff) > 4)
                {
                    continue;
                }
                _series_default_head.Points.Add(new SeriesPoint(time, vm.OutletPressure));
                _series_curve_head.Points.Add(new SeriesPoint(time, vm.ModelOutletPressure));
                _series_correct_curve_head.Points.Add(new SeriesPoint(time, Math.Round(diff, 2)));
            }

            chartControl1.EndInit();
        }


        //加载
        private void barCekLoad_CheckedChanged(object sender, DevExpress.XtraBars.ItemClickEventArgs e)
        {
            WaitFrmHelper.ShowWaitForm();
            SetBindingData(_monitorDataSources, _station);
            WaitFrmHelper.HideWaitForm();
        }


        // 刷新数据
        private void barBtnRefresh_ItemClick(object sender, DevExpress.XtraBars.ItemClickEventArgs e)
        {
            InitialDataSource();
        }

        private void barBtnExportAnalysisDev_ItemClick(object sender, DevExpress.XtraBars.ItemClickEventArgs e)
        {
            if (_monitorDataSources == null || _station == null)
            {
                return;
            }
            if (_pump_list == null || !_pump_list.Any())
            {
                return;
            }
            if (_model_combine_list == null || !_model_combine_list.Any())
            {
                return;
            }

            WaitFrmHelper.ShowWaitForm("正在导出");
            var run_flags_flow_pressure_diff_dict = _model_combine_list
                .Select(x => new Tuple<string, double, List<Tuple<int, double, double>>>(x.RunFlags, x.ScadaTotalFlow, x.ModelDeviation))
                .ToList();
            var bol = AnalysisHelper.SaveAnalysisDeviationDtoList(_station.SortCode, _pump_list, run_flags_flow_pressure_diff_dict, _min_flow, _max_flow, _space_flow);
            if (!bol)
            {
                XtraMessageBox.Show("导出失败!");
                return;
            }
            WaitFrmHelper.HideWaitForm();
            AlertTool.ShowInfo(System.Windows.Forms.Application.OpenForms[0], "提示", "导出完成！");

        }
    }


}